3pcs Electronic DIY LED Dimming Lights Series and Parallel Circuit Technology Small Production Kit
$10.56
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The purpose of the experiment
1. Understand and recognize the light-emitting diodes and illuminate the light-emitting diodes (LEDs);
2. Understand the role of understanding resistance, series and parallel resistance;
3. Understand the self-locking switch;
4. Understand and recognize adjustable resistors and use adjustable resistors;
Experimental steps
Step 1:The long leg of the light-emitting diode (LED) is the positive pole, and the short leg is the negative pole. First, the long wire of the LED is connected to the black wire (negative electrode) of the battery case, and the short leg of the LED is connected to the red wire (positive electrode) of the battery case. At this time, the light emitting diode (LED) is not lit. Then send it over again, let the long leg of the LED connect to the red line of the battery box, and the short leg of the LED is connected to the black line of the battery box. At this time, the LED lights up, indicating that the LED is in one-way operation and the single-pass characteristic of the diode .
Step 2:In the circuit of the experimental step 1, a resistor of 220 ohms is inserted in series, and the brightness of the LED lamp is lowered, and the resistance hinders the current.
Step 3:Connect a 220 ohm resistor in parallel with the resistance in the circuit of the experimental board 2. The brightness of the LED is increased, indicating that the total resistance of the resistor in the circuit is reduced after the resistors are connected in parallel.
Step 4:Change the two resistors of the experimental step 3 from parallel to series. After the series connection, the brightness of the LED lamp is the lowest. After the series connection of the resistors, the total resistance of the resistor in the circuit increases.
Step 5:Replace the original resistor with a potentiometer. The potentiometer has 3 feet, and the resistance of pins 1 and 3 is fixed. The resistance of pins 1 and 2, 2 feet and 3 feet can be changed by adjusting the potentiometer knob. When experimenting, you can pick up 2 of them. The foot has to experiment many times, adjust the potentiometer knob to observe the change of LED brightness, so that you can fully understand the potentiometer.
Step 6:Know the self-locking. Press and wait for the light to be on, then press the light to turn off.
Package included
3 x DIY LED Dimming Lights Technology Small Production Kit
Weight | 0.081 kg |
---|
Customers Also Viewed
500pcs 0805 (2012) SMD White LED Chip Surface Mount SMT Beads Ultra Bright Light Emitting Diode LED Lamp Electronics Components
$26.89Electronic Accessories & SuppliesAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionQuantity:500 pieces Size:2.0 x 1.2 (mm) / 0.08 x 0.05 (inch)Emitting Color:White (6000K-9000K)Luminous Intensity:180-210mcdViewing Angle:120 DegreeForward Voltage / Current:3V-3.2V | 20mAPolarity:Refer to the Arrow on the Reverse SidePackage included500 x 0805 (2012) …
5pcs AC 100-240V to DC 12V 5A 60W Switching Power Supply Module Driver Adapter LED Strip Light
$52.97Power Supply ModuleAdd to cartFeatures1. Good anti-interference performance and high reliability.2. Low operating temperature and long service life.3. Wide input voltage range, (100-240V) in line with global usage standards.4. Good insulation performance and high electric strength.5. Full load high temperature burning machine, 100% aging test.SpecificationsModel:HS-60-12DC output voltage:12VOutput voltage tolerance:±1%Rated output current:5AOutput current range:0 – 5ARipple and noise:100mVp-pLine stability:±0.5%Load stability:±0.5%DC …
4Pcs 5mm Reusable Clear Bent Glass Drinking Straws Water Juice Straws with Cleaning Brush
$22.26Bottles & JarsAdd to cartSpecificationColor:ClearMaterial:High Borosilicate GlassTube Mouth Shape:RoundTemperature Resistance:-20~450℃Total Length:21.5cm / 8.46inchInner Diameter:0.5cmFeatures– Non-toxic environmentally friendly green borosilicate heat-resistant material, safe to use, not stain, will not fade.– Widely used, can drink water, milk, juice, coffee, coke, soda, etc.– Could put it into the microwave for sterilization.Package Included4 x Glass Drinking Straws1 x Cleaning Brush
5Pcs Car Window Sun Visor Screen Car Side Rear Window Screen Sunshade Shield Curtain
$19.83Mesh & Wire ClothAdd to cartDescriptions5Pcs Car Window Sun Visor Screen Car Side Rear Window Screen Sunshade Shield CurtainSpecificationsSizeRear Sun Visor:50 * 100 CmThe Front Side Of The Sun Visor:36 * 44 CmThe Back Side Of The Sun Visor:36 * 44 CmMaterial:3D Photocatalyst MeshWeight:Approx.60 gFeatures– Convenient to use and take down with two suckers.– Can reflect 90% direct sunlight and …
5Pcs Car Window Sun Visor Screen Car Side Rear Window Screen Sunshade Shield CurtainRead More
5Pcs Micro USB TP4056 Charge And Discharge Protection Module Over Current Over Voltage Protection
$9.32Battery Protection ModuleAdd to cartCharacteristicOn-board TP4056 lithium battery charging management chipOn-board micro USB head, can be directly connected with most of the smart phone charger as the input side to the lithium battery chargingReserved IN+ and IN- input port, convenient user DIYOn-board charging status indicatorSupport charge discharge over current protectionChip with constant current and constant pressure, full automatic stopSupports …
Keyes Brick TEMT6000 Light Sensor(Pad hole) Analog Signal Module with Pin Header Version
$6.10Sensor & Detector ModuleAdd to cartDescriptionThis is a commonly used TEMT6000 light sensor which mainly uses TEMT6000X01 components. The component is a highly sensitive visible light sensitive (NPN) transistor. The sensor can magnify the change of the tiny light rays captured about 100 times, and is easily recognized by the microcontroller for AD conversion. Its response to visible light illumination …
Keyes Brick TEMT6000 Light Sensor(Pad hole) Analog Signal Module with Pin Header VersionRead More
100W18V Foldable Portable Monocrystalline Solar Panel with 5V USB Port
$301.75Smart Robot & Solar PanelAdd to cartFeatures– The outermost layer of the product is made of thick and breathable nylon bag. It`s easy to carry and portable coz it`s folable and has a handle, which is suitable for camping, hiking, hiking, and can be used as a backup power source for mobile phones and car batteries.– It`s equipped a USB&DC junction …
100W18V Foldable Portable Monocrystalline Solar Panel with 5V USB PortRead More
GY-213V-HDC1080 High Accuracy Digital Humidity Sensor with Temperature Sensor
$15.30Sensor & Detector ModuleAdd to cartDescriptionThe HDC1080 is a digital humidity sensor with integrated temperature sensor that provides excellent measurement accuracy at very low power. The HDC1080 operates over a wide supply range, and is a low cost, low power alternative to competitive solutions in a wide range of common applications. The humidity and temperature sensors are factory calibrated.FeaturesRelative Humidity …
GY-213V-HDC1080 High Accuracy Digital Humidity Sensor with Temperature SensorRead More
Reviews
There are no reviews yet.