10pcs Electronic DIY LED Dimming Lights Series and Parallel Circuit Technology Small Production Kit
$29.32
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The purpose of the experiment
1. Understand and recognize the light-emitting diodes and illuminate the light-emitting diodes (LEDs);
2. Understand the role of understanding resistance, series and parallel resistance;
3. Understand the self-locking switch;
4. Understand and recognize adjustable resistors and use adjustable resistors;
Experimental steps
Step 1:The long leg of the light-emitting diode (LED) is the positive pole, and the short leg is the negative pole. First, the long wire of the LED is connected to the black wire (negative electrode) of the battery case, and the short leg of the LED is connected to the red wire (positive electrode) of the battery case. At this time, the light emitting diode (LED) is not lit. Then send it over again, let the long leg of the LED connect to the red line of the battery box, and the short leg of the LED is connected to the black line of the battery box. At this time, the LED lights up, indicating that the LED is in one-way operation and the single-pass characteristic of the diode .
Step 2:In the circuit of the experimental step 1, a resistor of 220 ohms is inserted in series, and the brightness of the LED lamp is lowered, and the resistance hinders the current.
Step 3:Connect a 220 ohm resistor in parallel with the resistance in the circuit of the experimental board 2. The brightness of the LED is increased, indicating that the total resistance of the resistor in the circuit is reduced after the resistors are connected in parallel.
Step 4:Change the two resistors of the experimental step 3 from parallel to series. After the series connection, the brightness of the LED lamp is the lowest. After the series connection of the resistors, the total resistance of the resistor in the circuit increases.
Step 5:Replace the original resistor with a potentiometer. The potentiometer has 3 feet, and the resistance of pins 1 and 3 is fixed. The resistance of pins 1 and 2, 2 feet and 3 feet can be changed by adjusting the potentiometer knob. When experimenting, you can pick up 2 of them. The foot has to experiment many times, adjust the potentiometer knob to observe the change of LED brightness, so that you can fully understand the potentiometer.
Step 6:Know the self-locking. Press and wait for the light to be on, then press the light to turn off.
Package included
10 x DIY LED Dimming Lights Technology Small Production Kit
Weight | 0.27 kg |
---|
Customers Also Viewed
B0505XT-2WR2 5V to 5V Isolation Power Supply Chip Module input 4.5-5.5V Output 5V
$8.78Power Supply ModuleAdd to cart>>>Manual:Click here to openOverviewThe B_XT-2WR2 family is designed for applications in board power systems that require a set of voltages that are isolated from the input supply. This product is suitable for1. The input power supply voltage is relatively stable (voltage variation range ±10% Vin);2. Requirements isolation between input and output (isolation voltage ≤ 1500VDC);3. …
B0505XT-2WR2 5V to 5V Isolation Power Supply Chip Module input 4.5-5.5V Output 5VRead More
550W 120mm Fan ATX SATA PCI-E Power Supply for intel AMD PC Unit
$111.36Voltage Regulators/StabilizersAdd to cartSpecificationPower standard::ATX 12VFor CPU range::AMD, IntelPFC type::Passive PFCVoltage:170V-270VRated power:550WAuthentication::CB, CCC, FCC, class, B, CE, ROHSProduct weight::1228gSupport system::VISTA, Win7 operating systemSupport power supply::20P and 24P motherboardPower output design:Multiplex +12VIDE interface:3SATA interface:3CPU interface::8 pins*1Video card interface::6P*1Feature-High efficiency energy-saving silent fan.-Adopt 12cm hydraulic bearing fan, mute and durable, large air flow.-Maximum power of 550 watts, suitable for high-end …
550W 120mm Fan ATX SATA PCI-E Power Supply for intel AMD PC UnitRead More
5Pcs Waterproof 12-60V Electric Universal Battery Voltage Meter Battery Power indicator 12V/24V/36V/48V – Blue
$48.44Electronic Accessories & SuppliesAdd to cartDescriptionVoltage tolerance:± 2%8-level:10% 25% 40% 50% 60% 75% 90% fullWorking current:5–15 maRefresh speed:about 300mS onceDisplay mode:Three 0.56 inchLED digital tubeDisplay color:BlueLead length:15cmDimensions:58 * 29 * 23mm length X width X thicknessCut-out size:55 * 27mmWorking temperature:-10 → ~ 65 →Package included5 x Waterproof 12-60V Electric Universal Battery Voltmeter
10pcs 5V 2 Channel Relay Module Control Board with Optocoupler Protection
$32.80Relay ModuleAdd to cartFeaturesThe capacity of relay contact:250V 10AWith Opto-couplers protection, it is suitable for .Rated current:60mAInput voltage:0~5VVCC system power supply.Type:2 channel relay module.Package included10 x Two-way relay module
10Pcs Length 150mm OD 7mm 2mm Thick Wall Borosilicate Glass Blowing Tube Lab Factory School Home
$22.26Lab TubesAdd to cartDescriptionHigh quality borosilicate glass, Premium 3.3 borosilicate tubing, preferred by scientific glassblowers world-wide.HEAVY wall tubing 10 pieces, 7mm outside diameter with a 2mm wall – all approximately 150mm long. This glass tube bends easily with propane (LPG) and oxygen mix. Brand new, high quality, heat and corrosion resistant.SpecificationName:10Pcs 150mm OD 7mm 2mm Thick Wall Borosilicate …
51Single Chip + HC-SR04 Ultrasonic Ranging Sensor Module Ultrasonic Range Finder Reversing Radar Alarm with Display
$19.67Sensor & Detector ModuleAdd to cart>>>Manual:Click here to openDescriptionsThe ultrasonic range finder of single chip microcomputer is designed by single chip microcomputer + HC-SR04 ultrasonic sensor + digital tube + button + buzzer.1. Button description:From the first one on the left, – button, + button, setting button.2. Single-chip model:STC89C52/51, AT89S52 optional, default STC89C52.3. The alarm distance can be set. After …
3Pcs DC-DC 9V/12V/24V/36V To 5V Dual USB Buck Module Vehicle Charging Solar 3A Voltage Regulator
$19.95Boost & Buck ModuleAdd to cartDescriptionInput:6-40V(5.5*2.1mm plug)Output:5V/3A MAX(with Iphone identification resistor)Efficiency:92% MAXSwitching frequency:150KHzWorking temperature:-40→-85→Size:50*35*12mmLoad capacity:Max output 3A (can charge two mobile phones at the same time)Scope of application:mobile power, mobile phones, tablet, USB5V power supply equipmentPackage included3 x Dual USB Buck Module
12V DC infrared Remote Control Full-function Precision Delay Cycle Timing Relay Module with LED Digital Display with Remote Controller
$13.11Relay ModuleAdd to cart>>>Manual:Click here to openFeatures-The product delay time can be set by the remote control. After setting, it will display and work according to the set value countdown after the next power-on;-Delay time is 0.1% per second, delay range is 0-999 seconds, LED changes every 1 second; delay range is 0-999 minutes, LED digital display changes …
Reviews
There are no reviews yet.