10pcs Electronic DIY LED Dimming Lights Series and Parallel Circuit Technology Small Production Kit
$29.32
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The purpose of the experiment
1. Understand and recognize the light-emitting diodes and illuminate the light-emitting diodes (LEDs);
2. Understand the role of understanding resistance, series and parallel resistance;
3. Understand the self-locking switch;
4. Understand and recognize adjustable resistors and use adjustable resistors;
Experimental steps
Step 1:The long leg of the light-emitting diode (LED) is the positive pole, and the short leg is the negative pole. First, the long wire of the LED is connected to the black wire (negative electrode) of the battery case, and the short leg of the LED is connected to the red wire (positive electrode) of the battery case. At this time, the light emitting diode (LED) is not lit. Then send it over again, let the long leg of the LED connect to the red line of the battery box, and the short leg of the LED is connected to the black line of the battery box. At this time, the LED lights up, indicating that the LED is in one-way operation and the single-pass characteristic of the diode .
Step 2:In the circuit of the experimental step 1, a resistor of 220 ohms is inserted in series, and the brightness of the LED lamp is lowered, and the resistance hinders the current.
Step 3:Connect a 220 ohm resistor in parallel with the resistance in the circuit of the experimental board 2. The brightness of the LED is increased, indicating that the total resistance of the resistor in the circuit is reduced after the resistors are connected in parallel.
Step 4:Change the two resistors of the experimental step 3 from parallel to series. After the series connection, the brightness of the LED lamp is the lowest. After the series connection of the resistors, the total resistance of the resistor in the circuit increases.
Step 5:Replace the original resistor with a potentiometer. The potentiometer has 3 feet, and the resistance of pins 1 and 3 is fixed. The resistance of pins 1 and 2, 2 feet and 3 feet can be changed by adjusting the potentiometer knob. When experimenting, you can pick up 2 of them. The foot has to experiment many times, adjust the potentiometer knob to observe the change of LED brightness, so that you can fully understand the potentiometer.
Step 6:Know the self-locking. Press and wait for the light to be on, then press the light to turn off.
Package included
10 x DIY LED Dimming Lights Technology Small Production Kit
Weight | 0.27 kg |
---|
Customers Also Viewed
CP2102 USB To TTL/Serial Module Downloader
$10.11Converter BoardAdd to cartCJMCU CP2102 USB To TTL/Serial Module UART STC Downloader For Driver Installation Introduction:http://forum.hobbyant.com/forum-topic-56275.html Description CJMCU-CP2102 its highly integrated, built-in USB2.0 full-speed function controller, USB transceiver, crystal oscillator, EEPROM and asynchronous serial data bus (UART), supports full-featured modem signal without any external USB devices. CJMCU-CP2102 works with other USB-UART adapter circuit similar to the driver through …
24x12x1 inch Aluminum Silicate High Temperature insulation Ceramic Fiber Blankets
$56.69FabricsFibers & TextilesAdd to cartDescription24x12x1 Inch Aluminum Silicate High Temperature Insulation Ceramic Fiber BlanketSpecificationMaterial:Aluminum SilicateSize:61x30x2.5cm / 24 x12 x1 inchClassification temperature:1260 ℃Long-term temperature:1100 ° CThermal conductivity:0.03Applications* Furnace, heating equipment, pipelines and other lining or wall lining insulation* Furnace door, lid, roof and other heat sealing* Chemical, electrical, high-rise building insulation fireFeatures* Seismic heat resistance* Low thermal conductivity and low …
24x12x1 inch Aluminum Silicate High Temperature insulation Ceramic Fiber BlanketsRead More
10pcs EQKIT AMP-1 TDA2822M Power Amplifier Amplify Module DIY Kit Electronic Production for Diy Kit Electronic PCB Board Module
$82.12DIY Electronic KitsAdd to cartDescriptionPackage Name:TDA2822M AmplifierKit Model:AMP-1Working voltage:DC4.5-9VPCB size:51*36mmSpeaker Size:50mmSpeaker Power:0.25WAMP-1 amplifier using TDA2822M acts as amplifier chip, this chip is STMicroelectronics (ST) developed dual-channel monolithic power amplifier IC, usually in the pocket cassette player (WALKMAN), tape recorders and multimedia speaker in for the audio amplifier. Has a simple circuit, good sound quality, wide voltage range and other …
5Pcs PS2 Game Joystick Switch Sensor Module
$10.92Sensor & Detector ModuleAdd to cart5Pcs PS2 Game Joystick Module For Description This is PS2 game joystick module for Lots of robot projects need joystick. This module provides a affordable solution to that. Simply connect to two analog inputs, the robot is at your commands with X,Y control. It also has a switch that is connected to a digital pin. …
100W Outdoor Sunpower Foldable Solar Panels Cells Waterproof Fast Charger Solar Panel
$97.19Solar PanelAdd to cartFeatures1. High efficiency, fast charging.2. Small size, super thin, waterproof, easy to operate, wide range of application3. Easy to carry, with a handle.4. It is more than 5% higher than ordinary efficiency.5. Solar energy conversion efficiency:25%Specifications–Output voltage:USB5V + DC18V–Output current:20A, 5.5A–Color:Black–Solar panel type:Monocrystalline silicon–Conversion efficiency:>25%–Output interface:USB–Open Size:680mmx305mm/26.7inx12in–Folding size:170mmx305mm/6.7inx12inPackage Included–1X Soalr Panel–2X Carabiner–1X USB cable
Reviews
There are no reviews yet.