10pcs Electronic DIY LED Dimming Lights Series and Parallel Circuit Technology Small Production Kit
$29.32
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The purpose of the experiment
1. Understand and recognize the light-emitting diodes and illuminate the light-emitting diodes (LEDs);
2. Understand the role of understanding resistance, series and parallel resistance;
3. Understand the self-locking switch;
4. Understand and recognize adjustable resistors and use adjustable resistors;
Experimental steps
Step 1:The long leg of the light-emitting diode (LED) is the positive pole, and the short leg is the negative pole. First, the long wire of the LED is connected to the black wire (negative electrode) of the battery case, and the short leg of the LED is connected to the red wire (positive electrode) of the battery case. At this time, the light emitting diode (LED) is not lit. Then send it over again, let the long leg of the LED connect to the red line of the battery box, and the short leg of the LED is connected to the black line of the battery box. At this time, the LED lights up, indicating that the LED is in one-way operation and the single-pass characteristic of the diode .
Step 2:In the circuit of the experimental step 1, a resistor of 220 ohms is inserted in series, and the brightness of the LED lamp is lowered, and the resistance hinders the current.
Step 3:Connect a 220 ohm resistor in parallel with the resistance in the circuit of the experimental board 2. The brightness of the LED is increased, indicating that the total resistance of the resistor in the circuit is reduced after the resistors are connected in parallel.
Step 4:Change the two resistors of the experimental step 3 from parallel to series. After the series connection, the brightness of the LED lamp is the lowest. After the series connection of the resistors, the total resistance of the resistor in the circuit increases.
Step 5:Replace the original resistor with a potentiometer. The potentiometer has 3 feet, and the resistance of pins 1 and 3 is fixed. The resistance of pins 1 and 2, 2 feet and 3 feet can be changed by adjusting the potentiometer knob. When experimenting, you can pick up 2 of them. The foot has to experiment many times, adjust the potentiometer knob to observe the change of LED brightness, so that you can fully understand the potentiometer.
Step 6:Know the self-locking. Press and wait for the light to be on, then press the light to turn off.
Package included
10 x DIY LED Dimming Lights Technology Small Production Kit
Weight | 0.27 kg |
---|
Customers Also Viewed
30x30cm Stainless Steel 304 Cloth Filtration Woven Wire Screen 100 Mesh
$12.07Mesh & Wire ClothAdd to cartDescriptionStainless Steel 304 Filtration Woven Wire Screen is widely used in In filtering industrial paint, oil,water.SpecificationMesh Count:100Mesh Size Opening:150 MicronsColor:SilverMaterial:304 Stainless steelSize:30cm x 30cm/11.8inch x 11.8inchFeatures Stainless steel 100 mesh filtration 12inch x 12inch woven wire. Non-toxic, odorless harmless. Water resistant, high temperature, weather resistance. Widely used in In filtering industrial paint, oil,water. Type 304 …
30x30cm Stainless Steel 304 Cloth Filtration Woven Wire Screen 100 MeshRead More
Iron Black Vintage Steampunk 1/2 inch Stop Valve Light Switch with Wire Pass Thru
$34.41SwitchesAdd to cartVintage Steampunk 1/2inch Stop Valve Light Switch With Wire Pass ThruSpecificationMaterial:IronColor:Iron BlackSize(L*H):45 x 80 mmType:1/2inchFeaturesIncrease the retro charm.Easy to install, easy to clean.It works well with your table lamp.Simple and practical, increase home taste.The switch can handle 3 A at 120V or 5A at 12V.For plumbing lights or other lighting suitable for this type of …
Iron Black Vintage Steampunk 1/2 inch Stop Valve Light Switch with Wire Pass ThruRead More
5pcs ISD1820 3-5V Recording Voice Module Recording And Playback Module Control Loop Play / Jog Play / Single
$23.15Other Module BoardAdd to cartDescriptions Main chip:ISD1820 Size:38.5 x 42.8mm Operating voltage:DC 3~5V Features Easy to use 10 second voice recording and playback. High quality, natural voice restore. Can be used as a megaphone module. With loop play, jog play, single play function. control. This module can directly drive 8 ohm 0.5W small speakers. Power supply:3-5V, can be connected …
40 Pin 2.54mm Male Female SIL Socket Row Strip PCB Connector
$4.58Electronic Accessories & SuppliesAdd to cartDescriptionPitch:2.54mm Gender of Connector:Male & FemaleNumber of Pins:40 PinType of Row:Single-RowType of connector:StraightColor:BlackPackage include1 x 40Pin Single Row Straight Male1 x 40Pin Single Row Straight Female
3pcs Assembled Music Tesla Coil Mini Plasma Horn Speaker 15W 2A DC 15-24V Module
$39.72Other Module BoardAdd to cartDescriptionPower:15 WBoard size:4.0×8.0 mmPower input:DC 15-24V, current 2A, DC5.5 interface/row pinAudio input:3.5 sockets, can be connected to a mobile phone, mp3, computer audioPackage includes3 x Tesla CoilNotesTesla functional parameters:Voltage input 15-24V DC, current 2A, work when the heat is relatively large, so the heat sink is relatively hot! When using, be careful not to touch …
3pcs Assembled Music Tesla Coil Mini Plasma Horn Speaker 15W 2A DC 15-24V ModuleRead More
Reviews
There are no reviews yet.