HackRF one SDR + Aluminum Alloy Case Software Defined Radio 1MHz-6GHz Assembled
$248.98
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
-The official firmware created for the PortaPack has several decoders and transmitters built into it, but the third party firmware is really what you’ll want to use with it since it contains many more decoders and transmit options.
-You can fully unleash the power of the Portapack as this comes with Firmware Installed!
Progress of Work
1. We have completed the program validation prototype.
2. The latest 2017.5 month documents are based on improvements.
Collect and Replay
One of the best things about the PortaPack is that it makes acquisition and replay of wireless signals like those from ISM band remote controls extremely easy. To create an acquisition you just need to enter the ‘Acquistion’ menu, set the frequency of the remote key, press the red ‘R’ Record button and then press the key on the remote. Then stop the recording to save it to the SD Card.
Now you can go into the Replay menu, select the file that you just recorded and hit play. The exact same signal will be transmitted over the air, effectively replacing your remote key.
Microphone TX
Using the 3.5mm audio jack the Portapack can also be used as a standard Push to Talk or voice activated walkie talkie radio. With a microphone plugged into the audio jack simply hold down the right button to push to talk. If required you can also enable multiple CTCSS tone options, as well as tones that look like they enable transmission to wireless headphones
Other Transmitters
There are generic OOK transmitter which can be programmed with custom data. This mode might be useful for experimenting with simple keyfobs, or things like home automatation switches.There are numerous transmit modes implemented that are questionable in most countries and could get you into huge trouble. These transmitters are purely to be used for internal testing with a faraday cage!
Receivers
By connecting speakers to the Portapack’s 3.5mm audio jack you can easily listen in on standard NFM and WFM audio signals. ADS-B reception can be easily enabled on the PortaPack by selecting the inductor and lightning symbol on the top right. With the bias tee enabled you can receive aircraft.
Hardware Configuration
1. TFT240*320 screen (model:ER-TFT024-3)
2. navigation switch (TSWB3NCB222)
3. audio output
4. microphone input
5. DC2.1 interface
6. 4 layer gold plate
7. ROSH process (exported to Europe and America)
The latest version is updated with the latest documents in 2017.5 month
Add a PortaPack to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack attaches to your HackRF and adds a touchscreen LCD, navigation controls, headphone jack, real-time clock, micro SD card slot,
Just add a USB battery, and you’re ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware).
HAV0C Features
– IQ file replay
– Microphone FM transmit with CTCSS
– CTCSS decoder
– Frequency manager (save & load from SD card, with categories and notes)
– File manager
– ‘Soundboard’ wave file player (put 8-bit mono files in SD card /wav directory)
– ADS-B receiver with map view
– SSTV transmitter
– Fully configurable transmit signals
– POCSAG transmitter
– POCSAG receiver/decoder
– Morse transmitter (FM tone and CW)
– OOK transmitter for common remote encoders (PT2262, doorbells, remote outlets, some garage doors, …)
– RDS (Radio Data System) PSN, RadioText and Time groups transmitter
– Meteorological radiosonde receiver for M10 and M2K2…
– AFSK receiver
– AFSK transmitter (Bell202…)
– Nuoptix DTMF sync transmitter
– TouchTunes jukebox universal remote
– LCR (Language de Commande Routier) message generator
– Street lighting control transmitter (CCIR tones)
– ‘Play Dead’ under emergency
– Fully configurable RF signal generator
– RSSI audio output as pitch (for direction finding)
Specifications
– 2.4 inch, 240 x 320 RGB LCD with resistive touch panel.
– Four-way arrow keys, rotary jog wheel, and select button.
– Preserving settings and date/time.
– Micro SD card slot for data and code storage
Some features demonstrated in 2016 February 22 firmware video
– SSB, AM, narrowband FM, wideband FM audio reception, with spectrum waterfall.
– Wideband (18MHz) spectrum analysis and waterfall.
– Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT).
– HackRF mode runs HackRF firmware for use with host computer SDR software.
– PPM calibration for more accurate tuning.
– Sleep mode saves power by turning off just the display.
You may also find the Furrtek firmware very interesting!
Your HackRF will continue to function with computer-based SDR software, when you put the PortaPack into ‘HackRF Mode’.
PortaPack is compatible only with the HackRF One. It is not compatible with the earlier HackRF design. If you have an RF shield installed on your HackRF, the PortaPack should fit just fine. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results with minor mechanical interference between the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should have no mechanical problems.
PortaPack requires an external battery. Any USB-connected battery should work, though they vary widely in quality and poorly-designed batteries may inject voltage regulator noise into the radio.
The PortaPack and HackRF One will not replace your handheld ham radio receiver. Receive sensitivity varies from band to band, but will not perform as well as a true ham radio receive
Package includes
1 x SRD Radio (HackRF only)
1 x Shell
Weight | 0.215 kg |
---|
Customers Also Viewed
29Pcs/Set 24/29 Laboratory Glassware Kit 25/50/100/250/500mL Flask Lab Chemistry Glass Ground Joint Distillation Separation
$261.21Lab ChemicalsAdd to cartDescription1. Be made of G3.3 borosilicate glass.This borosilicate glass with low linear coefficient of expansion is ideal choice for fabricating laboratory glassware.Annealing Point:560℃Linear Coefficient of Expansion:32*10-7/℃Softening Point:820℃2. The thickness of the flask wall is 2.5mm.3. All of the joint is 24/29,This kit has 18 kinds of parts as belowNo.:Specification:Part name:Quantity1:24/29:Claisen adapter:12:24/29:75°Distillation adapter:13:24/29:Vacuum take-off adapter:14:24/29:Inlet/Thermometer adapter:15:24/29 …
Mini DC Vibration Motor Module 8800 RPM High Frequency Vibration Single-direction Rotation
$10.11Other Module BoardAdd to cartDescription Vibrator Motor is consist of an N20 Motor and a metal eccentric wheel. This N20 motor is has a 5V supply voltage. The output shaft has a rotational speed of 8800 RPM. Specifications can be seen below. With this product, you can implement a vibration function to your application. These days miniature vibrating motors …
Mini DC Vibration Motor Module 8800 RPM High Frequency Vibration Single-direction RotationRead More
D1 R2 V2.1.0 WiFi Uno Module Based ESP8266 Module Geekcreit for Arduino – products that work with official Arduino boards
$13.11Motherboard & Development BoardAdd to cartGithub:Click here to openMore information:Click here to openDescriptionBased on the ESP-8266EX.Compatible, you can use it on IDE.NodeMcu Compatible11 Digital I/O pins1 Analog Input pinOTA — Wireless Upload(Program)On board switching power supply — Max 24V input, 5V 1A outputWhat’s new about V2.1.0Use BRT (Bias Resistor Transistor), easier into flash mode.Optimize the circuit, the system is more …
1.54 inch Electronic Flexible ink Screen Display Module Black and White Dual Color e-Parper OLED
$39.35Display ScreenAdd to cartFeatureWorking voltage:DC 5VWorking current:150mAMaximum power:0.75WDisplay color:black and whiteDisplay size:1.54 inch/2.13 inchDisplay resolution:200*200/250*122Interface type:8pin header with 2.54mm pitchOperating temperature range:-20C to +60CPositioning hole size:diameter 3mmHeight:7mmPackage includes1 x Display board
AD/DA Extension Board PCF8591 GPIO 3.3V 5V for Raspberry Pi 4B/3B+/3B
$34.43Raspberry Pi & Orange PiAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.SpecificationsSize:65*56*24mm Weight:27gPins:Raspberry Pi GPIOOutput Voltage:3.3V/5V (IO VCC:3.3V)Analog Port-Input:4 Analog inputs are converted to Digital AD input-Output:Digital input simulated to Analog DA outputDigital Port:27 Digital IOI2C:3 Way I2C(BCM2,3)Serial Port:1 Way Serial Port(BCM14,15)SPI:1 Way …
AD/DA Extension Board PCF8591 GPIO 3.3V 5V for Raspberry Pi 4B/3B+/3BRead More
Wooden Christmas Advent Calendar Christmas Elk Decoration Fits 25 Circular Chocolates Candy Stand Rack
$21.57ChemistryAdd to cartSpecificationName:Wooden Christmas CalendarSize:Approximately 40x35cm (15.7X13.8in)Material:WoodenFeatureIt is sent flat packed, simply slot the stand together and place the tree into the stand and fill with your chocolates.Package Included1 x Christmas Calendar (The Chocolate is NOT included)
3PCS USB Microphone for Raspberry Pi
$27.14Raspberry Pi & Orange PiAdd to cartFeature1. Sensitivity:-47dB ÷ 4dB2. Sensitivity reduce:-3dB at 1.5V3. Working Voltage:4.5V4. Frequency response:100 ~ 16kHz5. SNR:More than -67dB6. Cable length:0.7-0.9MThe effective distance of 2 meters or morePackage included3xUSB Microphone For Raspberry Pi
Reviews
There are no reviews yet.