8 Bi-direction IO I2C Expansion Board with Isolation Protection for Raspberry Pi
$15.30
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The module use the Raspberry Pi Model B through the I2C bus to expand 8 bi-direction IO.
You can operate Pin A0,A1,A2 through the mini jumper to choose the I2C address. You can choose maximum 8 different address from 0x20-0x27.The module lead to the Raspberry Pi’s GPIO again so you can cascade maximum 8 modules one by one
Features
Input voltage:5V or 3V
8 bi-direction IO
Provide Isolation protection
Communicate with I2C bus
Expand 8 modules maximum
8 different I2C address that you can choose
Reverse insert will not disturb the module
IO definition
The EXT0-EXT7 are 8 bi-direction GPIO that you can use. There are 6 Pins near the letter inch ADDRinch. They are Pin A0,A1,A2.You can choose different I2C address through the setup the mini jumper.
Package Included
1x I2C expansion board
Weight | 0.011 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.