3Pcs F5305S Mosfet Module PWM input Steady 4 Channels 4 Route Pulse Trigger Switch DC Controller E-switch MOS FET Field Effect Switch
$48.10
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The module is based on FET model F5305S. We can input PWM signal to control motor speed, lightness of bulb, etc.
Features
FET module, input and output totally isolated from each other.
Signal trigger:digital high/low signal, can be connected to IO of micro-controller, PLC interface, DC power supply, etc.
The output can control high-power devices:motor, light bulb, LED light & strips, DC motor, small pumps, solenoid valve.
Input signal voltage:3V~20V; Input current:about 5mA.
Output voltage:5V~36V(Current:within 5A, Max. current is 20A. When current is over 5A, please add heat sink).
Specifications
Input Signal:Voltage:3V~20V; Current:5mA
Output:Voltage:5V~36V; Current:within 5A
Item Size:78 * 65 * 15mm / 3.07 * 2.56 * 0.6in
Item Weight:52g / 1.86oz
Package Weight:54g / 1.93oz
Package includes
3 x F5305S Mosfet Module
Weight | 0.168 kg |
---|
Customers Also Viewed
DIY LED Light Set Kit for Lego 10248 for F40 Car Building Blocks Lighting Parts
$29.15DIY Electronic KitsAdd to cartSpecificationsMaterial:PlasticFit:for Lego 10248 F40Interface:USBNote:Please allow a little color variation for different display setting. The pictures are only for reference, please make the object as the standard. Thank you for your understanding!Package included1 x LED Light Kit (car model Not included)
Keyes Brick Passive Buzzer Module (pad hole) with Pin Header Square Wave Frequency 2KHz
$3.89Sensor & Detector ModuleAdd to cartDescriptionThis is a commonly used passive buzzer module, it mainly uses 12*8.5MM 5V 2K without source buzzer component. There is no oscillating circuit inside the passive buzzer component. When controlling, the GND VCC on the block is powered, the signal terminal S inputs square waves of different frequencies (voltage 5V), and controls the buzzer sounds …
Keyes Brick Passive Buzzer Module (pad hole) with Pin Header Square Wave Frequency 2KHzRead More
3pcs AC110V/220V to DC5V 40A 200W with Fan Switching Power Supply 200*110*50mm
$131.26Power Supply ModuleAdd to cartTechnical ParametersProject:Technical indicators:RemarksBasic requirements:5V 40A 200W:Common (With fan)Dimensions:200*110*50mmOperating temperature:-10°C to +50°C, 20% to 95% RH (no condensation)Storage temperature:-20°C to +85°C, 20% to 95% RH (no condensation)Temperature Coefficient:0.02~0.05%/°CHeat dissipation method:Fan assisted coolingRated voltage range:220VAC:ACInput voltage range:110/240V:ACInput frequency range:50~60Hz:Except DC inputInput undervoltage protection:115 to 150% intermittent modeInput undervoltage recovery:Automatic recoveryInput overvoltage protection:115 to 150% intermittent modeInput overvoltage …
3pcs AC110V/220V to DC5V 40A 200W with Fan Switching Power Supply 200*110*50mmRead More
10Pcs Rocker Switch with Red LED Light on/off Round Boat Rocker Switch 20A/12V DC
$12.14SwitchesAdd to cartSpecificationVolt:DC 12V,20AType:3 Pins with LEDSPST:ON-OFFLight color:RedFeatures1. Our switch comes with a kyhole slot to prevent unwanted rotation.2. SPST 2 pole design (On/Off) 3rd poles with LED to be connected to earth.3. Functions:It can be applied as the switches for the additional electronical equipment inside&outside the car.(such as flashing lights, chassis lights, and dome lights).4. Application:Car, …
10Pcs Rocker Switch with Red LED Light on/off Round Boat Rocker Switch 20A/12V DCRead More
600pcs Light Dependent Resistor LDR 5MM Photoresistor Photoelectric Switch Element Photo Detector 5516
$35.48Module ComponentsAdd to cartSpecificationsModel:5549Voltage(VDC):150Power Consumption(mw):100Ambient Temperature(C):-30~+70Spectral Peak(nm):540Bright Resistance(10Lux)K┯:5-10Response Time(MS):Rise:20 Decline:30Package included600 x Resistor
5pcs TTP224 4CH Channel Capacitive Touch Switch Digital Touch Sensor Module
$9.26Sensor & Detector ModuleAdd to cart>>>Manual:Click here to openFeatureOnboard TTP224 capacitive 4-button touch sensing ICOnboard 4-channel level status indicatorWorking voltage:2.4V-5.5VModule can set output mode, key output mode, maximum output time and fast / low power selectionPCB board size:35 (mm) x 29 (mm)Package includes5 x Touch sensor module
Reviews
There are no reviews yet.