BESTEP 1 Channel 5V Relay Module 30A with Optocoupler Isolation Support High And Low Level Trigger
$8.73
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The module adopts high quality 30A relay, and the maximum load is normally open interface:AC 250V/30A, DC 30V/30A;
The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA;
Module working voltage:5V
Can be set up by high jumper or low level trigger.
Fault-tolerant design, the relay will not operate even if the control line is disconnected.
Power indicator (green), relay status indicator (red)
The interface design is humanized, all interfaces can be directly connected through the terminals, so it is very convenient.
Module size:50mm x 33mm x 24mm (length * width * height)
Product net weight:36g
There are 4 fixed bolt holes, holes 3.1mm, spacing 44.5mm x 27.5mm
Relay version:5V
Quiescent current:5mA
Maximum current:190mA
Trigger current:2-4mA
Module interface description
1. DC+:module DC power supply positive pole (trigger terminal voltage positive).
2. DC-:module DC supply negative pole (trigger terminal voltage negative).
3. IN:signal trigger terminal (default trigger voltage is the same as power supply).
4. JD+:relay control terminal voltage positive pole
5. JD-:relay control terminal voltage negative pole
6. DC +/- and JD +/- uses jumper cap short connection, trigger terminal and relay control terminal voltage is the same.
7. Selection of high and low level trigger mode, when jumper is connected to L-terminal, IN-terminal is low level trigger, and H-terminal is high level trigger.
8. Normally closed terminal (NC):relay normally closed.
9. Public terminal (COM):common terminal of relay
10. Normally open terminal (NO):relay normally open.
Package Included
1 x 1 Channel 5V Relay Module
Weight | 0.036 kg |
---|
Customers Also Viewed
20Pcs Serial Port WIFI ESP8266 Module Adapter Plate with IO Lead Out for ESP-07 ESP-08 ESP-12
$12.02Smart ModuleAdd to cart20Pcs Serial Port WIFI ESP8266 Module Adapter Plate With IO Lead Out For ESP-07 ESP-08 ESP-12This Adapter Plate is for ESP-07 ESP-08 ESP-12, a test board with IO lead out.NoteNeed to solder 3V regulator by youself.ESP-07, ESP-08, ESP-12 module board are not included!!!Package included20 x Serial Port WIFI ESP8266 Module Adapter Plate40 x Pins
20pcs 5V Low Level Trigger one 1 Channel Relay Module interface Board Shield DC AC 220V
$35.99Relay ModuleAdd to cartFeaturesWith isolation groove in control area and load area.With power and relay action indication, bright when connect and go off when disconnects.When there is a signal in signal input, public side and common side will breakover.It can be not only used as a microcontroller development board module, but also as a home appliance control.It can …
20pcs 5V Low Level Trigger one 1 Channel Relay Module interface Board Shield DC AC 220VRead More
10pcs DC 3V Watering Small Water Pump Silent Mini Water Pump
$26.77Other Module BoardAdd to cartFeatureAmbient temperature:-20 ° C ~ 60 ° CUse ambient humidityUse medium:water, non-flammable fluid liquidUse scene:medical, fountain, etc.Life:>=200H (continuous work)Motor model:140 type 5500RPM/MINModel:Voltage Scope (DC):Current (A):Power (W):Max. Water Head (M):Max. Flow Rate (L/H):Starting Voltage:Waterproof GradeJT-DC3W-3:3V:0.12:0.36:0.35:80:1:IP68Package includes10 x Water Pump
3Pcs I2C WiiChuck Nunchuck Small Adapter Shield Module Board
$6.63Sensor & Detector ModuleAdd to cartSpecificationWiichuck is a board for Wii-Nunchuck.Use this shield to achieve communication between nunchuck with for without broking the controller for Wii Nunchuck.It is grate for DIY projects.Dimensions:1.02 in x 0.47 in x 0.28 in (2.6 cm x 1.2 cm x 0.7 cm)Package includes3 x Adapter Module
5Pcs YS-U12S5H AC to DC 5V 2A Switching Power Supply Module AC to DC Converter 10W Regulated Power Supply
$37.17Power Supply ModuleAdd to cart>>>Manual:Click here to openFeatures-Universal voltage input:AC100-265V AC-With overload, short circuit, over temperature protection function-Full load aging test-Ultra low output rippleSpecificationsModel:YS-U12S5HOutput characteristics:Output voltage:5VRated current:2000mACurrent range:0-2000mARippleOutput accuracy:÷1%Voltage regulation rate:÷1%Load regulation rate:÷1%Rated power:10WAdjustable output range:/Setup, rise, hold time:300ms、20ms、20ms/220VACInput characteristics:Input voltage range:AC100-264VInput currentFrequency range:47Hz-63HzEffectiveness:>83.5%Start impact circuit:COLD STARTLeakage currentProtection characteristics:Over power protection:150-170% rated power, automatic recovery after fault removalOver voltage …
CBB60 5Pcs 50UF 450V Water Pump Motor Run Capacitor
$64.03Module ComponentsAdd to cartFeaturesCBB60 Capacitors takes heavy-edge metallized Al/Zn PP film or web-like fuse film as dielectric. Its components are sealed with flame-retardant epoxy resin. It has cylindric outline with high reliability and stability.CBB60 capacitor has features of small size, light weight, small tangent in waste angle, and good self-concrescence. Applicable to startand operation with 50/60Hz. A. C …
CBB60 5Pcs 50UF 450V Water Pump Motor Run CapacitorRead More
20pcs ZFX-W1302 Digital thermostat Controller Temperature Controlling Temperature Meter for Automatic incubator
$172.94Test & Measuring ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.SpecificationsModel:ZFX-W1302Material:PVCPower Supply:DC 9-24VTemperature Measurement:-50 C – 120 CTemperature Control:0 C – 110 CTemperature Control:0.1 CDisplay Color:RedSensor:NTC B3435 10KSensor Cable Length:1MSize:99 * 43 * 22.6mmSetting Steps1. Short press the ‘Set’ key, the screen …
Reviews
There are no reviews yet.