Micro ATmega32U4 5V 16MHz Development Board
$26.23
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The Micro ATmega32U4-MU is a tiny microcontroller board based on the ATmega32U4. It has 20 digital input/output pins (7 of which can be used as PWM outputs and 12 as analog inputs), a crystal oscillator, a micro-USB connection, an ICSP header and a reset button. With a 16 MHz frequency and 5V operating voltage, this board is similar to the Arduino Leonardo, although the Micro ATmega32U4-MU is more compact (17.78*48.26mm).
The board contains everything needed to support the microcontroller; you just have to connect it to a computer and get started! Its form factor enables it to be easily placed on the circuit board.
Like the Arduino Leonardo, the Micro ATmega32U4-MU has built-in USB connection, eliminating the need for a converter. This allows the Micro to appear to a connected computer as an HID-device, such as a keyboard or mouse, in addition to a COM-port. The board is also able to perform other Arduino Leonardo functions.
Power
The Micro ATmega32U4-MU can be powered via a USB connection.
Power Supply
5V:The regulated power supply used to power the microcontroller and other components on the board. This can come either from VIN via a voltage regulator, or be supplied via USB, or another regulated 5V supply.
3V3:A 3.3V supply generated by the on-board regulator. Maximum current draw is 50mA.
GND:Ground pins.
I/O Pins
Each of the 20 digital pins can be used as an input or output. They operate at 5V. Each pin can provide or receive a maximum of 40 mA, and has an internal pull-up resistor (disconnected by default) of 20-50 k Ohms. In addition, some pins have additional functions
— Serial interface:0(RX) and 1(TX) pins. Used to receive (RX) and transmit (TX) data using the ATmega32U4 hardware serial capability. Note that on the Micro ATmega32U4-MU, the Serial class refers to USB (CDC)-communication, for data transfer on pins 0 and 1, use the Serial1 class.
— TWI:2 (SDA) and 3 (SCL) pins. Support TWI (12C) communication using the Wire library.
— External interrupts:3 (interrupt 0), 2 (interrupt 1), 0 (interrupt 2), 1 (interrupt 3) and 7 (interrupt 4). These pins can be configured to trigger an interrupt on a low value, a rising or falling edge, or a change in value. See the attachInterrupt() function for details.
— PWM:3, 5, 6, 9, 10, 11 and 13. Provide 8 bit PWM output with the analogWrite() function.
— SPI:on the ICSP header. These pins support SPI communication using the SPI library. Note that the SPI pins are not connected to any of the I/O pins as they are on the Arduino Uno. They are only available on the ICSP connector.
— Analog inputs:A0 — A5, A6 — A11 (on digital pins 4, 6, 8, 9, 10 and 12). The Micro ATmega32U4-MU has 12 analog inputs (A0 — A11), all of which can also be used as digital i/o. Analog inputs A0 — A5 appear in the same locations as on the Arduino Uno; inputs A6 — A11 are on digital i/o pins 4, 6, 8, 9, 10 and 12, respectively. Each analog input provide 10 bits of resolution (1024 different values). By default, the analog inputs measure from 0 to 5 volts, though it is possible to change the upper end of their range using the AREF pin and the analog Reference() function.
— Reset. A low signal level resets the microcontroller.
LEDs
* RX and TX — flash when data is being transmitted via USB connection.
* ON — power indicator.
* L — LED connection to digital pin 13.
Memory
The ATmega 32U4 microcontroller has 32 KB memory (with 4 KB used by the bootloader). It also has 2.5 KB SRAM and 1 KB EEPROM (which can be read and written with the EEPROM library).
The Micro ATmega32U4-MU has a number of facilities for communicating with a computer, another Arduino device or microcontrollers.
The ATmega32U4 provides serial UART TTL serial communication, which is available on digital pins 0(RX) and 1(TX).
Having hardware support for USB, the ATmega32U4 also allows for serial communication with the computer over a virtual COM port.
The Micro ATmega32U4-MU also acts as a USB 2.0 device, using standard USB COM drivers. The Arduino software includes a serial monitor that allows simple textual data to be sent to and from the board. Which we will do in the example given under the description.
A SoftwareSerial library allows for serial communication on any of the ATmega32U4-MU’s digital pins.
The ATmega32U4 also supports I2C (TWI) and SPI communication. The Arduino software includes a Wire library to simplify use of the 12C bus. The SPI library can be used for SPI communication.
Programming
The board can be programmed with Arduino software, by selecting ATmega32U4 in the Board menu.
The ATmega32U4 microcontroller on the Micro ATmega32U4-MU comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer.
You can also bypass the bootloader and program the microcontroller through the ICSP (In-Circuit Serial Programming) header.
Automatic Reset
Rather than requiring a physical press of the reset button before an upload, the Micro ATmega32U4-MU is designed in a way that allows it to be reset by Arduino software running on a connected computer. The reset is triggered when the virtual CDC COM port is opened at 1200 baud and then closed. When this happens, the processor will reset, breaking the USB connection to the computer. After the processor resets, the bootloader starts, remaining active for about 8 seconds. The bootloader can also be initiated by pressing the Reset button. Note that when the board first powers up, it will jump straight to the user sketch, if present, rather than initiating the bootloader.
USB Overcurrent Protection
The Micro ATmega32U4-MU has a resettable polyfuse that protects the computer’s USB ports from shorts and overcurrent. Although most computers have their own internal protection, the fuse provides an extra layer of protection. If more than 500mA is applied to the USB port, the fuse will automatically break the connection until the short or overload is removed.
Microcontroller:ATmega32U4-MU
Power Out:3.3V-180m
5V-800m
Power IN. USB:5V
Power IN. VIN/DC Jack:5V
Power Consumption:5V 220mA
Logic Level:5V
USB:Micro USB
Clock Frequency:16MHz
Operating Supply Voltage:3.3V
Digital I/O:20(7-PWM)
Analog I/O:12
Data RAM Type/Size:2.5Kb
Data ROM Type/Size:1Kb
Interface Type:ISP
Operating temperature:−40㎡°/+85㎡°
PCB size (L*W):48.26*17.78mm
Weight:8.5g
Documents
Dimensional drawing:Click here to open
Pinout:Click here to open
Schematic:Click here to open
Package includes
1 x Micro ATmega32U4 5V 16MHz Development Board
Weight | 0.015 kg |
---|
Customers Also Viewed
Cross-Section of Geometric Solids Exploring Geometry Manipulatives Mathematics Game Toys
$16.19MathematicsAdd to cartSpecificationMaterial:PlasticColor:Random ColorWeight:90gCube:(L*W*H) approx 4*4*4cm/ 1.57*1.57*1.57 inchCylinder A:(Dia*H) approx 3*3*6cm/ 1.18*1.18*2.36 inchCone:(Dia*H) approx 3*3*5cm/ 1.18*1.18*1.96 inchSphere:(Dia) approx 3cm/ 1.18 inchFeatures1.Shapes including cubes, cylinders, pyramid, sphere, cone, and various Cross-sections model.2.Cross-section of Geometric Solids Experiment set, kids math geometry manipulatives.3.Explore shape, size, pattern, volume and measurement with these invaluable hands-on tools.4.Opened and clear plastic geometric solids, easily …
Cross-Section of Geometric Solids Exploring Geometry Manipulatives Mathematics Game ToysRead More
2Pcs 20W 16V 1.25A Monocrystalline Silicon Rear Junction Box Solar Panel + 4 x Spring + Cables
$107.51Smart Robot & Solar PanelAdd to cartFeatures– The two pieces of the product are connected in parallel. Spring connection, support multiple pieces of DIY parallel connection. Mounting holes are provided on each solar panel.– Suitable for 12V batteries. Support 12V output, suitable for 12V battery charging.– High efficiency, conversion rate of 19-20%– Flexible, suitable for surface mountingSpecificationsType:Flexible solar panelMaterial:Monocrystalline siliconExpand:420*385*2.5mmFolding:420x190x2.5mmWorking temperature:-40° …
3pcs D1 Mini Lite V1.0.0 WIFI internet of Things Development Board Based ESP8285 1MB FLASH
$23.13Smart ModuleAdd to cartFeatures11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0)1 analog input(3.2V max input)a Micro USB connectionCompatible with 1MB Flash500mA resettable fusePackage included3 x WEMOS D1 mini Lite3 x 2pcs Normal pin
3pcs 315MHZ Wireless Transmitter Receiving Module ASK DC 9V-12V EV1527 Remote Control Switch Board
$11.69Smart ModuleAdd to cartTechnical requestProduct model:ZF-2 (with code)Transmission frequency:315MHZWorking voltage:DC 9V ~12VModulation method:ASKQuiescent current:0uAWorking current:8~10mACoding type:learning code (EV1527)Radiated power:10~15mWShooting distance:100-200 meters (receiver sensitivity -108dBm)Volume:26.3mm*23.3mm*9mmPIN:NAME:Function1:ANT:RF signal input pin, this pin needs to be connected to the antenna2:12V-:DC power supply negative input pin3:12V+:DC power supply positive input pinRated parameter:Symbol:ValueDC power supply:VDD-VSS:9V-12VStorage temperature range (TS):TSTG:-12°C to 75°CWelding temperature:+260°CPackage includes3 x Receiving …
5Pcs Geekcreit ESP8266 ESP-01 ESP-01S WS2812 RGB LED Lamp Module Support for IDE Programming
$11.37Expansion Board & ShieldAdd to cartFeatureThis is a WS2812 RGB LED control module based on ESP-01 / 01S. With it, you can easily control the WS2812 light bar / light ring. DIY own lighting control system. Support for Ard uino IDE programming.Characteristic* Master:ESP-01 / ESP-01S (This module does not include ESP-01 / ESP-01S)* Control Pin:GPIO2* Interface:3Pin PH2.0 connector* Operating Voltage:DC …
DD30CRTA 3A 12V 1-1000AH Lead-Acid Battery Accumulator Storage Cell Charger Charging for UPS Car Solar Motorcycles Electric Vehicles
$15.30Power Supply ModuleAdd to cartSpecificationsPower supply voltage:15-28VDC(Recommended 16-25VDC)Over Charge Voltage is 14.8VFloat Charge Voltage is 13.55VMaximum charge current:3AQuiescent current:about 1.8mAHigh PWM Switching Frequency:300KHzOperating Ambient Temperature:-40→ to +85→Size:66 x 20x 12mmWeight:9gApplicationsCar battery chargingSolar battery chargingMobile LoadspeakerLead-Acid Battery ChargerElectric Bicycle ChargerUPS Portable Industrial and Medical EquipmentStandalone Battery ChargersFeaturesFixed Over-Charge VoltageOvercurrent protectionAutomatic Conditioning of Deeply Discharged BatteriesAutomatic RechargeCharger Status IndicationBattery Overvoltage ProtectionSuitable …
Reviews
There are no reviews yet.