Micro ATmega32U4 5V 16MHz Development Board
$26.23
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The Micro ATmega32U4-MU is a tiny microcontroller board based on the ATmega32U4. It has 20 digital input/output pins (7 of which can be used as PWM outputs and 12 as analog inputs), a crystal oscillator, a micro-USB connection, an ICSP header and a reset button. With a 16 MHz frequency and 5V operating voltage, this board is similar to the Arduino Leonardo, although the Micro ATmega32U4-MU is more compact (17.78*48.26mm).
The board contains everything needed to support the microcontroller; you just have to connect it to a computer and get started! Its form factor enables it to be easily placed on the circuit board.
Like the Arduino Leonardo, the Micro ATmega32U4-MU has built-in USB connection, eliminating the need for a converter. This allows the Micro to appear to a connected computer as an HID-device, such as a keyboard or mouse, in addition to a COM-port. The board is also able to perform other Arduino Leonardo functions.
Power
The Micro ATmega32U4-MU can be powered via a USB connection.
Power Supply
5V:The regulated power supply used to power the microcontroller and other components on the board. This can come either from VIN via a voltage regulator, or be supplied via USB, or another regulated 5V supply.
3V3:A 3.3V supply generated by the on-board regulator. Maximum current draw is 50mA.
GND:Ground pins.
I/O Pins
Each of the 20 digital pins can be used as an input or output. They operate at 5V. Each pin can provide or receive a maximum of 40 mA, and has an internal pull-up resistor (disconnected by default) of 20-50 k Ohms. In addition, some pins have additional functions
— Serial interface:0(RX) and 1(TX) pins. Used to receive (RX) and transmit (TX) data using the ATmega32U4 hardware serial capability. Note that on the Micro ATmega32U4-MU, the Serial class refers to USB (CDC)-communication, for data transfer on pins 0 and 1, use the Serial1 class.
— TWI:2 (SDA) and 3 (SCL) pins. Support TWI (12C) communication using the Wire library.
— External interrupts:3 (interrupt 0), 2 (interrupt 1), 0 (interrupt 2), 1 (interrupt 3) and 7 (interrupt 4). These pins can be configured to trigger an interrupt on a low value, a rising or falling edge, or a change in value. See the attachInterrupt() function for details.
— PWM:3, 5, 6, 9, 10, 11 and 13. Provide 8 bit PWM output with the analogWrite() function.
— SPI:on the ICSP header. These pins support SPI communication using the SPI library. Note that the SPI pins are not connected to any of the I/O pins as they are on the Arduino Uno. They are only available on the ICSP connector.
— Analog inputs:A0 — A5, A6 — A11 (on digital pins 4, 6, 8, 9, 10 and 12). The Micro ATmega32U4-MU has 12 analog inputs (A0 — A11), all of which can also be used as digital i/o. Analog inputs A0 — A5 appear in the same locations as on the Arduino Uno; inputs A6 — A11 are on digital i/o pins 4, 6, 8, 9, 10 and 12, respectively. Each analog input provide 10 bits of resolution (1024 different values). By default, the analog inputs measure from 0 to 5 volts, though it is possible to change the upper end of their range using the AREF pin and the analog Reference() function.
— Reset. A low signal level resets the microcontroller.
LEDs
* RX and TX — flash when data is being transmitted via USB connection.
* ON — power indicator.
* L — LED connection to digital pin 13.
Memory
The ATmega 32U4 microcontroller has 32 KB memory (with 4 KB used by the bootloader). It also has 2.5 KB SRAM and 1 KB EEPROM (which can be read and written with the EEPROM library).
The Micro ATmega32U4-MU has a number of facilities for communicating with a computer, another Arduino device or microcontrollers.
The ATmega32U4 provides serial UART TTL serial communication, which is available on digital pins 0(RX) and 1(TX).
Having hardware support for USB, the ATmega32U4 also allows for serial communication with the computer over a virtual COM port.
The Micro ATmega32U4-MU also acts as a USB 2.0 device, using standard USB COM drivers. The Arduino software includes a serial monitor that allows simple textual data to be sent to and from the board. Which we will do in the example given under the description.
A SoftwareSerial library allows for serial communication on any of the ATmega32U4-MU’s digital pins.
The ATmega32U4 also supports I2C (TWI) and SPI communication. The Arduino software includes a Wire library to simplify use of the 12C bus. The SPI library can be used for SPI communication.
Programming
The board can be programmed with Arduino software, by selecting ATmega32U4 in the Board menu.
The ATmega32U4 microcontroller on the Micro ATmega32U4-MU comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer.
You can also bypass the bootloader and program the microcontroller through the ICSP (In-Circuit Serial Programming) header.
Automatic Reset
Rather than requiring a physical press of the reset button before an upload, the Micro ATmega32U4-MU is designed in a way that allows it to be reset by Arduino software running on a connected computer. The reset is triggered when the virtual CDC COM port is opened at 1200 baud and then closed. When this happens, the processor will reset, breaking the USB connection to the computer. After the processor resets, the bootloader starts, remaining active for about 8 seconds. The bootloader can also be initiated by pressing the Reset button. Note that when the board first powers up, it will jump straight to the user sketch, if present, rather than initiating the bootloader.
USB Overcurrent Protection
The Micro ATmega32U4-MU has a resettable polyfuse that protects the computer’s USB ports from shorts and overcurrent. Although most computers have their own internal protection, the fuse provides an extra layer of protection. If more than 500mA is applied to the USB port, the fuse will automatically break the connection until the short or overload is removed.
Microcontroller:ATmega32U4-MU
Power Out:3.3V-180m
5V-800m
Power IN. USB:5V
Power IN. VIN/DC Jack:5V
Power Consumption:5V 220mA
Logic Level:5V
USB:Micro USB
Clock Frequency:16MHz
Operating Supply Voltage:3.3V
Digital I/O:20(7-PWM)
Analog I/O:12
Data RAM Type/Size:2.5Kb
Data ROM Type/Size:1Kb
Interface Type:ISP
Operating temperature:−40㎡°/+85㎡°
PCB size (L*W):48.26*17.78mm
Weight:8.5g
Documents
Dimensional drawing:Click here to open
Pinout:Click here to open
Schematic:Click here to open
Package includes
1 x Micro ATmega32U4 5V 16MHz Development Board
Weight | 0.015 kg |
---|
Customers Also Viewed
High-speed Isolation USB To TTL Serial Module Power Isolation Optocoupler Isolation
$15.30Converter BoardAdd to cartOverviewOptical isolation USB to TTL Serial Module Equipped with CH340T USB to serial chip, achieved the power and TTL signal isolation,High-speed and stability, it could avoid the damage of USB and computer blue screen or other issues while use the USB to TTLserial port module, due to improper operation or other external impact on the …
High-speed Isolation USB To TTL Serial Module Power Isolation Optocoupler IsolationRead More
3pcs 3.5mm Plug Jack Stereo TRRS Headset Audio Socket Breakout Board Extension Module
$4.46Converter BoardAdd to cartFeaturesName:Audio breakout board1. TRRS connectors are the audio-style connectors that you see on some phones, MP3 players and development boards.2. TRRS stands for “Tip, Ring, Ring, Sleeve, Inch which reflects the fact that, unlike a standard stereo connector, this actually has three conductors and a ground.3. Some devices use the extra conductor for a microphone …
3pcs 3.5mm Plug Jack Stereo TRRS Headset Audio Socket Breakout Board Extension ModuleRead More
6.5×55 Laser Bore Sighter Red Dot Sight 6.5mm x 55 Brass Cartridge Boresighter Caliber
$20.24Laser BoresighterAdd to cartCaution:Avoid direct eye exposure to the laser beam. Laser radiation is emitted from the aperture.SpecificationHousing Material:BrassLaser Type:Red LaserLaser Wavelength:635~655mmMax Output PowerPower Supply:3Pcs LR41 Batteries (NOT Included)Battery Installation:Positive side facing outwards. Look at your button cell battery, you will see inch+inch on the flat side commonly, which means positive. And the other slightly rounded side is …
6.5×55 Laser Bore Sighter Red Dot Sight 6.5mm x 55 Brass Cartridge Boresighter CaliberRead More
AD584 Voltage Reference 2.5V/5V/7.5V/10V High Precision Reference Source for Voltmeter Calibration
$32.36RF amplifierAdd to cartSpecificationInput voltage:15VOutput voltage:2.5V/5V/7.5V/10VAccuracy:0.0001Warn floating:15ppm/→Size:5*5cm(not included SMA)Package included1 x AD584 Voltage Reference 2.5V/5V/7.5V/10V High Precision Reference Source
5pcs LilyPad MCP9700 Temperature Sensor Module
$16.04Sensor & Detector ModuleAdd to cartDescriptionDetecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output 0.5V at 0 degrees C, 0.75V at 25 C, and 10mV per degree C. Doing an analog to digital conversion on the signal line will allow you to establish the local ambient temperature. Detect physical …
76M-108M 2-channel FM Transmitter Board Stereo Wireless Audio Transmission Transmitter Module
$33.20Other Module BoardAdd to cartDescriptionTwo-channel stereo FM transmitter moduleWorking voltage:DC 3V-16VWorking current:17mASize:49mm*31mmFunction description2-channel FM stereo transmissionPower-off memory functionworking frequency displayInput volume and transmission frequency are adjustablesupport wide voltage supplyworking current, small emission efficiency, high power supply, durableRestore factory settingsultra low back noiseInstructions for use– Key:short press, frequency reduction, 0.1MHz;+ key:Short press, increase the frequency by 0.1MHz, long press, restore …
80x50x20mm Corrosion Resistant Aluminum Split Body Aluminum Box Enclosure Case for Electronic DIY
$14.16Electronic Accessories & SuppliesAdd to cartFeaturesHeavy gauge extruded aluminum construction | Easier for drilling, soldering, screwing, problem fixing.Excellent electromagnetic shielding performance;Front and back panels and fasteners are included.Heavy gauge extruded aluminum construction.Excellent electromagnetic shielding performance.Built-in grooves for holding circuit board.Corrosion resistant, lightweight.Durable in use.Great for electronic projects, power supply units, student projects and amplifiers, etc.SpecificationMaterial:extruded aluminumColor:blackSize:80x50x20mmPackage Included1 x 80x50x20mm Enclosure …
4000Peak Power inverter DC12V To AC220V Power Converter Car USB Charger inverter Modified Sine Wave
$157.94InvertersAdd to cartPower InverterFeature– The power inverter can convert DC12V to AC220.– Overload, over temperature, short-circuit, low voltage, over voltage protection.– Stable performance and precise output voltage.Built-in cooling fan with low noise.– Comes with a car charger and a pair of crocodile clip, convenient to use.– Perfect for television, DVD player and other household appliances.Specifications– Color:Black– Frequency:50+/-3Hz– …
Reviews
There are no reviews yet.