SSY DIY Creative Clock Kit Night Light Clock Electronic Education Kit Digital Tube Set
$21.86
Color. Green / Color. Blue / Color. Red /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The kit uses 5V power supply
13 kinds of LED switching animation
With seconds reset function
Can set alarm
With temperature display, can set temperature display or not
With light control function, light control switch can be set
Color:Red, Blue, Green(just the digital tube color)
Tutorial
1. Press the setting key for the first time, and the setting minute display will be displayed. At this time, every time you press the No. 2 key, the displayed value will increase by 1 and the value is between 0 and 59. According to the current time, set the corresponding value. Just fine.
2. After setting the minutes, press the set button for the second time to enter the setting. At this time, each time you press the plus button, the displayed time will increase by 1 and the value is between 0 and 23. According to the current time, set The corresponding value is sufficient.
3. After setting the time, press the set button for the third time, and then enter the reset setting of seconds. At this time, the current seconds will be displayed and the seconds will change. At this time, every time you press the plus button, the seconds will be reset to zero. If the user can set the number of seconds according to the actual time, when the seconds of the actual time becomes 00, press the plus key to set the seconds. (When setting the minutes, set the minute to one minute more than the actual number, that is, the actual 50 minutes, set to 51 minutes. This is only when the seconds are reset to zero.
accurate)
4. Press the Set button for the fourth time to enter the alarm minute setting. At this time, every time you press the No. 2 button, the displayed value will increase by 1 and the value is between 0 and 59. According to the current time, set the corresponding value. can.
5. Press the setting key for the fifth time to enter the setting of the alarm clock. At this time, each time you press the plus key, the displayed time or 1 is increased, and the value is between 0 and 23. According to the current time, the corresponding value is set. can.
6. Press the set key for the 6th time, the current digital tube will display inch1-00inch, at this time enter the alarm function on or off setting, press the plus key to turn on or off, 1-00 inchmeans off,inch 1-11 inchMeans on)
7. Press the setting key for the seventh time, the current digital tube will display inch2 00inch, at this time enter the light control function on or off setting, press the plus key to turn on or off (inch2 00inch means off, inch2 inch11inch means open)
8. Press the setting key for the 8th time, the current digital tube will display inch3 00inch, at this time enter the temperature display function on or off setting, press the plus key to turn on or off (inch3 00inch means off, normal display The screen will always display the current time, inch3-11inch means on, and the normal display screen will switch between clock and temperature cycle display)
9. Press the Set key for the ninth time to return to the normal display screen
10. In the normal display screen, every time you press the plus key, the LED animation effect will switch once.
Note
It is DIY Kit, Need to assemble yourself.
R1 and R2 is 0805 10K resistor
R3-R11 are 0805 1K resistor
Package included
1 x DIY Clock Kit
Weight | 0.2 kg |
---|
Customers Also Viewed
5Pcs CP2102 USB To TTL/Serial Module Downloader
$21.98Converter BoardAdd to cart5Pcs CJMCU CP2102 USB To TTL/Serial Module UART STC Downloader For Driver Installation Introduction:http://forum.hobbyant.com/forum-topic-56275.html Description CJMCU-CP2102 its highly integrated, built-in USB2.0 full-speed function controller, USB transceiver, crystal oscillator, EEPROM and asynchronous serial data bus (UART), supports full-featured modem signal without any external USB devices. CJMCU-CP2102 works with other USB-UART adapter circuit similar to the driver …
10pcs 180 Degree USB 3.0 Type A female Socket Connector SMT Charging Socket Plug Connector
$10.11Terminal BlocksAdd to cartSpecificationsColorBlueRated Current1.5ARated Voltage30VInsertion Force35N MaxDurability3000 Cycles Min Rubber CorePBT / Icp Ul94V-0 Resistance To Voltage500V Ac Min. Insulation Resistance≥1000MΩPull-Out Force10N Min.Initial 8-20N AfterWorking Temperature-20 Degrees To 60 Degrees Contact Impedance≤30mΩTerminalsBrass C2680,Nickel Base,Gold-Plated 1 u,Package included-10pcs X 180Degree Connectors
Dual Servos Knob Serial Port Control Board Futaba MG995 SG90 Steering Gear Debugging Module
$13.11Other Module BoardAdd to cartFeature1. The onboard stable 8-bit MCU is used to generate high-resolution PWM signals with precise control.2. Support manual mode and return to medium mode, switch by button, with mode indicator.3. Support knob adjustment or serial command control in manual mode.4. The serial port command control can use the matching host computer software or connect to …
Dual Servos Knob Serial Port Control Board Futaba MG995 SG90 Steering Gear Debugging ModuleRead More
Keyes Brick Laser Head Sensor Module (pad hole) with Pin Header Board Digital Signal
$4.36Sensor & Detector ModuleAdd to cartDescriptionThis sensor is fully compatible with ARDUI NO single-chip microcomputer, and its connection port is also compatible with Arduino sensor expansion board. It is mainly composed of a laser head, which is composed of a light-emitting tube core, a condenser lens, and a copper adjustable sleeve. After connecting to the power supply, we directly input …
Keyes Brick Laser Head Sensor Module (pad hole) with Pin Header Board Digital SignalRead More
5pcs DC3~5V AK-119 433.92MHZ 4 Pin Superheterodyne Receiver Board without Decoding -105dBm
$10.37Other Module BoardAdd to cartFeatures1. The product is small in size, high in sensitivity and strong in anti-interference ability;2. The same definition as the four-pin pin of RXB12, the usage is the same. The unit price is lower than RXB12 and can be directly replaced.Technical ParametersWorking voltage:DC3~5VTransmission rate:4.80KBPSQuiescent current:6mAReceive sensitivity:-105dBmDimensions:30 * 9 * 5mmWorking temperature:-20 ° C ~ +80 …
5pcs DC3~5V AK-119 433.92MHZ 4 Pin Superheterodyne Receiver Board without Decoding -105dBmRead More
150g Capacity Quartz Silica Melting Crucible Pot for Gold Silver Platinum Refine
$16.19Glassware KitAdd to cart150g Capacity Quartz Silica Melting Crucible Pot For Gold Silver Platinum RefineDescriptionMaterial:quartzCapacity:150gDiameter:43X57mm/1.69inch X2.24inch(ID*OD)Height:20mm/0.79inchDeepth:15mm/0.59inchNet Weight:40gFeatureQuartz silica melting crucibleProduced by modern ceramic processing technologyHigh orrosion resistance and strength,the temperature resistance up to 2800℃/5072FPerfect for gold silver casting and refine usagePackage included1X Quartz Silica Melting Crucible
WXD3-13-2W Precision Potentiometer 470R 470 Ohm Wirewound Multi-Turn Potentiometer
$4.50Module ComponentsAdd to cartSpecificationsResistance range:470┯Resistance tolerance:÷ 5%Rotation angle:3600 ÷ 20 Number of laps:10 lapsRated voltage:160VStarting torque:3.5 ~ 100mN.mRated power:2W (85 →) 0W (125 →)Linearity accuracy:÷ 0.3%Mechanical durability:10,000 weeksPackage included1 x Potentiometer
Reviews
There are no reviews yet.