SSY DIY Creative Clock Kit Night Light Clock Electronic Education Kit Digital Tube Set
$21.86
Color. Green / Color. Blue / Color. Red /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The kit uses 5V power supply
13 kinds of LED switching animation
With seconds reset function
Can set alarm
With temperature display, can set temperature display or not
With light control function, light control switch can be set
Color:Red, Blue, Green(just the digital tube color)
Tutorial
1. Press the setting key for the first time, and the setting minute display will be displayed. At this time, every time you press the No. 2 key, the displayed value will increase by 1 and the value is between 0 and 59. According to the current time, set the corresponding value. Just fine.
2. After setting the minutes, press the set button for the second time to enter the setting. At this time, each time you press the plus button, the displayed time will increase by 1 and the value is between 0 and 23. According to the current time, set The corresponding value is sufficient.
3. After setting the time, press the set button for the third time, and then enter the reset setting of seconds. At this time, the current seconds will be displayed and the seconds will change. At this time, every time you press the plus button, the seconds will be reset to zero. If the user can set the number of seconds according to the actual time, when the seconds of the actual time becomes 00, press the plus key to set the seconds. (When setting the minutes, set the minute to one minute more than the actual number, that is, the actual 50 minutes, set to 51 minutes. This is only when the seconds are reset to zero.
accurate)
4. Press the Set button for the fourth time to enter the alarm minute setting. At this time, every time you press the No. 2 button, the displayed value will increase by 1 and the value is between 0 and 59. According to the current time, set the corresponding value. can.
5. Press the setting key for the fifth time to enter the setting of the alarm clock. At this time, each time you press the plus key, the displayed time or 1 is increased, and the value is between 0 and 23. According to the current time, the corresponding value is set. can.
6. Press the set key for the 6th time, the current digital tube will display inch1-00inch, at this time enter the alarm function on or off setting, press the plus key to turn on or off, 1-00 inchmeans off,inch 1-11 inchMeans on)
7. Press the setting key for the seventh time, the current digital tube will display inch2 00inch, at this time enter the light control function on or off setting, press the plus key to turn on or off (inch2 00inch means off, inch2 inch11inch means open)
8. Press the setting key for the 8th time, the current digital tube will display inch3 00inch, at this time enter the temperature display function on or off setting, press the plus key to turn on or off (inch3 00inch means off, normal display The screen will always display the current time, inch3-11inch means on, and the normal display screen will switch between clock and temperature cycle display)
9. Press the Set key for the ninth time to return to the normal display screen
10. In the normal display screen, every time you press the plus key, the LED animation effect will switch once.
Note
It is DIY Kit, Need to assemble yourself.
R1 and R2 is 0805 10K resistor
R3-R11 are 0805 1K resistor
Package included
1 x DIY Clock Kit
Weight | 0.2 kg |
---|
Customers Also Viewed
3pcs L298N Motor Driver Module 4 Chaneel Motor Drive Smart Car Module
$41.54Driver ModuleAdd to cartDescriptionThe four channel L298N motor drive module integrates two L298N chips and can drive four DC motors to realize the control of forward and backward rotation and motor speed. The module is equipped with LM2596S step-down chip. If the motor with 7V voltage or more is driven, 5V power can be output to the control …
3pcs L298N Motor Driver Module 4 Chaneel Motor Drive Smart Car ModuleRead More
Geekcreit D1 Mini ESP32 ESP-32 WiFi+bluetooth internet of Things Development Board Based ESP8266 Module
$21.86Motherboard & Development BoardAdd to cartMore informations:https://github.com/LilyGO/ESP32-MINI-32-V2.0DescriptionThis is D1 Mini ESP32 ESP-32 WiFi+bluetooth Internet Of Things Development Board.Use exampleit can also match the next productPackage included4 x Long female pins4 x short female pins4 x Normal pins1 x mini D1 ESP32
AF1020 Dust-proof Probe Super-stable Pipe-type Current-type Temperature and Humidity Transmitter Temperature Senor Humidity Sensor
$176.16Solar CollectorsAdd to cartSpecificationModel:AF1020 Type Temperature and Humidity TransmitterTemperature measurement range:- 40 ~+80 (℃)Measurement accuracy:+-0.5 (℃)Working Voltage 15-36 (V)Humidity accuracy:+-3% RHHumidity measurement range:0-99.9% RHCurrent output:4-20 m AInstructions1. Power cord positive DC18~36V (red wire)2. Power ground wire GND (black wire)3. Humidity current output 4~20MA (yellow line)4. Temperature current output 4~20MA (white line)Installation sequence1. Connect the red, black, yellow and …
3Pcs 5M Meter thermometer Electronic Digital Display FY10 Embedded thermometer indoor and Outdoor Temperature Measurement
$20.72Test & Measuring ModuleAdd to cartFunction introductionOverall size:48*28*15mmInserted hole size:46*27mmLCD temperature display-50→ to 110→ temperature measurement, 0.1 degree resolution.C and F display versions are availableStandard 0.8m waterproof probeCable length:5 meterPackage includes3 x Thermometer
Peacefair PZEM-028 AC Digital Multifunction Meter Voltmeter Ammeter 0~100A/400V Power Factor Meter
$27.97Electronic Accessories & SuppliesAdd to cartError adjustmentThe product is 100% calibrated before leaving the factory, and the user can also manually adjust the error by himself. The method is as followsStep 1:Long press the button (about 3 seconds) until the digital digit on the screen flashes, then release the button;Step 2:Digital flashing means entering the error adjustment state, the digits …
3pcs 433MHz RF Wireless Receiver Module Transmitter kit + 2PCS RF Spring Antenna OPEN-SMART for Arduino – products that work with official for Arduino boards
$12.11Smart ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionThe kit includes one pair of transmitter and receiver modules and one pair of spring antennas for increasing the communication distance. And the frequency is 433MHz. It is very popular for remote …
10pcs DC 3.7-6V To 400KV Boost Step Up Power Module High Voltage Generator
$55.81Power Supply ModuleAdd to cartFeatureThe high-voltage module uses the principle Tesla coil is made of high-voltage pulse output voltage current, small size, high efficiency, simple external circuit(just plug in the switch, the battery can be) discharge intensity violent.SpecificationModel:MC-105Volume:Length 65mm Diameter 24mm, Diameter of cut surface 22mmVoltage:Input DC3.7-6V, output DC200-400KVCurrent:Input 4A, output 0.5ALength:Input 10 cm or so, the output is …
10pcs DC 3.7-6V To 400KV Boost Step Up Power Module High Voltage GeneratorRead More
Reviews
There are no reviews yet.