DC 12V Motor forward and Reverse Remote Control Switch Projection Screen/Curtain/Rolling Shutter Gate Up and Down Stop Control with Limit
$35.10
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The high-end screen remote control can operate the projection screen up and down on the remote control handle and the connector at the same time, which will not affect the operation control of the projection screen when the remote control handle is lost or damaged, which guarantees the meeting or the normal operation of teaching or theater. At the same time, this screen remote control uses high-quality IC chips to support the control of electric projection screens. It is the best partner for home projection screens.
DC 24V motor forward and reverse controller It is used to control the forward and reverse rotation of 24V motor. The wiring is simple:2 in, 2 out, the incoming line is connected to 24V power supply, and the outgoing line is directly connected to the motor. Complete functions; learning function, through the pairing button, the remote control can be used to obtain the use authority. The remote control that has not been learned is unusable with a limit switch and can be realized to the specified position after a little processing, and the motor stops running.
Features
1. Using wireless digital identification technology, each switch has its own independent password, and will not interfere with each other.
2. Wireless radio frequency remote control, non-directional, the signal can pass through the wall.
3. No wiring is required, which saves wiring costs and saves time and effort.
4. Learning type Multi-function, easy to add remote control, just press the pairing button.
Reference operating instructions
1. Preparation:The controller is powered on (note the positive and negative poles), and the remote control is equipped with batteries.
2. Deleting the remote control:also called clearing data. Press the pairing button without letting go. The indicator light flashes for about 3-5 seconds. Let go, it means the clearing is successful. At this time, the remote control is operated and the controller does not respond.
3. Pairing the remote control:Press the pairing button, the indicator light flashes, let go. When the controller is in the learning state, press the first button of the remote control to transmit the signal.
Remote control parameters
Working voltage:12V (with a 12V23A battery)
Frequency:315MHZ
Reference distance:10-100 meters
Encoding type:fixed code 2260 / learning code 1527
Dimensions:120mm*43mm*18mm
Receiving board parameters
Working voltage:24V
Standby current:6mA
Working frequency:315/433MHz (default 315MHZ)
Frequency deviation:÷0.2MHz
Learning code, through the pairing button to achieve pairing with the remote control
Receiving board size:102mm*61mm*30mm
Package included
1 x Remote control Switch (with Limit)
1 x Receiving board
1 x Base
Weight | 0.362 kg |
---|
Customers Also Viewed
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water Heater
$21.87Laboratory Heating EquipmentsAdd to cartDC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterSpecificationsModel:SSG-2Type:Normally ClosedMaterials:Plastic & CopperDimension:83*90*49cmPipe Inside Diameter:1/2 inchNet Weight:(approx.) 190gFeaturesThis is a DC12V solenoid valve usually used for solar water heater.It can work with water from 1 to 100℃ (or some other liquid).Working Voltage Range:Rated Voltage ±10%Working Water Pressure:0.02 to 0.8MpaThe working water pressure would be too low/high to …
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterRead More
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set Kit
$76.17Terminal BlocksAdd to cartDescription650 Pcs Assorted Ring Insulated Electrical Wire Terminals Crimp Connector Set KitSpecificationQuantity:650PcsMaterial:Copper + PVC+ TinplateInsulated crimp terminals.All are enclosed in plastic case for easy access.The assorted crimp terminals is including50 x Ring M3 Red50 x Ring M4 Red50 x Ring M5 Red50 x Ring M6 Red50 x Ring M8 Red50 x Ring M4 Blue50 x …
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set KitRead More
3.5 inch Protective Enclosure Case Support Dispaly Screen or Cooling Fan for Raspberry Pi
$9.26Raspberry Pi & Orange PiAdd to cartFeatures– Fully updated for Raspberry Pi 3B+/3B/2B– Can support 3.5 inch screen or cooling fan (notes:can not assemble them at the same time)– Heat sink openings for both CPU and LAN chip– High-gloss finish, surface mountableSpecificationsColor:BlackMaterial:ABSSuitable for Raspberry Pi 3B+/3B/2BWeight:45gSize:9cm*6.2cm*3.4cmPackage Included1x ABS Case4x Non-slip mat4x Screws
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module for
$47.25DIY Electronic KitsAdd to cartDescription1. Use TM1650 (compatible with AIP650) digital tube driver chip, support 8-level brightness adjustment, working voltage 3.3V ~ 5.5V2. IIC interface, only need 2 ordinary IO can drive, do not need to repeat scanning of MCU, saving MCU resources.3. 4 digit 0.56 inch red common negative digital tube with decimal point.4. 0.56 inch with four …
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module forRead More
WEAH-81 Car Heavy Bass Frequency Divider High and Low 2-way 2 Bass Crossover Upgrade Tool
$33.09Amplifier BoardAdd to cartFeatureBrand:WEAHModel:81Power:100WApplicable impedance:4-8ohmFrequency response:100Hz ~ 45HzDimensions:133 x 95 x 44mmApplication environment:Car or home speaker DIYPackage includes1 x Bass Frequency DividerHow to Wire:
5pcs 8-36W intelligent Sensor LED Ceiling Light And Sound Control Power Supply Module Bulb Panel Light Built-in Power Driver
$21.42Power Supply ModuleAdd to cartDescriptionInput Voltage:AC185-265VOutput Current:0.22AOutput Voltage:24-108VEfficiency:90%Working Frequency:50/60HZOutput Power:8-24WSound Control:50-75dBLight control:7-20LuxDiameter:25.8mmFeature1. The combination of sound and light control, when the light is strong, does not work, the light intensity is lower than 12-15LUX, and the sound of the induction 27-36DB starts automatically.2. Delay 40-60S automatically extinguished, easy to install, compatible with ordinary switches, no additional wiring.3. Single trigger, …
Reviews
There are no reviews yet.