L293D 4 DC Motor Drive Module Motor Driver intelligent H-bridge for 4WD Car Robot
$13.11
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The drive module can directly drive four DC motor, is 4WD 4 drive car chassis choice.
Drive battery, up to 1A general intelligent car motor current is only four 100-300MA sufficient to meet the control needs.
While leaving two-way stepper motor interface, you can drive four-phase five-wire four-phase stepper motor or two-phase, two-phase four-wire stepper motor, is ideal for precise control needs.
Leaving the corresponding interface can be directly connected to the steering gear, infrared obstacle avoidance and other peripherals. While leaving the charger interface, popup switch, hand into the charger can charge the battery. Very convenient!
This Four DC motorDriver module, usedSTOriginal company newL293DChip, usedSMTProcess stability, the use of high-quality aluminum electrolytic capacitors, the circuit stability.
Can be directly driven 43-16VDC motor and provided5VOutput interface (input minimum as long as6V), You can give5VSingle-chip microcomputer system power supply (low ripple factor), & Lt;stand by3.3V MCU ARMControl, you can easily control the DC motor speed and direction, you can also control2Phase stepper motor,5line4Phase stepping motor. Is a 4-wheel car, intelligent car necessary part.
Feature
Driver chips:L293D dual H-bridge DC motor driver chip
Diven part of the terminal supply area Vs:+5 V ~ +16 V; such as the need to take power within the board, the supply area Vs:6V to 16V
Drive part of the peak current Io:1A
Logical part of the operating current range:0 ~ 36mA
Control signal input voltage range (IN1 IN2 IN3 IN4IN5 IN6 IN7 IN8)
Low level:-0.3V VIN 1.5V
High level:2.3V Vin Vss
Enable signal input voltage range (EN1 EN2EN3 EN4)
Low level:-0.3 Vin 1.5V (control signal is invalid)
High level:2.3V Vin Vss (control signal)
Maximum power consumption:20W (temperature T = 75 ° C) the
Storage Temperature:-25 ° C to +130 ° C
Driver Board Size:37mm * 90mm
Other extensions:control direction indicators, the logic part of the plate to take power interface.
Package included
1 x L293D 4 DC Motor Drive Module
Weight | 0.017 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.