MAX97220 Differential to Balanced Power Amplifier Board Single-Channel Output AMP HIFI DC 2.5-5.5V
$6.84
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The differential amplifying circuit utilizes the symmetry of the circuit parameters and the negative feedback to effectively stabilize the static operating point, and amplifies the differential mode signal to suppress the common mode signal. It is widely used in the input stage of the direct coupling circuit and the measuring circuit.
Features
1.High quality signal;
2.Stable audio signal;
3.Low power consumption;
4.Support disabling control.
Parameters
1.Product Name:MAX97220 Power Amplifier Board
2.Working Voltage:DC 2.5V-5.5V
6.Working Temperature range:-40→~85→
7.Working Humidity range:0%-95%RH
8.Size:23*20*2.6mm
CTRL Pin
Module enables terminal.Module is enabled and can work normally when input high level signal.Module is disability and can not work normally when input low level signal.Default internal pull-up is high.
Using Steps
1.Make sure wiring diagram as shown;
3.Connect right input voltage at input terminal;
4.Input audio signal;
5.Connect to suitable power amplifier board or headphone or speaker device at audio output socket;
6.Test and use.
Application
1.DIY speaker;
2.Voice intelligent control;
3.Bluetooth signal conversion.
4.Blue ray and DVD Players
5.LCD Televisions
6.Prosumer Audio Devices
7.Set-Top Boxes
8.Simple Multimedia Interfaces
Package included
1 x MAX97220 Power Amplifier Board
Weight | 0.003 kg |
---|
Customers Also Viewed
USR-ES1 W5500 Chip SPI to LAN Ethernet Converter TCP/IP Module WIZ820io
$15.30Converter BoardAdd to cart>>>Manual:Click here to openOverviewUSR-ES1 embeds Wiznet’s W5500 chip, which uses hardware logic gates to implement the transport layer and network layer of the TCP/IP protocol stack (such as TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE, etc.), and integrates The data link layer, physical layer, and 32K bytes of on-chip RAM serve as data transceiving buffers. …
USR-ES1 W5500 Chip SPI to LAN Ethernet Converter TCP/IP Module WIZ820ioRead More
3pcs TEC1-12715 12V Heat Sink thermoelectric Cooler Peltier Plate Module
$32.04Electronic Accessories & SuppliesAdd to cart40 x 40mm TEC1-12715 12V Heatsink Thermoelectric Cooler Peltier Plate ModuleDescriptionSolid state, vibration free, noise-freeSimple to install and operateThe hot surface need to be good heat sinkSpecificationProduct name:thermoelectric cooler plate moduleModel:TEC1-12715Color:whiteCouples:127Voltage:12VUmax:15.4VImax:15AMax power consumption:231WTmax:70°CQcmax T=0(W):137WSize:40 x 40 x 3.3mmWeight:50gPackage included3 x TEC1-12715 cooler plate module
EQKIT KM-1 DC 6-12V PWM Motor Speed Controller Kit DIY Motor Speed Regulator Set Stepless Speed Control
$8.73Module KitsAdd to cartSpecificationsModel:KM-1Operating voltage:DC 6-12VPCB board size:40 x 40mmCircuit descriptionKM-1 uses PWM (pulse width modulation) to control the speed of the motor, adjust the pulse width duty ratio, so that the speed from zero to the maximum speed stepless speed regulation. The wider the crest width of the control waveform, the faster the motor speed; on the …
20pcs 63V 10000UF 105 High Frequency Temp Electrolytic Capacitor 30mm x 50mm Long Life
$108.62Electronic Accessories & SuppliesAdd to cartSpecificationModel:485622Voltage:63VCapacitance:10000UFTemperature:105→Diameter:30mm / 1.1 inchHeight:50 mm / 2 inchFeaturesLong life, high temperatureHigh-frequency capacitorsPackage included20 x Electrolytic Capacitor
Reviews
There are no reviews yet.