6pcs POE Adapter Cable Tape Screened POE Switch Cable POE Splitter injector Power Supply 12V Synthesizer Separator Combiner
$19.39
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The complete Passive Power over Ethernet SET contains two pieces – INJECTOR and SPLITTER. It is suitable for using with products that basically do not support Power Over Ethernet. Passive Power Over Ethernet SET is applicable for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices. Passive Power over Ethernet SET is compatible with most devices available on the market such as D-Link, Linksys, Airlive, Senao, Wline, Micronet, Edimax etc. The devices can be supplied standardly up to 50V. (The power adapter is not included – it is possible to use the power adapter of the powered device as access point, IP camera etc.) Passive PoE`s range is normally form 30-40 metres/100-130 ft (the real distance depends on the power supply, type of cable and powered device).
Contains:INJECTOR and SPLITTER.
Complete set for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices such as D-Link, Ovislink, Senao, Wline, RouterBOARD, WRAP boards and other devices using passive POE injection.
Connector Barrel size is 2.1mm (5.5 x 2.1 mm)
Power Pins 4,5 + and 7,8 –
1. It is very simple to connect a passive PoE. On the lower part, we connect the Ethernet
RJ connector of passive PoE to the PC, Hub or Switch and connect the power adapter
to the power socket.
2. On the opposite end (RJ socket) we connect the Ethernet cable leading to the far end.
3. At the far end, we connect the end of the Ethernet cable to the RJ45 socket and connect
the power connectors and the Ethernet to the powered equipment. The equipment is now
connected by them.
Input / Output Specifications
Supports Voltage:5V, 12V, 24V, 48V
Support Voltage Max Output Current 0.4A Max.
Over Current Protection None
General Sepcifications
Operating Temperature 0° ~ +45°
Storage Temperature -30oC ~ +70oC
CASE OF MATERIAL PVC
Ethernet Date Rate 10/100Mbps
Ethernet Cable TIA/EIA 568 Cat.5
Humidity Up to 90%
Weight:24g*4
DC Plugs 2.1mmx5.5mmx12mm
Length 155mm
Package Included
6 x RJ45-DC Splitter
Weight | 0.177 kg |
---|
Customers Also Viewed
Excellway 10 Sets Mini JST 2.0mm PH 4Pin 26AWG Male Female Connector Plug Wire Cables 300mm
$20.24ConnectorsAdd to cart10 Sets Mini Micro JST 2.0 PH 4-Pin Connector Plug With Wires Cables 300mmSpecificationProduct Name:Connector Plug With WiresPart:Connectors/WiringModel:PH 2.0mmFuel Source:ElectricLength:300mmWire:26AWGQuantity:10 SetsFeaturePitch:2.0Poles:4Applicable wire:AWG 26Voltage rating:250V DC/AC (Effective value)Current rating:2.0AWithstand voltage:800V AC (Effective value)Working Temperature:-25°C ∼ +85°CInsulation resistance:≥ 1000M Contact resistance:≤ 0.02 Applicable PC board thickness:0.8mm – 1.6mmPackage IncludedPH 2.0mm 4-pin Female Housing Connector plug with wire …
Excellway 10 Sets Mini JST 2.0mm PH 4Pin 26AWG Male Female Connector Plug Wire Cables 300mmRead More
12V DC DIY Dosing Pump Peristaltic Dosing Head F Laborator Lab Analytical Water
$36.44Electrical Pump & ValveAdd to cartDescription12V DC DIY Dosing Pump Peristaltic Dosing Head F Laborator Lab Analytical WaterFeaturesSuitable for aquarium, chemicals, liquids, dosing additives.The pump head designed for easy disassembly, easy to clean and maintain.Has been widely used in the field of experimental, biochemical analysis, pharmaceuticals, fine chemicals, biotechnology, pharmaceutical, products, ceramics, water treatment, environmental protection, the powder and soo …
12V DC DIY Dosing Pump Peristaltic Dosing Head F Laborator Lab Analytical WaterRead More
220V 5*12MM Neon Bubble Tube Neon Bubble Lamp Neon Bubble indicator
$2.27Module ComponentsAdd to cartSpecificationName:Neon lamp/neon bulbble indicatorModel:5MM*12MMVoltage:220V(NOTE:To connect to 220V, a 100K-150K resistance value resistor is required. It cannot be used without a resistor)Luminous color:redPackage included1 x Neon lamp
Scape Room Game Props 12V Laser Receiver for Laser Arroy Equipment
$32.39Switch AccessoriesAdd to cartDescriptionMaterial:PlasticColor:BlackPower:AC 12VLaser acceptance range:0-200mSize:61x35x25.5mmFeatures Small size Sensitive Long accept distance, 0-200m Strong resistance to interference.Working mode:When there is no laser light, the receiver is off; Receiver will be switched off after receive the laser signalApplications:photoelectric detection switch, laser counting, timing, security and anti-theft system, laser maze, etcPackage Included1 x 12V Laser Receiver
ADF4350 ADF4355 Differential Single Port Converter Balun 1:1 100KHZ-500MHz
$26.61RF amplifierAdd to cartParameter1. Operating frequency:100KHZ-500MHZ 2. Use 1:1 balun3. Product size:29*19MM (not include SMA seat)4. Product weight:7 gApplicationsRealize mutual conversion between single-port RF signal and differential port RF signal, reduce input and output insertion loss.RF port RFIN/OUT2RF port RFIN/OUT3Package included1 x Converter
10pcs AC-DC 220V to 12V Switching Power Supply Module Isolated Power Supply Bare Board / 12V0.5A
$55.15Power Supply ModuleAdd to cart>>>Manual:Click here to openFeatures1. The product is easy to install and can be used directly on the motherboard.2. There are fixed mounting holes at the four corners to prevent the product from being powered off due to movement/vibration. The fixing holes are straight through 3.2mm.3. Universal input voltage:85-264VAC or 110-370VDC.4. High efficiency, high power density, …
Reviews
There are no reviews yet.