CJMCU-25504 Boost Converter Solar Cell Management Nanopower Energy Collector
$30.60
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The CJMCU-25504 is the first new, smart, integrated energy-harvesting -power management solution ideally suited for ultra-low power applications with special needs. The device is specifically designed to capture and manage microwatts (μW) to milliwatts (mW) of power generated from various sources such as photovoltaic (solar) generators or thermoelectric generators. The bq25504 is the first in its class to implement an efficient boost converter / charger for products and systems that have tight power and operational requirements, such as wireless sensor networks (WSNs). The design of the bq25504 starts with just a tiny watt of power – the boost converter / charger.
After the boost converter / charger is started, energy can be efficiently extracted from a low voltage output collector such as a thermoelectric generator (TEG) or one / two solar panels. The boost converter can pass V as low as 330mVINStart, start, you can rely on as low as 80mV VINContinue to collect energy.
The bq25504 also implements a programmable maximum power point tracking sampling network to optimize power transfer to the device. VIN_DC open-circuit voltage sampling is programmed by an external resistor and is controlled by an external capacitor (CREF) Hold.
For example, a solar cell with an open-circuit voltage of 80% at maximum power point sets the resistor divider to 80% of the VIN_DC voltage at which point the network will control VIN_DC near the sampled reference voltage. Alternatively, an external reference can also be provided by a microcontroller (MCU) to produce a more complex MPPT algorithm.
The bq25504 is designed to flexibly support a wide range of energy storage components. Energy harvester energy sources are often not fixed, or change over time. Systems typically require specific types of energy storage elements, such as rechargeable batteries, supercapacitors, or traditional capacitors. Energy storage components ensure that the system provides constant power when needed. With energy storage components, the system is also capable of handling any current that is not directly available from the input source.
To prevent damage to customers’ energy storage components, the device monitors maximum and minimum voltage with reference to user-programmed undervoltage (UV) and overvoltage (OV) levels.
In order to further help users to strictly manage their energy budget, when the battery or capacitor voltage drops below the preset threshold, bq25504 will switch the battery normal state flag and send it to connected to the microprocessor . This warning signal should trigger the load current drop to prevent the system from entering undervoltage condition. OV, UV, and battery normal thresholds are programmed separately.
Characteristic
Ultra-Low Power, High Efficiency – Boost Converter / ChargerContinuous energy harvesting from low voltage input supply:VIN≥ 80mV (typical)
Ultra-low quiescent current:IQ.
Cold start voltage:V.IN≥ 330mV (typical)
Programmable Dynamic Maximum Power Point Tracking (MPPT)
Package included
1 x Energy Collector
Weight | 0.003 kg |
---|
Customers Also Viewed
Multiple Car Toys Magnetic Puzzle Box Book Educational Book Kids Learning Gift
$52.64MathematicsAdd to cartPackage included10 x Card76 x MagnetsFeatures1.Developing kids’ intelligence.2.Teaching kids to know more words.3.Easy for storage.SpecificationsColor:MulticolorMaterial:Paperboard, MagnetismSize:30x4x21.5cm
Basic Starter Kit UNO R3 Mini Breadboard LED Jumper Wire Button with Box for Geekcreit for Arduino – products that work with official Arduino boards
$18.62Module KitsAdd to cartDescriptionsPerfect for Shield Prototyping and TestingPlastic housing, metal contact clipsAccept wire with diameter 20-29AWGVolatge/current:300V/3-5A400 tie-point2 Power Lanes, Tie-point 1001 Double-strip, Tie-point 300Solderless Breadboard Size:82x55x8.5mmPackage included1 x Uno R3 Development Board1x 400 hole Breadboard10 x 220Ω resistor 5% carbon film10 x 1k resistor 5% carbon film10 x 10k resistor 5% carbon film10 x 100k resistor 5% …
3pcs ESP32-S WiFi + Bluetooth ESP32S Serial to WiFi Dual Antenna Module
$29.27Smart ModuleAdd to cartDescriptionThe main chip uses a low-power dual-core 32-bit CPU with a frequency of up to 240MHz and computing power of up to 600DMIPS.Default 32Mbit SPI Flash, 520KB SRAMSupport SoftAP and Station modeUltra-small 802.11b/g/n Wi-Fi + BT/BLE SoC moduleSupport UART/SPI/I2C/I2S/PWM/ADC/DAC, etc.Support for firmware upgrade (FOTA)Antenna supports onboard antenna or IPEX block outputPackage includes3 x Wifi module
Geekcreit 433MHz DC 12V 10A Relay 1CH Channel Wireless RF Remote Control Switch Transmitter with Receiver
$15.30Smart ModuleAdd to cartIf you need more Transmitter, please buy Product ID:1215079>>>Manual:Click here to openFeaturesEasy to install and easy to carryWith a slidable cover on the remote controlWith a hook on the remote controlUse Learning coding, stable and reliableThe wireless signal can pass through walls, floors and doorsYou can turn on or turn off the receiver with transmitter …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStream
$56.69Electrical Pump & ValveAdd to cartFeature*CO2 Refill Adapter is used to fill CO2 into your Sodastream tank.*Adjustable valve pin ensures compatibility with any cylinder valve variation.*Easy to install and use.*Made of high quality metal, high hardness and durable.Specification*Material:Metal*Color:Silver (As Pictures Show)*Inner Thread:TR21-4*Outer Thread:W21.8-14Package Contents1*CO2 Refill AdapterNotes:The real color of the item may be slightly different from the pictures shown on …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStreamRead More
30pcs 2.5-5.5V TTP223 Capacitive Touch Switch Button Self Lock Module
$15.15Other Module BoardAdd to cartFeatures 1. Size:15*11mm 2. Power:2.5-5.5V 3.Trigger setting mode:(1->Short;0->No Short) AB=00:No-lock High TTL level output; AB=01:Self-lock High TTL level output; AB=10:No-lock Low TTL level output; AB=11:Self-lock Low TTL level output; Package included 30 x 2.5-5.5V TTP223 Capacitive Touch Switch Button Self-Lock Module For
NE555 Pulse Module LM358 Duty and Frequency Adjustable Square Wave Signal Generator Upgrade Version
$6.55Test & Measuring ModuleAdd to cartFeature1. Used as a square wave signal generator to generate square wave signals for experimental development.2. Used to generate a square wave signal that drives the stepper motor driver.3. Generate adjustable pulses for use by the MCU.4. Generate adjustable pulses to control the associated circuitry.Description1. Size:3.5CM * 4.6CM1. The main chip:LM358;2. Input voltage:5V-12VDC.3. Input current:≥100MA;4. …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module Kit
$13.73DIY Electronic KitsAdd to cartFeatureModel:AUL-10Supply voltage:DC9V-12VAudio input:0~1.5VrmsPCB size:66 x 28mm (L x W)Light row size:62.5 x 5 x 10.7mm (L x W x H)Two indication modes:bar indication and fire spot indication (Realized by MOD short-circuit point)Lamp row offers two kinds of vertical and horizontal installationTin-treated solder padsNote:Before power on, please confirm the polarity of the power supply is correct …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module KitRead More
Reviews
There are no reviews yet.