CJMCU-25504 Boost Converter Solar Cell Management Nanopower Energy Collector
$30.60
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The CJMCU-25504 is the first new, smart, integrated energy-harvesting -power management solution ideally suited for ultra-low power applications with special needs. The device is specifically designed to capture and manage microwatts (μW) to milliwatts (mW) of power generated from various sources such as photovoltaic (solar) generators or thermoelectric generators. The bq25504 is the first in its class to implement an efficient boost converter / charger for products and systems that have tight power and operational requirements, such as wireless sensor networks (WSNs). The design of the bq25504 starts with just a tiny watt of power – the boost converter / charger.
After the boost converter / charger is started, energy can be efficiently extracted from a low voltage output collector such as a thermoelectric generator (TEG) or one / two solar panels. The boost converter can pass V as low as 330mVINStart, start, you can rely on as low as 80mV VINContinue to collect energy.
The bq25504 also implements a programmable maximum power point tracking sampling network to optimize power transfer to the device. VIN_DC open-circuit voltage sampling is programmed by an external resistor and is controlled by an external capacitor (CREF) Hold.
For example, a solar cell with an open-circuit voltage of 80% at maximum power point sets the resistor divider to 80% of the VIN_DC voltage at which point the network will control VIN_DC near the sampled reference voltage. Alternatively, an external reference can also be provided by a microcontroller (MCU) to produce a more complex MPPT algorithm.
The bq25504 is designed to flexibly support a wide range of energy storage components. Energy harvester energy sources are often not fixed, or change over time. Systems typically require specific types of energy storage elements, such as rechargeable batteries, supercapacitors, or traditional capacitors. Energy storage components ensure that the system provides constant power when needed. With energy storage components, the system is also capable of handling any current that is not directly available from the input source.
To prevent damage to customers’ energy storage components, the device monitors maximum and minimum voltage with reference to user-programmed undervoltage (UV) and overvoltage (OV) levels.
In order to further help users to strictly manage their energy budget, when the battery or capacitor voltage drops below the preset threshold, bq25504 will switch the battery normal state flag and send it to connected to the microprocessor . This warning signal should trigger the load current drop to prevent the system from entering undervoltage condition. OV, UV, and battery normal thresholds are programmed separately.
Characteristic
Ultra-Low Power, High Efficiency – Boost Converter / ChargerContinuous energy harvesting from low voltage input supply:VIN≥ 80mV (typical)
Ultra-low quiescent current:IQ.
Cold start voltage:V.IN≥ 330mV (typical)
Programmable Dynamic Maximum Power Point Tracking (MPPT)
Package included
1 x Energy Collector
Weight | 0.003 kg |
---|
Customers Also Viewed
USR-ES1 W5500 Chip SPI to LAN Ethernet Converter TCP/IP Module WIZ820io
$15.30Converter BoardAdd to cart>>>Manual:Click here to openOverviewUSR-ES1 embeds Wiznet’s W5500 chip, which uses hardware logic gates to implement the transport layer and network layer of the TCP/IP protocol stack (such as TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE, etc.), and integrates The data link layer, physical layer, and 32K bytes of on-chip RAM serve as data transceiving buffers. …
USR-ES1 W5500 Chip SPI to LAN Ethernet Converter TCP/IP Module WIZ820ioRead More
3pcs TEC1-12715 12V Heat Sink thermoelectric Cooler Peltier Plate Module
$32.04Electronic Accessories & SuppliesAdd to cart40 x 40mm TEC1-12715 12V Heatsink Thermoelectric Cooler Peltier Plate ModuleDescriptionSolid state, vibration free, noise-freeSimple to install and operateThe hot surface need to be good heat sinkSpecificationProduct name:thermoelectric cooler plate moduleModel:TEC1-12715Color:whiteCouples:127Voltage:12VUmax:15.4VImax:15AMax power consumption:231WTmax:70°CQcmax T=0(W):137WSize:40 x 40 x 3.3mmWeight:50gPackage included3 x TEC1-12715 cooler plate module
EQKIT KM-1 DC 6-12V PWM Motor Speed Controller Kit DIY Motor Speed Regulator Set Stepless Speed Control
$8.73Module KitsAdd to cartSpecificationsModel:KM-1Operating voltage:DC 6-12VPCB board size:40 x 40mmCircuit descriptionKM-1 uses PWM (pulse width modulation) to control the speed of the motor, adjust the pulse width duty ratio, so that the speed from zero to the maximum speed stepless speed regulation. The wider the crest width of the control waveform, the faster the motor speed; on the …
20pcs 63V 10000UF 105 High Frequency Temp Electrolytic Capacitor 30mm x 50mm Long Life
$108.62Electronic Accessories & SuppliesAdd to cartSpecificationModel:485622Voltage:63VCapacitance:10000UFTemperature:105→Diameter:30mm / 1.1 inchHeight:50 mm / 2 inchFeaturesLong life, high temperatureHigh-frequency capacitorsPackage included20 x Electrolytic Capacitor
Reviews
There are no reviews yet.