AD831 High Frequency RF Mixer inverter
$32.79
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The ad831 has is a low distortion, wide dynamic range, single chip mixer, suitable for such as HF and VHF Receiver RF-IF frequency, DMR base station in the second mixer, a DC – baseband conversion, quadrature modulation and demodulation, and ultrasound imaging, Doppler frequency shift detection and other applications.
Characteristics
The ad831 has provide + 24 DBM third-order intermodulation intercept point, realization of – 10 DBM Lo power, without the need for a high power Lo drive, there is no corresponding shielding and isolation problems, therefore, compared with the passive mixer to improve the performance of the system, reduce the system cost.
The mixer is designed as a single power supply, RF, IF and LO ports with DC isolation capacitor, easy to use. The operating frequency of the RF and LO inputs can be as high as 500MHz. IF output for single ended voltage output. With 250 MHz output bandwidth. A single resistor connected between pins OUT and FB is used to set the gain. The amplifier has low DC offset characteristics, so it can be used in DC – baseband frequency conversion and quadrature amplitude demodulation.
When the mixer’s output amplifier and the optimum source impedance, the SSB noise figure of the mixer is 10.3 dB at 70 MHz. Different from the passive mixer, there is no insertion loss, no external duplex device, and no passive AD831.
Technical indicators
RF input:0.1-500MHz
RF input:+10dBm (1dB compression point)
Local oscillator input:0.1-500MHz
Local oscillator input:-10dBm
IF output:0.1-200MHz
Supply voltage:9–11V single ended power supply
Package included
1 x AD831 High Frequency RF Mixer Inverter
Weight | 0.009 kg |
---|
Customers Also Viewed
433MHz 100M Wireless Transceiver Module Kit Transmitter + Receiver + 2pcs Copper Spring Antenna
$8.73Smart ModuleAdd to cartDescriptionSTX882 ASK Wireless Remote Control Transmitter ModuleSTX882 is a ASK transmitter module with small size, ultra high power, low harmonics. With high stability, it can be achieved at 50mW power when the voltage is 3.6V, it is the maximum transmitter power module under the the same voltage in the market. Data port of the module …
5V 3.3V FT232RL USB Module To Serial 232 Adapter Download Cable
$10.92Other Module BoardAdd to cart5V 3.3V FT232RL USB Module To Serial 232 Adapter Download Cable ForFeature1. With FT232RL chipset, support 3.3V, 5V2. With over current protection, using 500MA self-restore fuse3. RXD/TXD transceiver communication indicator4. Pin definition:DTR,RXD,TX,VCC,CTS,GNDPackage included1 x USB Module
12V/220V 2CH HIFI Audio Stereo Power Amplifier Bass bluetooth FM Radio Car Home
$74.91Solar CollectorsAdd to cartSpecificationsColo:BlackModel:G30Input voltage:AC 220V/ DC12V(in car)Plug:EU plug(sent with an adapter according to your country)bluetooth:SupportRMS power:18W x2Peak power:45W x2Load impedance:4-16ΩSNR:85 dbFM frequency:87.5-108MHzDistoration rate:0.05%Frequency:10Hz-20KHzSize:Approx. 19×12.5×4.5cm/ 7.48×4.92×1.77inchFeatures-Mini HIFI digital bluetooth audio power amplifier.-TF Card, AUX, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-With treble, bass, and volume control, very easy to use.-Low distortion supplies a …
12V/220V 2CH HIFI Audio Stereo Power Amplifier Bass bluetooth FM Radio Car HomeRead More
KY-011 5mm 2 Color Red and Green LED Common Cathode Module Board for Arduno Diy Starter Kit 2-color KY011
$4.36LED BoardAdd to cartSpecificationsColor:Green + RedDiameter:5mmPackage Type:DiffusionVoltage:2.0-2.5vCurrent:10mAViewing angle:150 degreeWavelength:571 +644 nmLuminous intensity (MCD):20-40; 40-80Stent type:long-leggedPackage Included1 x KY-011 Two Color Red and Green LED Module for Arduno
1000Pcs 5 Colors 3mm F3 Ultra Bright Round LED Diode Kit
$19.67Electronic Accessories & SuppliesAdd to cart1000Pcs 5 Colors 3mm F3 Ultra Bright Round LED Diode Kit Red / Green / Blue / White / YellowParameterWorking current:20 (mA)Working voltage:Red:1.9V-2.1V Yellow:1.9V-2.1V Blue:3.0V-3.2V Green:3.0V-3.2V White:3.0V-3.2VMCD:Red:1000-1500 Yellow:700-900 Blue:2000-3000 Green:7000-9000 White:6000-8000Wave length:Red:620-625 Yellow:588-590 Blue:455-465 Green:567-570 White:Color temperature 8000Each colors 200Pcs, total 1000PcsPackage included2 x 500Pcs 5 Colors LED Diode kit
4 Digit LED Display Tube 7 Segments TM1637 50x19mm Blue Clock Display Colon Module
$13.11Display ScreenAdd to cartFeatureThis is a basic 4-digit 7-segment display module.The display features double points in midle. The decimal point per digit not active.Module connecting to digital I/O on 2 pins.For Arduino use library:TM1637.hPackage includes1 x LED Display TubeSketch include inchTM1637.hinch // include the TM1637 libraryTM1637 display(2, 3);// // initialize the library for pins 2, 3void setup()void loop()
DIY LED Light String Kit Part for Lego 10267 House Model Building Gingerbread Flash
$69.97DIY Electronic KitsAdd to cartSpecification1. Name:LED Light Set2. Model:D858093. Material:Plastic4. Power:Less Than 5V5. Fitment:For Lego 10267Note1. LED Light Set Only. Toy is not included.2. Manual installtion. It needs to be assembled by yourself.Package Included10 x 15cm Bit Light(Warm White)1 x 15cm Enhance Bit Light(Warm White)4 x 30cm Flashing Bit Light(Red)4 x 30cm Flashing Bit Light(White)1 x Multi Colour Light …
DIY LED Light String Kit Part for Lego 10267 House Model Building Gingerbread FlashRead More
Reviews
There are no reviews yet.