TF03K 100V50A Coulomb Counter Meter Battery Capacity indicator Voltage Current Display TTL232 Li-ion Lithium lifepo Lead Acid eBike RV with 1M Shielded Cable
$86.10
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
TF03K is a kind of high accuracy current type battery indicator, TF03K can test the voltage, current and capacity of lead-acid/lithium-ion battery, and display them with intuitive battery symbol and percentage. Users can know the state of battery in time. TF03K has function of memory. This battery indicator is suitable for mobile and portable equipments, ups, electric vehicles, ebike, battery cars, balance cars, cleaning machines and so on.
TF03K is different with voltage type battery indicator, TF03K has high accuracy and high reliability. So it is expensive than voltage type battery indicator like LY4,LY6……
ParameterMinTypeMaxUnit
Working voltage10.050.0120.0V
Working dissipation 10.015.0mA
Standby dissipation 1.02.0mA
Capacity accuracy ±2.0 %
Voltage accuracy ±2.0 %
Current accuracy ±2.0 %
Backlight on current 80.0100.0mA
Backlight off current 50.060.0mA
Capacity setting value0.1 999Ah
Current of 50A sampler0.0:50.075.0A
Ambient Temperature02035→
Weight75g
Size94x55x20mm
Install
1. In the device panel to open a rectangular hole and two screw holes,
2. Then install the battery indicator from the front of the panel and place the indicator housing into the rectangular opening.
Connect
1. Prepare a shielded wire and a wire (0.3-0.75 mm
2
);
2. One end of the wire connects to B+ of battery;
3. Another end connects to B+ of sampler (any one is ok);
4. The B- of sampler connects to B- of battery;
5. P- of sampler connect to P- of output;
6. Finally connect sampler to indicator by the shielded wire.
Use setting
Capacity and voltage setting
1. Press the inchOKinch key for 3s to enter the setting menu;
2.Click the “up Inchor“down Inch key to select the setting items
CAP—capacity setting:an initial capacity has been set at factory, please set it according to the real capacity;
FULL U—full voltage setting:when the voltage is higher than it the percentage will be 100%;
ZERO_U—zero_voltage setting:when the voltage is lower than it the percentage will be 0%, backlight off , if you keep discharge the LCD flicker, the alarm indicator display and buzzer warning;
Alarm—alarm setting:when the capacity is lower than it the LCD flicker and buzzer warning.
Note:Generally the FULL U and ZERO_U do not need to set. The default is 0V, which is the invalid. If you want set, please understand the actual charge and discharge voltage of battery firstly.
3. Select“CAP Inchand click“OK Inchkey to enter the capacity setting; The set bit flicker, click the“OK Inchkey can select other bits, click the“up Inchor“down Inch key to plus and minus the value; after this click the“back Inchkey to quit capacity setting;
4. We can set other items with the same method as capacity. When all the items are set and all the values are correct, click the inchbackinch key to save the set and quit the setting menu;
5. Cut off and Re-power, it will work normally.
Package included
1 x coulomb counter
1 x sampler
1 x 1M shielded wire
Weight | 0.208 kg |
---|
Customers Also Viewed
10pcs MAX9814 High Performance Microphone AGC Amplifier Module CMA-4544PF-W
$90.79Amplifier BoardAdd to cartSpecifications– Supply Voltage:2.7v-5.5v @ 3mA current– Output:2Vpp on 1.25V bias– Frequency Response:20Hz – 20KHz– Programmable Attack and Release Ratio– Automatic gain, selectable max from 40dB, 50dB or 60dB– Low Input-Referred Noise Density of 30nV/– Low THD:0.04% (typ)– Low Power Shutdown Mode– Built-in 2V low-noise microphone bias– -40°C ~ +85°C extended temperature rangePackage included10 x Microphone …
10pcs MAX9814 High Performance Microphone AGC Amplifier Module CMA-4544PF-WRead More
T-AMP 2 x 15W TA2024 Digital Audio Amplifier Board Mini AMP
$19.04Amplifier BoardAdd to cartFeature1. The power to more than 12V current 3A2. The speaker is best to use an impedance of 4 ohms, some of the high sensitivity3. For some signal level is relatively low tone, to add the preamplifier to play the effect4. Note the positive and negative can not be reversed, use the power supplyElectrical CharacteristicsIts …
T-AMP 2 x 15W TA2024 Digital Audio Amplifier Board Mini AMPRead More
Mega 2560 R3 ATmega2560-16AU Control Module without USB Cable
$44.54Motherboard & Development BoardAdd to cartDescriptionThis is compatible R3 Mega2560 ATmega2560-16AU control board without USB cableMega is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal …
Mega 2560 R3 ATmega2560-16AU Control Module without USB CableRead More
20W 420*380*3mm Folding PET Monocrystalline Silicon Solar Panel with Cable Dual USB
$93.62Smart Robot & Solar PanelAdd to cartSpecificationsMaximum Power(Pmax):20WOpen Circuit Voltage(Voc):18VMaximum Power Voltage(Vmp):12vMaximum Power Current(Imp):1.1AMaximum System Voltage(Imp):1000vOutput:USB 5V & DC 18VQuantity of cell:36Cell Effcience %:20%Output Tolerance:±10%Size:425*380*3mmStandard Test Conditions:Irradiance 1000w/m2Temoerature 25.C,AM=1.5Package Included1 x Solar panel with cable
5pcs 8Channel DC 5V RS485 Modbus RTU Control Module UART Relay Switch Board PLC
$45.10Relay ModuleAdd to cartDescriptions– Operating Voltage:DC 5V(5V Version)– Operating Current:10-15MA– inchopeninch inchcloseinch inchMomentaryinch inchSelf-lockinginch inchInterlockinch inchDelayinch 6 Commands– Two instruction-control mode:AT command and MODBUS command– Under the AT command ,the maximum delay is 9999 seconds– Under the MODBUS command ,the maximum delay is 255 seconds– AT commands can be made serial HyperTerminal (serial assistant) Enter;– MODBUS commands can …
5pcs 8Channel DC 5V RS485 Modbus RTU Control Module UART Relay Switch Board PLCRead More
LT1083cp 7A AC 35V Rectifier Filter Power Supply Board DIY Home theater Sound Amplifier Voltage Regulator
$24.04Power Supply ModuleAdd to cartDescriptionLT1083CP feature description (emphasis):It is a linear step-down block. Although the voltage adjustment can be adjusted from 2.5V to 37V, it is recommended that the working differential pressure is within 10V, because the power consumption is proportional to the differential pressure, the greater the differential pressure, the more heat The larger the output current, the …
Reviews
There are no reviews yet.