TF03K 100V50A Coulomb Counter Meter Battery Capacity indicator Voltage Current Display TTL232 Li-ion Lithium lifepo Lead Acid eBike RV with 1M Shielded Cable
$86.10
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
TF03K is a kind of high accuracy current type battery indicator, TF03K can test the voltage, current and capacity of lead-acid/lithium-ion battery, and display them with intuitive battery symbol and percentage. Users can know the state of battery in time. TF03K has function of memory. This battery indicator is suitable for mobile and portable equipments, ups, electric vehicles, ebike, battery cars, balance cars, cleaning machines and so on.
TF03K is different with voltage type battery indicator, TF03K has high accuracy and high reliability. So it is expensive than voltage type battery indicator like LY4,LY6……
ParameterMinTypeMaxUnit
Working voltage10.050.0120.0V
Working dissipation 10.015.0mA
Standby dissipation 1.02.0mA
Capacity accuracy ±2.0 %
Voltage accuracy ±2.0 %
Current accuracy ±2.0 %
Backlight on current 80.0100.0mA
Backlight off current 50.060.0mA
Capacity setting value0.1 999Ah
Current of 50A sampler0.0:50.075.0A
Ambient Temperature02035→
Weight75g
Size94x55x20mm
Install
1. In the device panel to open a rectangular hole and two screw holes,
2. Then install the battery indicator from the front of the panel and place the indicator housing into the rectangular opening.
Connect
1. Prepare a shielded wire and a wire (0.3-0.75 mm
2
);
2. One end of the wire connects to B+ of battery;
3. Another end connects to B+ of sampler (any one is ok);
4. The B- of sampler connects to B- of battery;
5. P- of sampler connect to P- of output;
6. Finally connect sampler to indicator by the shielded wire.
Use setting
Capacity and voltage setting
1. Press the inchOKinch key for 3s to enter the setting menu;
2.Click the “up Inchor“down Inch key to select the setting items
CAP—capacity setting:an initial capacity has been set at factory, please set it according to the real capacity;
FULL U—full voltage setting:when the voltage is higher than it the percentage will be 100%;
ZERO_U—zero_voltage setting:when the voltage is lower than it the percentage will be 0%, backlight off , if you keep discharge the LCD flicker, the alarm indicator display and buzzer warning;
Alarm—alarm setting:when the capacity is lower than it the LCD flicker and buzzer warning.
Note:Generally the FULL U and ZERO_U do not need to set. The default is 0V, which is the invalid. If you want set, please understand the actual charge and discharge voltage of battery firstly.
3. Select“CAP Inchand click“OK Inchkey to enter the capacity setting; The set bit flicker, click the“OK Inchkey can select other bits, click the“up Inchor“down Inch key to plus and minus the value; after this click the“back Inchkey to quit capacity setting;
4. We can set other items with the same method as capacity. When all the items are set and all the values are correct, click the inchbackinch key to save the set and quit the setting menu;
5. Cut off and Re-power, it will work normally.
Package included
1 x coulomb counter
1 x sampler
1 x 1M shielded wire
Weight | 0.208 kg |
---|
Customers Also Viewed
300W Digital Amplifier Speaker Protection Board 2.1 Channel Relay Speaker Protection Module Boot Delay DC Protection
$15.30Relay ModuleAdd to cartFeatures1.With delay and DC protection (default 1.8V control, DC sensitivity can be adjusted)2. This common power DC protection board uses an optocoupler. Since the optocoupler has input and output isolation,3. Electrical signal transmission has the characteristics of unidirectionality, so it has good electrical insulation and anti-interference ability.4. Since the input end of the optocoupler belongs …
AB18 2SA1943/2SC5200 High Power 300W + 300W Dual Channel Class A/B Power Amplifier Board for Sound Speaker DIY
$125.17Amplifier BoardAdd to cartProduct description1. Using Japan imported original brand new 2SA1943/2SC52002. Electrolytic capacitor adopts imported electrolysis to ensure strong continuous power support.3. The resistor uses high-precision resistors, and the main circuit uses high-precision resistors with an accuracy of ÷ 1% to ensure a good signal-to-noise ratio for the whole machine.4. The PCB adopts 1.6mm thick double-sided sheet, …
5pcs DMP-L1 WiFi intelligent Lighting Module Built-in ESP ESP8285 WiFi Chip for Smart Home
$28.82Smart ModuleAdd to cartDescriptionThe core processor of DMP-L1 module adopts industrial chip ESP8285. The chip integrates an enhanced version of the Tensilica’s L106 Diamond Series 32-bit core processor in smaller size packages. ESP8285 has a complete Wi-Fi network function, which can be used independently from the controller. Its built-in cache memory greatly provides CPU performance.DMP-L1 module supports standard …
5pcs DMP-L1 WiFi intelligent Lighting Module Built-in ESP ESP8285 WiFi Chip for Smart HomeRead More
Wareshare 5.5 inch AMOLED HDMI Display Capacitive Touch Screen with Tempered Glass Support for NVIDIA Jetson Nano Raspberry Pi
$229.66Display ScreenAdd to cartDocumentsManual:Click here to openDatasheet:Click here to openSoftwarePanasoni SDFormatterWin32DiskImagerPuTTYOverviewThis product is a universal 5.5-inch HDMI display with 1080≠1920 ultra-clear resolution and a capacitive touch panel. Support for Raspberry Pi and various mini PCs, also as a computer monitor.Features5.5inch AMOLED, 1080×1920 resolution.Toughened glass capacitive touch panel.Supports popular mini PCs such as Raspberry Pi, as well as general …
5pcs 20x20x15mm DIY CPU IC Chip Heat Sink Extruded Cooler Aluminum Heat Sink
$4.36Electronic Accessories & SuppliesAdd to cartFeatureAluminum heat sinks for electronics, computers, electrical facilities, play a cooling effectSpecificationMaterials:AluminumSize:20*20*15mm (L*W*H)Color:SilverQty:5pcsPackage includes5 x CPU IC Chip Aluminum Heat Sink
5Pcs Yellow Backlight 1602 Character LCD Display Module
$24.89Display ScreenAdd to cartDescriptionLCD display module with yellow backlightWide viewing angle and high contrastBuilt-in industry standard HD44780 equivalent LCD controllerCommonly used in:copiers, fax machines, laser printers, industrial test equipment,networking equipment such as routers and storage devicesLCM type:CharactersCan display 2-lines X 16-charactersOperate with 5V DCModule dimension:80mm x 36mm x 12mmViewing area size:64.5mm x 16mmPackage included5 X LCD display module
Bathtub Caddy Bamboo Bath Tub Holder Bathroom Tray Glass Book Reading Rack Stand
$106.76FoamAdd to cartSpecificationMaterial:BambooColor:WoodSize:(L)X(W)X(H)105X22X4cm/41.34inchX8.66inchX1.57inch(appr.)Features1. Constructed from durable bamboo and metal supporting frame in excellent craftsmanship for many years use.2. Varnish processing on surface, lightweight and easy to operate.3. Books can be held with metal rack stably for reading when bathing.4. Books, phone, towl, and food can be placed on it for convenient reach.5. Its length is adjustable between …
Bathtub Caddy Bamboo Bath Tub Holder Bathroom Tray Glass Book Reading Rack StandRead More
Reviews
There are no reviews yet.