M5Stack Servo Kit 180 Degree Micro Servo 9g SG90 Servo UIFlow Helicopters Drones Airplane

Description
Servo Kit 180 is a 9g servo with LEIGO compatible fixed bracket.There are 180 specifications.The independent design of the fixed bracket can be easily disassembled, and the product is completely designed according to the LEIGO standard unit,so that you can easily combine with LEIGO series products, play unlimited creativity.The rudder plate is redesigned, it can be directly connected with LEIGO parts. No matter 180 servo, it is very easy for beginners to use.Even if you don’t know how to program, you can easily drive it with UIFlow.There is no need to use a dedicated servo-drive board with feedback control and a complicated gear. Any common pwm driver or a microcontroller can easily control this servo. Compared to driving a stepper motor, a servo is much simpler to use. You can use it to do interesting small projects requiring angular movement and/or control.If you feel that the cable is not long enough, you can purchase the servo extension cable to extend it. The yellow wire is for the control signal, brown is for the ground, and the red wire is for the Vcc (voltage).180 servo can only control angle.360 servo can’t control the angle, but you can adjust the speed and direction by controlling PWM.When using the servo, pay attention to the power supply current and voltage to prevent burnout.
Features
Micro servo system
LEIGO compatible
Easy to control
Support for Ardui、UIFlow
Package Included
2x SG90 Servo 180 optional
2x GROVE2SERVO adapter
2x Elastic
2x Fixed base of servo
2x Special steering wheel
2x Axle connector
4x Conncetor peg with friction
1x Frame 5×7-module
2x Servo accessories package
2x M2*4mm self tapping screw
2x Extension wire 30CM
Specifications
Resources:Parameter
Gear material:Metal motor teeth, plastic gear
PWM:50Hz/0.5~2.5MS
Servo weight:9g
Locked rotor current:750mA
No-load current:60mA
Torque:1.6kgcm/4.8V;1.8kgcm/6.0V
180 Servo speed:0.1sec/60/4.8V;0.09sec/60/6.0v
dead zone:8┢m
Spline:20Teeth
Voltage:4.8~6.0V
Spline:20Teeth
Cable length:3cm
net weight:44g
Gross weight:49g
Product Size:40*12*36mm
Package Size:73*45*23mm
Example
1. ARDUI
Connecting the 360 will control the speed and direction, and connecting the 180 servo will control the angle（360 servo duty cycle 0~7.075 clockwise rotation ，greater than 7.625 counterclockwise rotation，the relationship between rotation speed and duty cycle is nearly linear)
Click here to get code.
2. UIFlow
This is an example of a simulated radar,you need a ToF Unit.
Click here to get code.