SX1278 Ra-06 LoRa WIFI Wireless Module Spread Spectrum Communication 433MHz Wireless Serial Port UART interface
$14.82
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
Ra-06 Lora module is an embedded wireless data transmission module based on Lora spread spectrum technology. It uses the LoRa network to provide users with wireless data transmission functions. Supports point-to-point communication protocol, serial port transparent transmission communication, private protocol and ad hoc network protocol of loRa gateway.
The Ra-06 LoRa module has built-in SX1276 and Huada ultra-low power 32-bit cortex M0 + core MCU, 8K RAM, 64K FLASH. Runs a private networking protocol that can be independently developed by Anxin (LoraWan is not supported). Supports RTC wake-up and external pin interrupt wake-up under deep sleep. Various parameters such as serial port speed, transmit power, air speed, working mode can be modified online by AT instruction.
The wireless communication part of the Ra-06 LoRa module is based on Semtech SX1276 / SX1278’s LoRa spread-spectrum modulation technology. It has ultra-high receiving sensitivity and strong anti-interference ability. It adopts efficient forward error correction coding technology and has a very low bit error rate. And long-term stable data transmission capabilities. Modules and gateways run a star-shaped ad hoc network protocol that Anxin can independently develop. After the module is powered on, it can automatically find and join the gateway. There are three operation modes to choose to join the gateway.
Function
Frequency hopping communication, you can customize the frequency hopping list, select a frequency according to the frequency list for frequency hopping. Channel detection, channel avoidance, the module performs channel activity detection before sending data, and immediately delays avoidance after interference is found. Packet filtering based on the address set by the module. If the address does not match, the packet is not received. Set the network number, and the module communicates in groups. Wake-in-air technology.
Parameter
Voltage:1.8-3.6V
Current:Low power operation (standby)
Deep sleep
Deep sleep + timer work
Communication frequency:410MHZ-525MHZ
Transmission power:2-20dBm
Working temperature:-40 ~ + 85 degree
Storage temperature:-40 ~ + 90 degree
Operating humidity:10 ~ 90% RH (non-condensing)
Storage humidity:10 ~ 90% RH (non-condensing)
Communication distance:> 5km
Package included
1 x Wireless Module
Module software configuration
PC connection module serial port RX0, TX0. The default model rate is 9600, stop bit 1, even parity.
Module operation mode
When the module is powered on, it automatically enters the low-power operation mode. When the CPU is idle, it automatically shuts down, but the peripheral and IO ports are unchanged. Serial input AT command can wake up the CPU immediately, respond and process the command. After the task is processed, the CPU goes to sleep.
Try to enter a low-power sleep state when the CPU is idle. Low current operation is less than 350uA. Enter the command to enter deep sleep mode:AT + MODE = 1, at this time the power consumption reaches the minimum, and the current is 0.7uA. At this time, the timer is turned off, the module cannot perform any work, and the wake-up method:input arbitrary data into the serial port. AT + MODE = 2000, the module enters deep sleep mode, but when the timer is turned on, it will automatically wake up after 2000 milliseconds. At this time, the module current is 1uA. Can also actively wake up:input arbitrary data to the serial port.
Frequently Asked Questions
Q:What is Ra-06 interface, SPI or UART
A:Ra-06 is UART interface, Ra-01 & Ra-02 is SPI interface
Q:Can the MCU in Ra-06 be used to develop sensors
A:Temporarily does not support secondary development
Q:Can Ra-06 communicate with Ra-01
A:As long as the parameter settings of the two are correct, they can communicate with each other.
Q:Why is the power consumption difference between Ra-06 and Ra-01 / 02 in standby mode so much
A:Ra-01 and Ra-02 have substrate current, Ra-06 has been improved from the original
Q:Can Ra-06 work with LoRaWAN gateway Is Ra-06 only capable of point-to-point transmission
A:Can not be used together. Ra-06 can be used for point-to-point communication, or use a Ra-06 as a gateway.
Weight | 0.002 kg |
---|
Customers Also Viewed
Geekwrom HD 3.5 inch TFT Display Shield 800×480 for Raspberry Pi 3B 2B + Acrylic Matching Case Kit
$121.30Raspberry Pi & Orange PiAdd to cartGeekwrom HD 3.5 Inch TFT Display Shield 800×480 For Raspberry Pi 3B 2B + Acrylic Matching Case KitHD 3.5 Inch TFT Display Shield 800×480 For Raspberry Pi 3B 2BFeatures– Demensions:85mm*56.5mm;– Resolution:800 x 480, 3.5 inch;– 267ppi High PPI display screen;– 11ms High Response Time(more than 60 fps);– 160° Wide Viewing Angle;– 900:1 High Contrast Ratio;– …
intelligent Screen Solar Pure Sine Wave Power inverter 1200W-6000W DC To AC 110V 120V Converter
$121.49InvertersAdd to cartWatt 1200W Voltage 12V Type Single digital display / Watt 2200W Voltage 12V Type Single digital display / Watt 3000W Voltage 12V Type Single digital display / Watt 3000W Voltage 24V Type Single digital display / Watt 3000W Voltage 48V Type Single digital displ
500W Aquarium Submersible Stainless Steel Heating Rod Adjustable Heater
$48.59Solar CollectorsAdd to cartDescriptionMaterial:Stainless SteelColor:SilverPlug:US PlugVoltage:220-240V 50HzWattage:500WTemperature range:16-32°CCable Length:120cm/47.24inch(appr.)Heating Rod Length:41cm/16.14inch(appr.)FeaturesMade of stainless steel material, anti-rust, useful and durable.Double insulation & waterproof.Keep the water temperature steady.Suitable for aquarium:500L (for reference only).Simple adjustment and easy to read temperature indicator.Easy to install with 2 strong suckers (mounting distance of 2 suckers is about 9.5cm).Adjustment knob allows you to adjust the …
500W Aquarium Submersible Stainless Steel Heating Rod Adjustable HeaterRead More
5pcs JoyStick Module Shield 2.54mm 5 pin Biaxial Buttons Rocker for PS2 Joystick Game Controller Sensor
$14.30Other Module BoardAdd to cartFeaturejoystick joysticks standard interface module electronic building blocks and 2.54mm pin interface leads.Phillips is a two-way rocker 10K resistor, with the joystick in a different direction, tap the resistance vary. This module uses a 5V supply, the original state X, Y readout voltage of 2.5V or so, when pressed with the direction of the arrow, …
4Pcs Geekcreit Ultrasonic Module HC-SR04 Distance Measuring Ranging Transducers Sensor DC 5V 2-450cm
$9.83Sensor & Detector ModuleAdd to cartDescriptionWorking Voltage:5V(DC)Static Current:Less than 2mA.Output Signal:Electric frequency signal, high level 5V, low level 0V.Sensor Angle:Not more than 15 degrees.Detection Distance:2cm-450cm.High Precision:Up to 0.3cmInput Trigger Signal:10us TTL impulseSignal:output TTL PWL signalMode of connectionVCCtrig(T)ech0(R)GNDUse MethodSupply module with 5V, the output will be 5V while obstacle in range, or 0V if not.The out pin of this module is …
1MHz-700MHZ 3.2W HF VHF UHF FM Transmitter RF Power Amplifier for Ham Radio
$50.29RF amplifierAdd to cartApplicationBroadband RF power amplifier for all types of wireless applications, FM shortwave radios remote control toys, digital radio, etc., enter 1 milliwatt (0DBM) maximum output of 3 watts, 15V voltage supply, broadband work 1MHZ to 700MHZ can be work. As a result of well-designed, low end that can reach 35DBM (3W), at 500M, the output …
1MHz-700MHZ 3.2W HF VHF UHF FM Transmitter RF Power Amplifier for Ham RadioRead More
Reviews
There are no reviews yet.