SX1278 Ra-06 LoRa WIFI Wireless Module Spread Spectrum Communication 433MHz Wireless Serial Port UART interface
$14.82
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
Ra-06 Lora module is an embedded wireless data transmission module based on Lora spread spectrum technology. It uses the LoRa network to provide users with wireless data transmission functions. Supports point-to-point communication protocol, serial port transparent transmission communication, private protocol and ad hoc network protocol of loRa gateway.
The Ra-06 LoRa module has built-in SX1276 and Huada ultra-low power 32-bit cortex M0 + core MCU, 8K RAM, 64K FLASH. Runs a private networking protocol that can be independently developed by Anxin (LoraWan is not supported). Supports RTC wake-up and external pin interrupt wake-up under deep sleep. Various parameters such as serial port speed, transmit power, air speed, working mode can be modified online by AT instruction.
The wireless communication part of the Ra-06 LoRa module is based on Semtech SX1276 / SX1278’s LoRa spread-spectrum modulation technology. It has ultra-high receiving sensitivity and strong anti-interference ability. It adopts efficient forward error correction coding technology and has a very low bit error rate. And long-term stable data transmission capabilities. Modules and gateways run a star-shaped ad hoc network protocol that Anxin can independently develop. After the module is powered on, it can automatically find and join the gateway. There are three operation modes to choose to join the gateway.
Function
Frequency hopping communication, you can customize the frequency hopping list, select a frequency according to the frequency list for frequency hopping. Channel detection, channel avoidance, the module performs channel activity detection before sending data, and immediately delays avoidance after interference is found. Packet filtering based on the address set by the module. If the address does not match, the packet is not received. Set the network number, and the module communicates in groups. Wake-in-air technology.
Parameter
Voltage:1.8-3.6V
Current:Low power operation (standby)
Deep sleep
Deep sleep + timer work
Communication frequency:410MHZ-525MHZ
Transmission power:2-20dBm
Working temperature:-40 ~ + 85 degree
Storage temperature:-40 ~ + 90 degree
Operating humidity:10 ~ 90% RH (non-condensing)
Storage humidity:10 ~ 90% RH (non-condensing)
Communication distance:> 5km
Package included
1 x Wireless Module
Module software configuration
PC connection module serial port RX0, TX0. The default model rate is 9600, stop bit 1, even parity.
Module operation mode
When the module is powered on, it automatically enters the low-power operation mode. When the CPU is idle, it automatically shuts down, but the peripheral and IO ports are unchanged. Serial input AT command can wake up the CPU immediately, respond and process the command. After the task is processed, the CPU goes to sleep.
Try to enter a low-power sleep state when the CPU is idle. Low current operation is less than 350uA. Enter the command to enter deep sleep mode:AT + MODE = 1, at this time the power consumption reaches the minimum, and the current is 0.7uA. At this time, the timer is turned off, the module cannot perform any work, and the wake-up method:input arbitrary data into the serial port. AT + MODE = 2000, the module enters deep sleep mode, but when the timer is turned on, it will automatically wake up after 2000 milliseconds. At this time, the module current is 1uA. Can also actively wake up:input arbitrary data to the serial port.
Frequently Asked Questions
Q:What is Ra-06 interface, SPI or UART
A:Ra-06 is UART interface, Ra-01 & Ra-02 is SPI interface
Q:Can the MCU in Ra-06 be used to develop sensors
A:Temporarily does not support secondary development
Q:Can Ra-06 communicate with Ra-01
A:As long as the parameter settings of the two are correct, they can communicate with each other.
Q:Why is the power consumption difference between Ra-06 and Ra-01 / 02 in standby mode so much
A:Ra-01 and Ra-02 have substrate current, Ra-06 has been improved from the original
Q:Can Ra-06 work with LoRaWAN gateway Is Ra-06 only capable of point-to-point transmission
A:Can not be used together. Ra-06 can be used for point-to-point communication, or use a Ra-06 as a gateway.
Weight | 0.002 kg |
---|
Customers Also Viewed
5pcs 1206B 3A PWM DC Motor Speed Controller 6V/12V/24V Speed Regulating Switch Electronic Governor Dimmer
$39.45Motor PWM Speed ControllerAdd to cartDescriptionModel:1206BKVoltage:12VPower mode:DC powerVoltage range:DC 6V-28VCurrent range:Within 3ASwitch function:YesSize:57mm*37mmPackage Included5 x Motor Speed Governor
100W 18V High Efficieny Solar Panel USB DC Monocrystalline Solar Charger for Car RV Boat Battery Charger Waterproof
$105.29Solar PanelAdd to cartFeature– Suitable for campers, boats, houses, gardens, shacks or farms– Provide appropriate power for TVs, laptops, lights, refrigerators and other operating equipment.– Flexible board, lightweight and easy to install.– Suitable for RVs, boats, small spaces or crowded areas.SpecificationSolar panelMaterial:Monocrystalline SiliconSize:510x280x3.0mm/20.08×11.02×0.12inPower:100WOpen Circuit Voltage:18VShort circuit current:2AOutput Voltage:DC 18V&9V, USB 5V, Type-C 5VWaterproof grade:IP65Conversion:23-24%Applicable to:Bicycle, mountaineering, hiking, camping, …
CJMCU-219 INA219 I2C Bi-directional Current Power Monitor Sensor Module
$13.11Sensor & Detector ModuleAdd to cartDescriptionCJMCU-219 module is a with I2C interface Bidirectional current / power monitor integrated circuit (IC), and further expand the energy-saving electronic products TI camp. INA219 with the industry’s highest accuracy and smallest size, not only to monitor the voltage drop across a shunt resistor on the sensing shunt supply voltage, while also computing power. The …
CJMCU-219 INA219 I2C Bi-directional Current Power Monitor Sensor ModuleRead More
Reviews
There are no reviews yet.