01Studio PyWiFi- ESP32P 8M RAM MicroPython LVGL IOT WIFI Learning Development Board
$37.38
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
pyWiFi-ESP32P is designed by O1Studio, which based on ESPe32 platform, its interface is compatible with pyboard. Compared with pyWiFi-ESP3, the pyWiFi-ESP32P built-in 8MB PSRAM, GPIO 16,17 were used to control PSRAM. And the main features are as follows
Compatible with pyboard interface
Auto download circuit.
Lithium battery input interface and charging circuit
Buttons and LEDs are arranged neatly and overlay is clear.
Specification
V+3.6V – 6V power input (supplied by USB when USB connected)
3V3regulated 3.3v output only, max 300mA
VBATFET protected supply battery input
LEDConnect to Pin “2”
KEYConnect to Pin “0”
I2CMost GPIO (Software simulation)
PWMMost GPIO
Package included
1 x Development Board
Weight | 0.031 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.