TAS5630 High Power Digital Power Amplifier Board Deluxe Edition 300W+300W Home Digital Power Amplifier Board
$136.15
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
OPA1632 is a fully differential amplifier used to drive high-performance audio analog-to-digital conversions (ADCs). The highest audio quality, it provides very low noise and output driver, this application is optimized for the characteristics of OPA1632 Excellent gain bandwidth of 180MHz 50V/┢s and very fast slew rate, resulting in very low distortion of 0.000022%. Very low input noise of 1.3nV/£Hz further ensures the maximum signal-to-noise ratio and dynamic range. Fully differential The flexibility of the structure makes it easy to achieve single-ended fully differential output conversion. The differential output reduces even harmonics and reduces common mode noise interference.
OPA1632 provides ADCs with excellent performance and high-performance audio PCM1804. The driver, such as the shutdown function during use, is also enhanced. To increase the flexibility of the amplifier. TI’s TAS5630 is a 300W stereo (total power 600W) class D amplifier with integrated feedback analog input, which can provide up to 300W stereo from a single power supply of 50V to a 4 ohm speaker, with a traditional class AB amplifier Performance (
Features
1. Use original TAS5630, OPA1632DR
2. The main filter electrolytic capacitor adopts a capacity of 470UF/100V*4
3. The resistance uses five-ring metal resistors, and the main circuit uses five-ring metal film resistors with an accuracy of ÷1% to ensure a good signal-to-noise ratio of the whole machine.
4. Fully shielded high-current inductors are used to ensure a clear and powerful sound.
5. The PCB adopts 1.6mm thick double-sided board, 2.0 oz copper thickness, and the whole process of spraying tin to ensure good passing performance of large and small currents. First-class PCB quality.
Basic parameters
1. Working method:Class D
2. Quiescent current:65mA
3. Work efficiency:88%
4. Output power:2*300W/4 ohm 10% THD
5. Frequency response:20Hz to 20KHz
6. Dynamic range:>100 dB
7. Signal to noise ratio:100dB(A-Weighted)
8. Working voltage:DC40-48V
9. PCB size:140*95MM
Package included
1 x Digital Power Amplifier Board
Weight | 0.4 kg |
---|
Customers Also Viewed
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water Heater
$21.87Laboratory Heating EquipmentsAdd to cartDC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterSpecificationsModel:SSG-2Type:Normally ClosedMaterials:Plastic & CopperDimension:83*90*49cmPipe Inside Diameter:1/2 inchNet Weight:(approx.) 190gFeaturesThis is a DC12V solenoid valve usually used for solar water heater.It can work with water from 1 to 100℃ (or some other liquid).Working Voltage Range:Rated Voltage ±10%Working Water Pressure:0.02 to 0.8MpaThe working water pressure would be too low/high to …
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterRead More
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set Kit
$76.17Terminal BlocksAdd to cartDescription650 Pcs Assorted Ring Insulated Electrical Wire Terminals Crimp Connector Set KitSpecificationQuantity:650PcsMaterial:Copper + PVC+ TinplateInsulated crimp terminals.All are enclosed in plastic case for easy access.The assorted crimp terminals is including50 x Ring M3 Red50 x Ring M4 Red50 x Ring M5 Red50 x Ring M6 Red50 x Ring M8 Red50 x Ring M4 Blue50 x …
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set KitRead More
3.5 inch Protective Enclosure Case Support Dispaly Screen or Cooling Fan for Raspberry Pi
$9.26Raspberry Pi & Orange PiAdd to cartFeatures– Fully updated for Raspberry Pi 3B+/3B/2B– Can support 3.5 inch screen or cooling fan (notes:can not assemble them at the same time)– Heat sink openings for both CPU and LAN chip– High-gloss finish, surface mountableSpecificationsColor:BlackMaterial:ABSSuitable for Raspberry Pi 3B+/3B/2BWeight:45gSize:9cm*6.2cm*3.4cmPackage Included1x ABS Case4x Non-slip mat4x Screws
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module for
$47.25DIY Electronic KitsAdd to cartDescription1. Use TM1650 (compatible with AIP650) digital tube driver chip, support 8-level brightness adjustment, working voltage 3.3V ~ 5.5V2. IIC interface, only need 2 ordinary IO can drive, do not need to repeat scanning of MCU, saving MCU resources.3. 4 digit 0.56 inch red common negative digital tube with decimal point.4. 0.56 inch with four …
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module forRead More
WEAH-81 Car Heavy Bass Frequency Divider High and Low 2-way 2 Bass Crossover Upgrade Tool
$33.09Amplifier BoardAdd to cartFeatureBrand:WEAHModel:81Power:100WApplicable impedance:4-8ohmFrequency response:100Hz ~ 45HzDimensions:133 x 95 x 44mmApplication environment:Car or home speaker DIYPackage includes1 x Bass Frequency DividerHow to Wire:
5pcs 8-36W intelligent Sensor LED Ceiling Light And Sound Control Power Supply Module Bulb Panel Light Built-in Power Driver
$21.42Power Supply ModuleAdd to cartDescriptionInput Voltage:AC185-265VOutput Current:0.22AOutput Voltage:24-108VEfficiency:90%Working Frequency:50/60HZOutput Power:8-24WSound Control:50-75dBLight control:7-20LuxDiameter:25.8mmFeature1. The combination of sound and light control, when the light is strong, does not work, the light intensity is lower than 12-15LUX, and the sound of the induction 27-36DB starts automatically.2. Delay 40-60S automatically extinguished, easy to install, compatible with ordinary switches, no additional wiring.3. Single trigger, …
Reviews
There are no reviews yet.