Hiland UNO DIY Kit Build Your Own Uno Board Compatible with Arduino Uno Motherboard
$15.30
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
Now, you can build your own Uno development board through a simple production process!
Compatible with Arduino Uno motherboard, using the original ATMEGA328P-U as the main control chip, and the original CH340C as the USB to TTL driver chip. It is very stable under WINXP, WIN7, WIN8, and WIN10 systems! The win10 system can automatically install the driver. WinXP, win7, win8 need to manually install the driver (CH341SER.EXE file in the attachment), or use the driver wizard to install it automatically.
The kit has already burned the Uno bootloader program and the Blink test program. You only need to solder and assemble it correctly. After the soldering is completed, power on, and the LED marked L will turn on and off at one-second intervals, and you can start exploring the magic with Arduino Uno board.
Use a MINI USB cable for power supply and communication. After the production is completed, connect the motherboard to the computer, install the CH340 driver, open the IDE (you can download it on the website), select the corresponding port (COM), and select the type of development board Uno, you can upload programs through the USB interface, and the TX and RX indicator lights will flash during upload.
Driver:Click here.
Production suggestion
1. It is recommended to use a pointed soldering iron for soldering, because the package contains chip ICs, and certain soldering experience is required.
2. Operate as short as possible when soldering the LED to avoid high temperature damage to the LED.
3. Soldering the CH340C first, and then solder other components.
Development board size:80*36mm
Installation hole distance:72.6*27.9mm
Interface form:MINI-USB (communication and power supply), ICSP
Package included
1 x Uno DIY Kit
Weight | 0.027 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.