AOQDQDQD Module Sensor Kit for Arduino with 0.96 OLED 1602 LCD Display Relay Servo Motor DHT11 for Starter Projects
$37.75
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
Module sensor starter kit for Arduino Raspberry Pi
0.96” OLED:Made of 128×64 individual Yellow Blue OLED pixels.SSD1306 Driver Chip,controlled by I2C only need 2 wires.
1602 LCD:White Blue with adjustable Backlight,display 2×16 characters.With Adapter Board,only need 4 I/O ports can control it.
Touch Sensor:Touch it turns on,release it turns off.
Obstacle Avoidance Module:used in robot obstacle avoidance,line count,black white line tracking.
8×8 Red Dot Matrix Display:used to display characters and graphics,simple to control
1 Channel Relay Module:Controlled by 5V digital output from microcontrolle,With power and relay action indicator.used as home appliance control.
PIR Motion Sensor:Human body sensor lighting industrial automation and control, etc.
SG90 9G Servo Motor:Applied to remote control helicopters, micro robot,and boats. For All kind of R/C Toys and for Arduino experiments.
DHT11:Digital temperature and humidity sensor is a digital signal output with a calibrated temperature and humidity combined sensor
Soil Moisture Sensor:Most sensitive to ambient humidity is generally used to detect moisture of soil.
JoyStick Module:2-axis pushbutton rocker module by joystick potentiometer with (X, Y) 2 axis analog output, (Z) 1 button digital output.
Red LED Digital Tube:Common Anode;Digital Display:4 Digit;4 Bit 7 Segment;
Ultrasonic Distance Sensor:Using IO trigger for at least 10us high level signal, When triggered it sends out a series of 40KHz ultrasonic pulses and receives echo from an object
Package included
1 x 0.96 inch OLED Screen
1 x 1602 Liquid Crystal Display Module
1 x 1-Channel Relay Module
1 x DHT11 temperature and humidity sensor
1 x HC-SR04 Ultrasonic sensor
1 x 8×8 Dot Matrix Display
1 x JoyStick Module
1 x 4-digit Digital Tube
1 x TTP223B Touch sensor
1 x HC-SR501 Infrared sensor
1 x Soil Moisture Sensor
1 x Obstacle Avoidance Sensor
1 x SG90 9G Servo Motor
2 x Bread Board
20 x Diode(red)
30 x Resistance(220 1K 10K ┯)
20 x DuPont Cable(male to female)
Weight | 0.257 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.