3pcs JDY-10 bluetooth 4.0 Module BLE bluetooth Serial Port Module Compatible with CC2541 Slave
$16.47
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
Model:JDY-10 bluetooth 4.0 slave module
Kernel:M0
Communication interface:serial port
Working voltage:1.9-3.6V
Communication distance:100 meters
Working current:90ua
Suspen mode:14 uA
Module is:bluetooth 4.0 slave
JDY-10 transparent transmission module is based on bluetooth 4.0 protocol standard, working frequency range is 2.4GHZ range, modulation mode is GFSK, maximum transmission power is 8db, maximum transmission distance is 80 meters, low power consumption, small size, strong signal, data transmission Stable and other characteristics.
Features
1:Support Android, IOS mobile phone data penetration
2:Support low power consumption (standby current can reach several uA)
3:Support GPIO and UART peripheral interface
4:Support AT command operation
5:Can be certified by FCC/CE and other standards
Product application range
1:bluetooth LED lighting
2:Motor adjustment and other products
3:Anti-lost alarm and other products
4:Sports Health Care
5:Small appliances
6:Automotive Electronics
Technical specifications
Type:Specifications
Working voltage:1.9 – 3.6V
Operating temperature:-40 – 85°C
Maximum transmit power:+8dbm
Antenna:PCB onboard antenna
Receiving sensitivity:-92dbm
Average current:Wake mode:90uA
Suspen mode:14 uA
Deep Sleep mode:1uA
Factory default configuration
Service UUID:FFE0
Feature UUID:FFE1
Serial port baud rate:115200bps
AT instruction set
Users can communicate with the bluetooth chip through the serial port. The serial port uses Tx, Rx two signal lines, and the baud rate is supported.
Hold 2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200. The default baud rate of the serial port is 115200bps.
Instruction set details
(Note:You must enter and enter the line when you send the AT command. The AT command can only take effect when the module is not connected. Once the blue is enabled.
When the tooth module is connected to the device, the bluetooth module enters the data transparent transmission mode)
Detailed instructions
(AT commands are case sensitive and end with carriage return, newline characters:rn)
1. Get the version number
command:response:parameter
AT+VER:+:Param:version
Default:+JDY-10-V1.8
2. Get the bluetooth MA C address
command:response:parameter
AT+MA C:+MA C::Param:MA C address
3. Set the bluetooth name
command:response:parameter
AT+NAME:OK:Param:bluetooth name
Default name:JDY-10
Up to 18 bytes
4. Set / query – transmit power
command:response:parameter
AT+POWE
AT+POWE:OK
+POWE:Param:(0-5)
0:8db
1:5db
2:0db
3:-5db
4:-10db
5:-13db
5. Set / query – serial port baud rate
command:response:parameter
AT+BAUD:OK:Param:(0-7)
0:115200 bps
1:57600 bps
2:38400 bps
3:19200 bps
4:14400 bps
5:9600 bps
6:4800 bps
7:2400 bps
AT+BAUD:+BAUD
6. Set / query – broadcast interval
command:response:Parameter
AT+ADVINT:OK:Param:(0-6)
0:100ms
1:100ms
2:250ms
3:500ms
4:1600ms
5:3200ms
6:4800ms
AT+ADVINT:+ADVINT
Package included
3 x JDY-10 bluetooth 4.0 Module
Weight | 0.036 kg |
---|
Customers Also Viewed
OpenMV OpenMV3 4 2 Camera Module M7 H7 LCD Expansion Board Display Screen Module
$50.02Display ScreenAdd to cartnullFeatureThe LCD Shield gives your OpenMV Cam the ability to display what it sees on-the-go while not connected to your computer. It features a 1.8inch 128×160 16-bpp (RGB565) TFT LCD display with a controllable backlight. Your OpenMV Cam’s firmware has built-in support for controlling the LCD Shield using the LCD module.ApplicationsThe LCD Shield is great …
OpenMV OpenMV3 4 2 Camera Module M7 H7 LCD Expansion Board Display Screen ModuleRead More
3pcs MFRC-522 RC522 RFID RF IC Card Reader Sensor Module Solder 8P Socket
$10.96Sensor & Detector ModuleAdd to cartIntroduction to the RFID moduleThe MF522-AN module adopts MFRC522 original chip design card reader circuit, which is easy to use and low in cost. It is suitable for users of advanced applications such as device development and card reader development, and users who need to design/produce RF card terminals. This module can be directly loaded …
3pcs MFRC-522 RC522 RFID RF IC Card Reader Sensor Module Solder 8P SocketRead More
Transparent Acrylic Sheet Housing Module Case for DSO138 Oscilloscope
$17.48DIY Electronic KitsAdd to cartFeatureThis product is for DSO138 Oscilloscope only. (Product ID:984002, 969762)Color:TransparentMaterial:AcrylicInstallation size:12.7 x 8.7 x 2.6 (L*W*H)Note:Package does not includes the DSO138 Oscilloscope.Instruction:Click to openPackage includes1 x DSO138 Transparent Acrylic Sheet
20Pcs 3V 650nM 5mW Line Laser Diode Module
$41.34Module ComponentsAdd to cartDescriptionSpot mode:line(Continuous output)Dimensions:diameter 9mm x length 23mmLaser working life:5000-10000 hours or moreLaser wavelength:650nmOutput power:5mWOperating voltage:DC3VWorking current:16mA ~ 20mAWorking temperature:-36 → ~ 65 →Storage temperature:-36 → ~ 65 →Level:sub-industrial gradeColor:red lightMaterial:brassApplication(1) industrial grade:can be used for equipment, health care, military, Kam pseudo security, stage lighting, tools, U disk, mobile phone, projection teaching flip pen, warm measuring …
MMDVM Open-Source Multi-Mode Digital Voice Modem DIY Kit Expansion Board for Raspberry Pi
$103.03Raspberry Pi & Orange PiAdd to cartDescription– This board could cooperate Raspberry Pi , Orange Pi, a variety of school development board to use.– Board has been applied in the GM300 GM3188 3688 950I 338 Vitex DR-1X, other types of repeaters and car stations need to be studied yourself.– The MMDVM is intended to be an open-source Multi-Mode Digital Voice Modem,which …
MMDVM Open-Source Multi-Mode Digital Voice Modem DIY Kit Expansion Board for Raspberry PiRead More
3Pcs 5V-30V DC PWM Speed Controller Mini Electrical Motor Control Switch LED Dimmer Module
$10.04Other Module BoardAdd to cartFeaturePWM DC motor speed controller is a very safe product.When the situation is overcurrent, it will disconnect by itself. after cooling off a few seconds, the fuse will recovery automatically.With high voltage and high current resettable fuseMini but usefulSpecificationOperating voltage:DC 5-30VControl power:90W (maximum)Quiescent current:0.015A (standby)PWM duty cycle:1% -100%PWM frequency:10khzSize:29mm*23mm (excluding handles)Total height:15mmKnob color:Send randomlyPackage included3 …
3Pcs 5V-30V DC PWM Speed Controller Mini Electrical Motor Control Switch LED Dimmer ModuleRead More
Reviews
There are no reviews yet.