10pcs JDY-10 bluetooth 4.0 Module BLE bluetooth Serial Port Module Compatible with CC2541 Slave
$47.34
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
Model:JDY-10 bluetooth 4.0 slave module
Kernel:M0
Communication interface:serial port
Working voltage:1.9-3.6V
Communication distance:100 meters
Working current:90ua
Suspen mode:14 uA
Module is:bluetooth 4.0 slave
JDY-10 transparent transmission module is based on bluetooth 4.0 protocol standard, working frequency range is 2.4GHZ range, modulation mode is GFSK, maximum transmission power is 8db, maximum transmission distance is 80 meters, low power consumption, small size, strong signal, data transmission Stable and other characteristics.
Features
1:Support Android, IOS mobile phone data penetration
2:Support low power consumption (standby current can reach several uA)
3:Support GPIO and UART peripheral interface
4:Support AT command operation
5:Can be certified by FCC/CE and other standards
Product application range
1:bluetooth LED lighting
2:Motor adjustment and other products
3:Anti-lost alarm and other products
4:Sports Health Care
5:Small appliances
6:Automotive Electronics
Technical specifications
Type:Specifications
Working voltage:1.9 – 3.6V
Operating temperature:-40 – 85°C
Maximum transmit power:+8dbm
Antenna:PCB onboard antenna
Receiving sensitivity:-92dbm
Average current:Wake mode:90uA
Suspen mode:14 uA
Deep Sleep mode:1uA
Factory default configuration
Service UUID:FFE0
Feature UUID:FFE1
Serial port baud rate:115200bps
AT instruction set
Users can communicate with the bluetooth chip through the serial port. The serial port uses Tx, Rx two signal lines, and the baud rate is supported.
Hold 2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200. The default baud rate of the serial port is 115200bps.
Instruction set details
(Note:You must enter and enter the line when you send the AT command. The AT command can only take effect when the module is not connected. Once the blue is enabled.
When the tooth module is connected to the device, the bluetooth module enters the data transparent transmission mode)
Detailed instructions
(AT commands are case sensitive and end with carriage return, newline characters:rn)
1. Get the version number
command:response:parameter
AT+VER:+:Param:version
Default:+JDY-10-V1.8
2. Get the bluetooth MA C address
command:response:parameter
AT+MA C:+MA C::Param:MA C address
3. Set the bluetooth name
command:response:parameter
AT+NAME:OK:Param:bluetooth name
Default name:JDY-10
Up to 18 bytes
4. Set / query – transmit power
command:response:parameter
AT+POWE
AT+POWE:OK
+POWE:Param:(0-5)
0:8db
1:5db
2:0db
3:-5db
4:-10db
5:-13db
5. Set / query – serial port baud rate
command:response:parameter
AT+BAUD:OK:Param:(0-7)
0:115200 bps
1:57600 bps
2:38400 bps
3:19200 bps
4:14400 bps
5:9600 bps
6:4800 bps
7:2400 bps
AT+BAUD:+BAUD
6. Set / query – broadcast interval
command:response:Parameter
AT+ADVINT:OK:Param:(0-6)
0:100ms
1:100ms
2:250ms
3:500ms
4:1600ms
5:3200ms
6:4800ms
AT+ADVINT:+ADVINT
Package included
10 x JDY-10 bluetooth 4.0 Module
Weight | 0.12 kg |
---|
Customers Also Viewed
LILYGO TTGO T-Watch SIM800L Bottom Programable PCB Expansion Board for Smart Box Development
$27.49Expansion Board & ShieldAdd to cartFeaturesDevelopment platform:ESP-IDF (native SDK), , Lua, MicroPython, ScratchSupport SIM card mobile communication functionSupport microphoneSupport voiceSupport for scalable module useCode:Click here to openESP32:Characteristic:DescriptionGPIO05:CS:Screen, TFT_CSGPIO18:SCLK:Screen, TFT_SCLKGPIO19:MOSI:Screen, TFT_MOSIGPIO27:DC:Screen, TFT_DCGPIO12:BL:Screen, TFT_BLESP32:Characteristic:DescriptionGPIO33:TX:SIM Card, UART_SIM_TXGPIO34:RX:SIM Card, UART_SIM_RXGPIO14:RST:SIM Card, SIM_RSTGPIO15:PWKEY:SIM Card, SIM_PWKEYGPIO04:BOOST:SIM Card, SIM_BOOST_CTRLPackage includes1 x T-Watch SIM800L PCB backplane1 x AntennaWiring with the T-watch box, for reference only, the T-watch does …
50 Pieces Fountain Pens Holder Wooden Pen Display Case with Antique Color Container 5 Layer
$278.83PhysicsAdd to cartSpecificationsColor:ArchaizeMaterial:Wood Box + Plexiglass CoverSize(L x W x H):about 270*200*245mm[Conversion:1mm=0.03937 inch, 1inch=25.4 mm]Features-Large pen cases, 50 mounted large-capacity, generous and practical design.-Wood box and beige color flannel inside, clear and elegant.-Durable without deformation, glass shatterproof, can be clearly seen.Package Included1 PCS x Wooden Pen Case(Pen not included)Note-Due to different producing batches, product details might be …
50 Pieces Fountain Pens Holder Wooden Pen Display Case with Antique Color Container 5 LayerRead More
220V 700W Powered Portable Electric Air Space Heater Fast Heating thermostat Hot
$58.71Solar CollectorsAdd to cartFeatures-The popular choice for heating bathrooms as well as kitchens.-Overheat protect.-Adjustable thermostat.-Handy carry handle.-Easy to adjust manual controls.-Anti-fire safety protection and are simple to install.Specification-Size:260mm*95mm*160mm-Rated voltage:220V-Colour:White-Rated power:700W-Mode of operation:mechanical-Rated power:700w-Switch type:knob type-Applicable area:21-30m2Package list-1x electric heater
50PCS 5ml Plastic Sample Small Bottle Vial Storage Container Test Tube for Lab
$24.29Bottles & JarsAdd to cartDescription50PCS 5ml Plastic Test Tube Centrifuge Tubes Bottle With Cap For Lab Supplies,Used to plug a flask or testtube for safe keeping. Test Tube. Used to mix, heat, or store substances.SpecificationMaterial:PPContain:5mlWeight:100g(50PCS)Color:TransparentQuantity:50pcsDiameter:14mmHeight:42mmFeatures1.Plastic cryogenic vial.2.Made from PP with good temperature resistance and sealing property.3.Various capacity with clear scale marked,easy to use.4.Self stnading design,no slide when using.5.Smooth side …
50PCS 5ml Plastic Sample Small Bottle Vial Storage Container Test Tube for LabRead More
3pcs 40W DC-AC inverter Power Supply 12V Liter 220V Step Up Transformer Boost Module Support in Parallel
$20.68Power Supply ModuleAdd to cartFeature1. Output DC and AC dual output, can output DC and AC voltage, fully compatible with all kinds of electric appliances2. Without connecting wires, you need to solder the input and output wires yourself.3. Instructions for use:This product can convert the DC power of 8V-13V battery into 220V AC power for household use, and DC …
45Pcs Solar intelligent Watering Timer Automatic Drip Irrigation + 10M Hose + Solar Panel + Copper Filter Nozzle
$109.34Electrical Relay & TimersAdd to cartFeatures> IP67 Waterproof> Indoor or oytdoor use.> Use clean water only.> Automatic water your plants and flowers precisely and at ease.> Reduce water by 70% over traditional sprinklers by focusing water directly to the root.> Flowers, plants, bonsai and potted fruit, for family homes, hotels, clubs, offices and other plants of intelligent care.> Watering the …
10Pcs 3W 5V LED Module Board High Power Module
$26.08LED BoardAdd to cartFeatureColor temperature:Warm White 3000-3200K / white 6000-6500KForward current:700MALuminous flux:White 180-200LM (lumens) , Red 90-100LM (lumens) , Green 80-90LM (lumens)Forward voltage:3.3 – 3.6 VReverse voltage:5VPower:3WViewing angle:180Working temperature:-20 to 60Storage temperature:20 to 60test cod (Click here)Package included10 x LED module
Reviews
There are no reviews yet.