Assembled 16 Level Sound Control Level indicator Blue LED Mono VU Meter Audio Music Spectrum Board AGC for MP3 Speaker Amplifiers DIY
$72.16
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
Microphone signal acquisition, added noise cancellation function + automatic gain control. Practical effect is better.
Tips
1. The power supply voltage must be 5V. Do not exceed 5V. Otherwise, the lamp board will be damaged.
2. Power supplies with currents greater than 150MA (0.15A) can be used, no matter how large. All right,
3. Some power supplies have fast charge high voltage output function, please do not use this type of charger.
4. The product does not have a power supply, no power cord.
How to use
Sound Control Level indicator operating instructions
Featrues
By micophone pickup (Sound Control)
Aluminum alloy integrated molding housing 181×16 x 18.5 mm.
Mono 16 segment square lights to ensure adequate dynamic range and shock enough.
Exclusive custom square rounded lights strip. (There are no similar lights in the market).
The rising speed and the falling speed of the light bar, the holding time and the falling speed of the peak can be adjusted separately.
The brightness of the lamp can be adjusted freely. Microphone sensitivity can be adjusted 15 levels.
The reaction speed of AGC can be adjusted 15 levels.
super wide range of AGC adaptive algorithm to ensure the best effect.. Single button operation.
Exclusive Software – the function of eliminating ambient noise . Specific operation:(There are LED instructions operating time)
Normal mode
1. 1 second – Mode switch (there will be a corresponding preview).
2. 5 seconds – Enter the speed setting mode.
3. 10 seconds – Factory default
4. Double Click – The function of eliminating ambient noise is turned off.
5.Three Click – The function of eliminating ambient noise is turned on.
After keeping quiet, the recognition was completed in a few seconds.
6. Four Click – Enter sensitivity setting mode(15 optional)
7. Five Click – Enter the AGC speed setting mode(15 optional)
8. Six Click – Adjust the brightness of the light bar,low/medium/high
Speed setting mode:(In normal mode, press the button for 5 seconds to enter, press the button for 5 seconds to exit) .
1. 1 second
a. The rising speed of the light bar (15 optional)
b. The falling speed of the light bar (15 optional)
c. The holding time of the peak (15 optional)
d. The falling speed of the peak (15 optional)
e. Brightness adjustment (15 optional)
Loop in these functions.
2. Click the button – Loop to change the parameters set.
I. Environmental noise can be eliminated:(In normal mode ,three-click button opens and automatically exits after recognition)
(Special description:Evey environment has different environmental noise,Because it’s the microphone that picks up the sound,and the microphone can’t recognize noise or music,So we need to eliminate environmental noise. Then the sound reflected by the level lamp is the real sound of music. Before making this correction,make sure you don’t play music or talk ,the whole process will be completed in 5 seconds,so that the current environmental noise can be recognized.It is suggested that correction should be made once for every change of environment.)
Sensitivity setting mode:(In normal mode, Four Click to enter,No click 5 seconds to exit.)
1. Single -Click – Sensitivity is reduced(The more lights light on the indicator ,The sensitivity will getting more lower (15 optional)).
2. Double-Click – Sensitivity increases(The less lights light on the indicator , The sensitivity will getting more higher (15 optional)).
NOTE
In order to achieve the best effect,it is suggested to lower the sensitivity when the signal amplitude is large,and in the case of small signal,the sensitivity can be increased.
AGC Speed Mode:(In normal mode, Five Click to enter,No click 5 seconds to exit.)
1. Single -Click – AGC speed reduced (The more lights light on the indicator,
The AGC speed will getting more slower(15 optional)).
2. Double-Click – AGC speed increases(The less lights light on the indicator,
The AGC speed will getting more faster (15 optional)).
NOTE
The principle of AGC is to enlarge the input small signal to full screen display, reduce the large signal to the range that the screen can display, and automatically scale the signal according to the size of the input signal.
The speed of the AGC is the speed at which the small signal is amplified to the full screen display. Because the input signal exceeds the display area, it will be compressed immediately. If it is used in an environment where the signal amplitude varies greatly, it is recommended that the AGC speed be adjusted to faster.)
Package included
1 x assembled 16 Level Sound Control Level Indicator
Weight | 0.119 kg |
---|
Customers Also Viewed
50A Maxi Car Fuse with Weatherproof Holder 8AWG (8B&S) Wire Dual Battery for Car
$18.35Module ComponentsAdd to cartSpecificationColor:Black + RedSpecs:50AWire Length:15 cm(8AWG)Features50 AMP Fuse is included.This product will withstand tough jobs.It is waterproof and very heavy duty in construction.This fuse kit is perfectly suited for projects involving:4WD, 4X4, Caravan, Dual Battery, Batteries, AC DC, 12-32 Volt.Package Included1 x Maxi Blade Fuse Holder (15cm 8AWG Wire Each Side)1 x 50 Amp Fuse
HX-2S-A10 2S 8.4V-9V 8A Li-ion 18650 Lithium Battery Charger Protection Board 8.4V Overcurrent Overcharge Overdischarge Protection
$4.36Battery Protection ModuleAdd to cartSpecificationsModel:HX- 2S-A10 Maximum working current:8AMaximum instantaneous current:16AStatic current:less than 10uA Resistance:less than 300 m Ω Charging voltage:7 V – 9VOvercharging range:4.25-4.35V plus or minus 0.05VOver voltage range:2.5-3.0V plus or minus 0.05 VWorking temperature:- 40 – + 50 →Storage conditions:- 40 – + 80 →Size:41 * 8 * 2.2 mm Short circuit protection:to protect and restore …
DL14S 14S 48V BMS Battery Protection Board 15A 20A 30A 40A 50A 60A Waterproof BMS for Rechargeable Lifepo4 Electric Charge Li Lipo NiCoMn ion Cells with Balance
$37.17Battery Protection ModuleAdd to cartCurrent 15A Type Common Port / Current 20A Type Common Port / Current 30A Type Common Port / Current 40A Type Common Port / Current 50A Type Common Port / Current 60A Type Common Port / Current 15A Type Separate Port / Current 20A Type Separate Port / Current 30A T
16V16.6F Automotive Rectifier Low Temperature Starter Super Farad Capacitor Module 2.7100F
$50.18Electronic Accessories & SuppliesAdd to cartFeaturesFast charge and discharge. Long life. Large capacity. High power density. Good low temperature characteristicsSpecificationBrand:GDCPHModel:16V16.6FSeries:Super capacitor (16V)Nominal capacity:16.6FTolerance:10 %Rated voltage:15-16 VOperating temperature range:- 40→~70→Lead spacing:120mmDimensions:120*62*20mm(Length *Height *Thickness)Height-installation (maximum):62mmInstallation type:weldingCase:Aluminum capacitorApplication scope:self-provided power supply, standby power supply, alternative power supply, mobile power supplyPackage included1 x 16V16.6F Super Farad Capacitor
HC-SR505 Mini infrared PIR Motion Sensor Precise infrared Detector Module
$6.55Sensor & Detector ModuleAdd to cartHC-SR505 Mini Infrared PIR Motion Sensor Precise Infrared Detector ModuleIntroductionHC-SR505 small body sensing module is based on infrared technology, automatic control products, high sensitivity, high reliability, ultra-small, ultra-low-voltage operation mode. Widely used in various auto-sensing of electrical equipment, especially battery-powered automatic control products.SpecificationSize:40 x 10 x 13mmNet weight:2gTechnical parameters1. Operating Voltage Range:DC4.5-20V2. Static current3. Output …
HC-SR505 Mini infrared PIR Motion Sensor Precise infrared Detector ModuleRead More
4 Blade Eco Friendly Heat Powered Wood Log Burner Fireplace Stove Fan Silent
$97.19Temperature ControllersAdd to cartFeatures– More efficient wood use – Use up to 28% less wood – Heat powered stove fan – increases the efficiency of your freestanding stove oven or wood / log burner to generate warmth economically– Eco-friendly and self-powered – a thermoelectric module acts as a small generator to power the fan’s motor– Operates automatically between …
4 Blade Eco Friendly Heat Powered Wood Log Burner Fireplace Stove Fan SilentRead More
15W Solar Charger Solar Power Panel Waterproof Folding Solar Panel Bag Solar Panel Charger
$66.81Solar PanelAdd to cartPackage Included1x 15W solar panel chargerSpecificationColor:BlackMaterial:Mono-crystalline Silicon+PET+ fabricExtended size:65*17*0.3cmFolded size:18.5* 11.5*2cmPower(MAX):15WMaximum Power Voltage (Vmp):5VMaximum Power Current (Imp):2ANumber of Cells:36pcsOutput:USB5VPackage:Neutral packagingCharging temperature:-20~70℃Waterproof:IP65Conversion rate:20%Application:security camera, laptops, car batteries, cars, coaches, ships, airplanes, satellites, space stations, outdoor farming, planting, tourism, solar street lights etcFeature– Durable and waterproof.– Light weight and thin shape can be stored more easier and …
15W Solar Charger Solar Power Panel Waterproof Folding Solar Panel Bag Solar Panel ChargerRead More
3pcs RX24 50W 100R 100RJ Metal Aluminum Case High Power Resistor Golden Metal Shell Case Heatsink Resistance Resistor
$9.36Electronic Accessories & SuppliesAdd to cartFeaturesIt has the characteristics of small size, high power and high precision.It is sealed by professional technology.It has the advantages of stronger heat resistance, higher temperature resistance, moisture resistance, high anti-vibration and explosion protection.Scope of application:Testing power supply, frequency converter, automobile LED lamp, automation equipment, audio, frequency divider, servo industry and other harsh industrial control …
Reviews
There are no reviews yet.