Assembled 16 Level Sound Control Level indicator Blue LED Mono VU Meter Audio Music Spectrum Board AGC for MP3 Speaker Amplifiers DIY
$72.16
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
Microphone signal acquisition, added noise cancellation function + automatic gain control. Practical effect is better.
Tips
1. The power supply voltage must be 5V. Do not exceed 5V. Otherwise, the lamp board will be damaged.
2. Power supplies with currents greater than 150MA (0.15A) can be used, no matter how large. All right,
3. Some power supplies have fast charge high voltage output function, please do not use this type of charger.
4. The product does not have a power supply, no power cord.
How to use
Sound Control Level indicator operating instructions
Featrues
By micophone pickup (Sound Control)
Aluminum alloy integrated molding housing 181×16 x 18.5 mm.
Mono 16 segment square lights to ensure adequate dynamic range and shock enough.
Exclusive custom square rounded lights strip. (There are no similar lights in the market).
The rising speed and the falling speed of the light bar, the holding time and the falling speed of the peak can be adjusted separately.
The brightness of the lamp can be adjusted freely. Microphone sensitivity can be adjusted 15 levels.
The reaction speed of AGC can be adjusted 15 levels.
super wide range of AGC adaptive algorithm to ensure the best effect.. Single button operation.
Exclusive Software – the function of eliminating ambient noise . Specific operation:(There are LED instructions operating time)
Normal mode
1. 1 second – Mode switch (there will be a corresponding preview).
2. 5 seconds – Enter the speed setting mode.
3. 10 seconds – Factory default
4. Double Click – The function of eliminating ambient noise is turned off.
5.Three Click – The function of eliminating ambient noise is turned on.
After keeping quiet, the recognition was completed in a few seconds.
6. Four Click – Enter sensitivity setting mode(15 optional)
7. Five Click – Enter the AGC speed setting mode(15 optional)
8. Six Click – Adjust the brightness of the light bar,low/medium/high
Speed setting mode:(In normal mode, press the button for 5 seconds to enter, press the button for 5 seconds to exit) .
1. 1 second
a. The rising speed of the light bar (15 optional)
b. The falling speed of the light bar (15 optional)
c. The holding time of the peak (15 optional)
d. The falling speed of the peak (15 optional)
e. Brightness adjustment (15 optional)
Loop in these functions.
2. Click the button – Loop to change the parameters set.
I. Environmental noise can be eliminated:(In normal mode ,three-click button opens and automatically exits after recognition)
(Special description:Evey environment has different environmental noise,Because it’s the microphone that picks up the sound,and the microphone can’t recognize noise or music,So we need to eliminate environmental noise. Then the sound reflected by the level lamp is the real sound of music. Before making this correction,make sure you don’t play music or talk ,the whole process will be completed in 5 seconds,so that the current environmental noise can be recognized.It is suggested that correction should be made once for every change of environment.)
Sensitivity setting mode:(In normal mode, Four Click to enter,No click 5 seconds to exit.)
1. Single -Click – Sensitivity is reduced(The more lights light on the indicator ,The sensitivity will getting more lower (15 optional)).
2. Double-Click – Sensitivity increases(The less lights light on the indicator , The sensitivity will getting more higher (15 optional)).
NOTE
In order to achieve the best effect,it is suggested to lower the sensitivity when the signal amplitude is large,and in the case of small signal,the sensitivity can be increased.
AGC Speed Mode:(In normal mode, Five Click to enter,No click 5 seconds to exit.)
1. Single -Click – AGC speed reduced (The more lights light on the indicator,
The AGC speed will getting more slower(15 optional)).
2. Double-Click – AGC speed increases(The less lights light on the indicator,
The AGC speed will getting more faster (15 optional)).
NOTE
The principle of AGC is to enlarge the input small signal to full screen display, reduce the large signal to the range that the screen can display, and automatically scale the signal according to the size of the input signal.
The speed of the AGC is the speed at which the small signal is amplified to the full screen display. Because the input signal exceeds the display area, it will be compressed immediately. If it is used in an environment where the signal amplitude varies greatly, it is recommended that the AGC speed be adjusted to faster.)
Package included
1 x assembled 16 Level Sound Control Level Indicator
Weight | 0.119 kg |
---|
Customers Also Viewed
5Pcs T2310 DC24V Programmable Digital Time Delay Switch Relay T2310 Normally Open Timer Control Module 0-999S/Min/Hour
$43.73Test & Measuring ModuleAdd to cartFeatureIndependent crystal oscillator, more accurate timing1. Convenient direct output wiring2. Add buzzer and audible alarm3. Add pause button to stop urgently5. Start and stop setting mode, provincial conversion, which is more convenient6. Automatically save when power off, run automatically when power on7. Timing units can be set separately, with 36 working combinations8. Timing range:0-999 seconds, …
3pcs 12V Normally Closed Vibration Sensor Module Plus Relay Module 2-in-1 Module Alarm Triggered Vibration Module
$25.34Sensor & Detector ModuleAdd to cartApplicationsThe vibration trigger alarm can be directly used in various high current and high voltage applications.Features1. With SW-420 sensitive and normally closed vibration sensor;2. The shock sensor can be externally connected to the detection position, and the line length has no effect on the sensitivity within 10 meters;3. Directly bring relays to drive high current …
5pcs DC-DC 3V-15V to 5V Fixed Output Automatic Buck Boost Step Up Step Down Power Supply Module
$12.23Power Supply ModuleAdd to cartFeatureThe DC-DC power module is automatically buck-boost to support the shutdown function.The maximum input voltage is 15VDC, the quiescent current is less than 200uA, the fixed output is 5V and the maximum output current is 600mA.Design work frequency of up to 1.2MHz, high stability, cost-effective, all industrial-grade components, long working voltage drift-free, suitable for demanding …
16 Keys TTP229 Capacitive Touch Module I2C Bus
$10.92Relay ModuleAdd to cartFeatureTP229 Capacitive Touch Module have 16 capacitive inputs.The module has two working modes. Module use only 16 key mode.For connection to microcontrollers (, Raspberry, STM) use the I2C interface.To capacitive inputs can connect special capacitive KeyPad, any metal objects, prints of electronic ink or pens, fruits.In our catalog have 16 key touch KeyPad or disk …
2 Wheels Ultrasonic Smart Robot Car Chassis Tracking Car Kit for
$59.76Smart Robot & Solar PanelAdd to cartFeatures1. Mechanical structure is simple and very easy to install.2. Car comes with 20 wire tachometer yards. You can speed, distance, composed of closed-loop systems.3. Car with four on the 5th battery compartment, convenient to the entire system power supply. At the same time equipped with a switch, easy start-stop system. Without additional very convenient, …
2 Wheels Ultrasonic Smart Robot Car Chassis Tracking Car Kit forRead More
5V Ultrasonic Microporous Atomizer Drive Board Humidifier Control Board PCBA Drive Circuit Board
$12.66Driver ModuleAdd to cartBasic product parametersSize:↓18*0.75MMFrequency:113KHZCapacitance:3200PFDrive voltage:3~12VMicropore diameter:8umNumber of micro holes:585 holesAtomization amount:50ML/HProduct advantages1. Low impedance2. Stable waveform3. High electromechanical conversion efficiency4. Low dielectric loss5. Low heat6. Large amount of atomization7. Life is greater than 1000 hours8. Strong acid and alkali corrosion resistancePackage includes1 x Driver Board
3Pcs W3231 AC110V~220V LED Digital thermostat Temperature Controller Regulator Heating Cooling Control Switch
$29.02Test & Measuring ModuleAdd to cartSpecificationDual Display Temperature Controller Temperature control range:-55C~120C/-67F~ 248FTemperature control accuracy:0.1 C / 0.1 FDisplay color:red + blueWorking power supply:AC110V~220VSensor:NTC 10K 1 Meter (with probe)Product Size:79.2mm≠41.9mm≠26.3mm Hole Size:72.1mm≠39.2mmOperation and display panelIndicator lightOperation guide1. Short press “SET” small digital tube to flash, press “” or “” to set the target temperature, press “Standby” button or no operation …
10pcs RX24 25W 6R 6RJ Metal Aluminum Case High Power Resistor Golden Metal Shell Case Heatsink Resistance Resistor
$20.97Electronic Accessories & SuppliesAdd to cartFeaturesIt has the characteristics of small size, high power and high precision.It is sealed by professional technology.It has the advantages of stronger heat resistance, higher temperature resistance, moisture resistance, high anti-vibration and explosion protection.Scope of application:Testing power supply, frequency converter, automobile LED lamp, automation equipment, audio, frequency divider, servo industry and other harsh industrial control …
Reviews
There are no reviews yet.