Assembled 16 Level Sound Control Level indicator Blue LED Mono VU Meter Audio Music Spectrum Board AGC for MP3 Speaker Amplifiers DIY
$72.16
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
Microphone signal acquisition, added noise cancellation function + automatic gain control. Practical effect is better.
Tips
1. The power supply voltage must be 5V. Do not exceed 5V. Otherwise, the lamp board will be damaged.
2. Power supplies with currents greater than 150MA (0.15A) can be used, no matter how large. All right,
3. Some power supplies have fast charge high voltage output function, please do not use this type of charger.
4. The product does not have a power supply, no power cord.
How to use
Sound Control Level indicator operating instructions
Featrues
By micophone pickup (Sound Control)
Aluminum alloy integrated molding housing 181×16 x 18.5 mm.
Mono 16 segment square lights to ensure adequate dynamic range and shock enough.
Exclusive custom square rounded lights strip. (There are no similar lights in the market).
The rising speed and the falling speed of the light bar, the holding time and the falling speed of the peak can be adjusted separately.
The brightness of the lamp can be adjusted freely. Microphone sensitivity can be adjusted 15 levels.
The reaction speed of AGC can be adjusted 15 levels.
super wide range of AGC adaptive algorithm to ensure the best effect.. Single button operation.
Exclusive Software – the function of eliminating ambient noise . Specific operation:(There are LED instructions operating time)
Normal mode
1. 1 second – Mode switch (there will be a corresponding preview).
2. 5 seconds – Enter the speed setting mode.
3. 10 seconds – Factory default
4. Double Click – The function of eliminating ambient noise is turned off.
5.Three Click – The function of eliminating ambient noise is turned on.
After keeping quiet, the recognition was completed in a few seconds.
6. Four Click – Enter sensitivity setting mode(15 optional)
7. Five Click – Enter the AGC speed setting mode(15 optional)
8. Six Click – Adjust the brightness of the light bar,low/medium/high
Speed setting mode:(In normal mode, press the button for 5 seconds to enter, press the button for 5 seconds to exit) .
1. 1 second
a. The rising speed of the light bar (15 optional)
b. The falling speed of the light bar (15 optional)
c. The holding time of the peak (15 optional)
d. The falling speed of the peak (15 optional)
e. Brightness adjustment (15 optional)
Loop in these functions.
2. Click the button – Loop to change the parameters set.
I. Environmental noise can be eliminated:(In normal mode ,three-click button opens and automatically exits after recognition)
(Special description:Evey environment has different environmental noise,Because it’s the microphone that picks up the sound,and the microphone can’t recognize noise or music,So we need to eliminate environmental noise. Then the sound reflected by the level lamp is the real sound of music. Before making this correction,make sure you don’t play music or talk ,the whole process will be completed in 5 seconds,so that the current environmental noise can be recognized.It is suggested that correction should be made once for every change of environment.)
Sensitivity setting mode:(In normal mode, Four Click to enter,No click 5 seconds to exit.)
1. Single -Click – Sensitivity is reduced(The more lights light on the indicator ,The sensitivity will getting more lower (15 optional)).
2. Double-Click – Sensitivity increases(The less lights light on the indicator , The sensitivity will getting more higher (15 optional)).
NOTE
In order to achieve the best effect,it is suggested to lower the sensitivity when the signal amplitude is large,and in the case of small signal,the sensitivity can be increased.
AGC Speed Mode:(In normal mode, Five Click to enter,No click 5 seconds to exit.)
1. Single -Click – AGC speed reduced (The more lights light on the indicator,
The AGC speed will getting more slower(15 optional)).
2. Double-Click – AGC speed increases(The less lights light on the indicator,
The AGC speed will getting more faster (15 optional)).
NOTE
The principle of AGC is to enlarge the input small signal to full screen display, reduce the large signal to the range that the screen can display, and automatically scale the signal according to the size of the input signal.
The speed of the AGC is the speed at which the small signal is amplified to the full screen display. Because the input signal exceeds the display area, it will be compressed immediately. If it is used in an environment where the signal amplitude varies greatly, it is recommended that the AGC speed be adjusted to faster.)
Package included
1 x assembled 16 Level Sound Control Level Indicator
Weight | 0.119 kg |
---|
Customers Also Viewed
20pcs Sound Module for Electronic Toy IC Chip Voice Recorder 120s 120secs Recording Playback Talking Music Audio Recordable Board Gift
$85.21Other Module BoardAdd to cartSpecificationsOperating Voltage:3-5VStandby CurrentRecording Time:120sRecording Input:adopt ADC 14 Bit,Audio Out DAC 14 BitRecording Voice Format:ADPCMRecording Distance:3-5mRecording/Voice Play Mode:independently play a piece of sound recording or play a piece of prerecordig voiceCycle Mode Play:can set cycle play times or constant cycle playPrerecording voice is burnt from external to SPI Flash,can prerecord chord music or voiceAdaptive Loudspeaker:8-32 ohm …
10pcs 130 Small Motor DIY Homemade Fan Toy Accessories
$10.33Module ComponentsAdd to cartFeatureThree-leaf soft paddle, the central ring yellow cap is ABS green plastic, the surrounding fan blade is super soft silicone material, even if it is touched by hand when transporting, it will not be injured, it is very suitable for young makers DIY use; Used with the motor will make your DIY work more convenient.MotorSize:25*20*15mm3-6V …
10pcs 130 Small Motor DIY Homemade Fan Toy AccessoriesRead More
10pcs CJMCU-9930 APDS-9930 Proximity and Non Contact Gesture Recognition Detection Attitude Sensor
$33.33Sensor & Detector ModuleAdd to cartFeatures• Optical modules integrated with ALS, infrared LEDs and proximity detectors• Ambient Light Sensing (ALS) – Approximate human visual response – Programmable interrupt capability with upper and lower thresholds – Up to 16-bit resolution – High sensitivity operation behind dark glass – 0.01lux low lumen performance• Proximity detection – Fully calibrated to 100 mm detection …
150pcs LED RGB Common Cathode 4-Pin F5 5MM Diode
$19.32Electronic Accessories & SuppliesAdd to cartFeaturesConvenient for DIY and repair equipment and electrical appliancesPerfect use for home, office and industry electrical equipment and electrical appliancesCurrent:20mAVoltage:3VSize:5mm Light Color:RED, BLUE, GREENPackage included150 x Cathode 4-PINS F5 5mm LED Light
220V 100W Adjustable Submersible Aquarium Water Heater thermostat Fish Tank
$32.87Electronic Accessories & SuppliesAdd to cartSpecifications1. Volt:220v2. Power:100w3. Microcomputer control,Power off memory function4. Made of high-intensity anti-explosion and corrosion protection material5. Ideal for use in either saltwater or freshwater aquariums6. Electronic temperature control, high accuracy:±1→7. Easy to read and adjust the temperature8. Fixed to the glass by suction9. Adjustable temperature is 16-36 degreePackage included1 x Fish tank heater1 x English …
220V 100W Adjustable Submersible Aquarium Water Heater thermostat Fish TankRead More
3pcs 7W Mini DC DC Boost Step Up Converter 2.6-5.5V to 5V Voltage Regulator Module
$10.84Boost & Buck ModuleAdd to cartDescription– DC DC Boost Converter Module working frequency 1MHZ. – Up to 93% Efficiency (usually is 84%-91%) – Quiescent current:190uA.– Current Limit Program(0.5-2.5A,Default 1.8A) – Size:21 x 11 x 4mm– Weight:1.5g– ProtectionOver current protection(OCP)Over voltage protection(OVP)Short circuit protection(SCP)Over temperature protection(OTP) Output 5VInput voltage DC 2.6 ~ 4.5V,output DC 5V±3%Maximum output:5V/1300MA(See the table below for details) …
3pcs 7W Mini DC DC Boost Step Up Converter 2.6-5.5V to 5V Voltage Regulator ModuleRead More
120mm PC Case Fan Computer Ultra Silent LED Lights Cooler Cooling Heatsink
$15.34Electronic Accessories & SuppliesAdd to cartFeatures3pin ultra silent LED case fan.Each fan is With 15 LED lights.Connect to power supply or motherboard.Anti-vibration rubber pads on all four corners keep the fan super silent.It offers incredible cooling to increase the longevity and stability of the system and components.Cooling fan for desktop computer case and CPU cooler.SpecificationLED Light Color:Colorful MarqueeCompatible CPU:Computer Case …
120mm PC Case Fan Computer Ultra Silent LED Lights Cooler Cooling HeatsinkRead More
Reviews
There are no reviews yet.