BESTEP 1 Channel 24V Relay Module High And Low Level Trigger for
$4.77
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
Maximum load:AC 250V/10A, DC 30V/10A.
The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA.
Working voltage:24V.
Every channel of the module can be set high or low level trigger by jumper.
Fault tolerant design, even if the control line is disconnect, the relay will not act.
Power indicator (green), 1 relay status indicator (red).
The interface design is humanized, all interfaces can be directly connected through the terminals, so it is very convenient.
Module size:50mm x 25mm x 18.5mm (length x width x height).
There are 4 fixed bolt holes, holes 3.1mm, spacing 67mm x 44.5mm.
Module interface
1, DC+:Connect the power positive pole.
2, DC-:Connect the power negative pole.
3, IN1:Can be controlled by high or low level.
Relay output:there is a 3 wire interface, all interfaces can be directly connected to lead to facilitate user use.
1, NO1:Relay normal open, the relay suspends before pulling in, and then short-connect with the COM.
2, COM1:Relay common interface
3, NC1:Relay normal close, short connected with COM before pulling inand suspended after pulling in.
High and low level trigger option
1. The 3-pin is the high level trigger selection.
2. When COM is short connected with LOW, the corresponding relay is LOW level trigger, while when COM is short connected with high end is high level trigger.
Package Included
1 x 1 Channel 5V Relay Module
Weight | 0.018 kg |
---|
Customers Also Viewed
Precision PH Test Strips Short Range 0.5-5.0 indicator Paper Tester 100 Strips Boxed w/ Color Chart
$18.21Lab ChemicalsAdd to cartSpecificationStrips:100 StripsScale Reads From 0.5 to 5.0Features– Measures pH values in the range of 0.5 to 5.0– Precise precise color matching. The color chart has pH matches at 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0– Color chart clean measurement and clear results cost-effective and easy to use.– The test strip color changes …
5MP Camera Module 5 Megapixel 175 Focal Adjustable Length Night Vision NoIR Camera with Automatic IR-CUT
$37.17Other Module BoardAdd to cartIntroductionThe Raspberry Pi IR-CUT Camera is the day and night camera , automatic turn the mode by identify the intensity of light.You can get the best imaging whatever it is in the daytime or in dark.It’s a built-in IR-CUT camera, can be used during the day and night , together with the 175 degree fish …
3PCS DC 24V 21000RPM High Speed Large Torque 775 Motor
$68.84Smart Robot & Solar PanelAdd to cartSpecificationsMotor height:66.3 mm(without bearing sleeve)Motor Diameter:42.3 mm(plus the magnetic protection ring is 44.5MM)Output shaft diameter:5 mmOutput shaft length:10 mmNet weight:418 gVoltage:24VCurrent:2.5ASpeed:21000RPMQuantity:3Package included3 x Motor
Original AI-thinker A9 GPRS + GSM SMS Pudding Development Board Voice Wireless Data Transmission Module
$21.86Motherboard & Development BoardAdd to cartDevelopment board introductionThe A9 development board is a multi-function development board based on the Axin A9G GPRS/GSM module, which can be used to verify the basic communication functions and peripheral functions of the A9 module.The A9 development board has basic telephone/sms, GPRS network communication.The A9 development board features lithium battery charge management, microphone, speaker interface, …
10pcs Multi-Function Switching Board Adapter Support J-LINK V8 V9 ULINK 2 ST-LINK Emulator STM32
$29.63Other Module BoardAdd to cartInterface– Interface 1:2.54 pitch 20-pin corner seat (can be directly connected to JTAG seat)– Interface 2:2.54 pitch 20-pin straight socket– Interface 3:2.0 pitch 20 pin straight socket– Interface 4:2.54 pitch 14-pin straight socket– Interface 5:2.54 pitch 10 pin straight socket– Interface 6:2.0 pin 10 pin straight socket– Interface 7:2.54 pitch 6 pin straight socket– Interface …
Reviews
There are no reviews yet.