DIY PCB Circuit Board 4MOS Welding Equipment Portable 12V Battery Storage Spot Welding Machine with Spot Welders Pen for 18650/26650
$32.79
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
Lithium battery, advantages:portable, stable and reliable, and durable.
Users need to supply 12V battery power, welding current is about 90A ~ 130A, for the common 18650/26650/32650 0.1mm ~ 0.15mm nickel plated welding. After several generations of product updates, it is now upgraded to automatically trigger the welding, liberating the buttons of the fingers.
Switch function:press the switch for 1.5 seconds to switch (blue light:low power, green light:medium power, red light:high power)
Power supply requirements
System voltage:12V-14.6V (capacity X rate = must be greater than 150A)
Current requirements:150A or more instantaneous output (such as car starter power supply, 3S RC high-power battery pack, 20A lead-acid battery with good performance above 20A)
Misunderstanding:Don’t think that you can use 3 series 18650 series to supply power. After all, the conventional 18650 only has 3-5C discharge rate, so each section can only provide 2.5A*3=7.5A load capacity, which is far from 150A unless 20 Parallel connection, 3 series and 60 sections of 18650 are possible, but it is obviously unrealistic.
Features
1. it is equipped with a 3.7-4.2V 4.5ah power lithium battery with a discharge rate of 100C and a load capacity of about 400A.
2. Through the MOS tube output, this energy will be concentrated at the end of the welding pen, and it will be heated by short circuit.
3. Fuse the nickel sheet firmly with the battery. All this will happen in milliseconds,And it is precisely controlled by the single-chip microcomputer program without trigger switch.
4. Free your fingers or foot pedals completely.
5. Comes with a charging control module, which charges the battery through the USB port, and is charged with hundreds of welding points on commonly used nickel-plated sheets within 0.1mm-0.15mm.
Battery recommendation
(1) 20-45ah Lead-acid battery with good performance and small internal resistance
(2) 3.5-5.5ah 45C 3S aeromodel lithium battery pack
(3) 30-35ah capacity 18650 battery pack
Package Included
1 x Main Board
2 x 10AWG Input Wires
2 x Spot Soldering Pens
Weight | 0.11 kg |
---|
Customers Also Viewed
PM3 Proxmark3 V5.0 IC+ID Full Encryption Card Reader All-in-one Access Control Elevator Garage NFC Multiple Card
$207.99Card ReaderAdd to cartFeatureIt is only used for learning RFID NFC communication and testing the technical security of RFID, as a basic learning tool for RFID personnel. Use for illegal purposes is prohibited.Increase the reading memory, you can read more cards, and the reading speed is faster and stronger.Support one-click reading, easy export and import filesSupport dual-frequency cards, …
10pcs DC3.3-4.2V JDY-64 Lossless Bluetooth 4.2 Module Stereo Audio bluetooth Board
$42.69Smart ModuleAdd to cartProduct introductionJDY-64 is a low power consumption lossless two-channel stereo design, and the overall performance is very advantageous. It only needs to connect the module to the application products so that users can quickly achieve wireless music transmission, which defaults no prompt tone for button, switch, connection, fragment opening, and integrated SD card defaults earphone …
10pcs DC3.3-4.2V JDY-64 Lossless Bluetooth 4.2 Module Stereo Audio bluetooth BoardRead More
LILYGO TTGO T-Bot ESP32 Main Chip T-Block with HC-SR04 Module Programmable Hardware MINI Trolley
$91.31Smart ModuleAdd to cartMore Information:https://github.com/Xinyuan-LilyGO/TTGO_TWatch_Library FeatureHardware SpecificationChipsetESPRESSIF-ESP32 (Wi-Fi & Bluetooth)240MHz Xtensa single-/dual-core 32-bit LX6 microprocessorFLASH16MB / PSRAM 8MBSRAM 520 kB SRAMButtonSwitch, ResetUSB to TTLCP2104Modular interfaceI2C On-board clock40MHz crystal oscillator Working voltage2.7V-3.6VWorking temperature range -40→ ~ +85→Size55*46*53 mmWeight48.3gPower SupplyPower Supply InputUSB 5V/1ACharging current500mABattery Input 3.7-4.2VBattery3.7V lithium batteryJST Connector2Pin 1.25mmUSBWi-FiStandardFCC/CE-RED/IC/TELEC/KCC/SRRC/NCC(esp32 chip)Protocol802.11 b/g/n(802.11n,speed up to150Mbps)A-MPDU and A-MSDU polymerization,support 0.4┢S Protection intervalFrequency …
UAF42 Active High Pass Low Pass Bandpass Filtering Frequency Gain Q Adjustable General Filter
$41.54Other Module BoardAdd to cartUAF42 has the following featuresHighly versatile, can be changed as high pass, low pass, band pass and band stop filters as needed (Jumper settings);The design is simple. BB has also designed a software specifically for the UAF42, which makes it easy and flexible to design different types of filters.With high precision frequency and high Q …
3pcs Geekcreit Yellow 3D Mini SMD PCB Stereo Christmas Tree DIY Music Kit
$15.84DIY Electronic KitsAdd to cartDescriptionThis is a simple mini Christmas tree DIY kit. Three different PCBs are combined into a 3D stereo Christmas tree model. A variety of different colors can be selected. It can be powered by a button battery and can be free from the power supply. Built-in 7 LED gradient modes plus 7 different Christmas melody.Manual:Click …
3pcs Geekcreit Yellow 3D Mini SMD PCB Stereo Christmas Tree DIY Music KitRead More
10pcs 2.54mm 2x4P 8P Double Row Female Straight Pin Header Needle Socket Pin Strip
$6.55Electronic Accessories & SuppliesAdd to cartSpecificationsSpacing:2.54mmGender of Connector:FemaleNumber of Pins:2x4PinType of Row:Double RowType of connector:StraightPackage included10 x 2.54mm 8P double row female straight pin header
Excellway 20Pcs JST Female and Male Battery Connector Set
$10.11ConnectorsAdd to cartDescriptionBrand:ExcellwayName:5 x JST BEC Set Female and Male Battery Connector Bu ggy Truck PlaneMaterial:metal + PlasticFeatures1. Includes 10 RC JST BEC Set Female and Male Battery Connector2. Long service life.3. Easy to install.Package Included5 x male Connectors5 x female Connectors5 x female pins5 x male pins
Reviews
There are no reviews yet.