Dual Modbus-Rtu 2-way Relay Module Switch input and Output RS485/TTL Communication Controller
$19.35
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
LC 2 channel Modbus relay module equipped with mature and stable 8-bit MCU and RS485 level communication chip, adopt standard MODBUS RTU format RS485 communication protocol. It can realize 2bit input signal detection and 2-bit relay output. It can be used for digital detection or power control occasions.
Features
1. Support Modbus RTU protocol
2. Support RS485/TTL UART interface
3. Output indicator in multi-mode
4. The address can be set
5. Support input reverse connection protection
6. Relay switch output
7. Support parameter memory function
Parameters
1. Item name:Dual Modbus Relay Module
2. Work voltage:DC 7V~24V
3. Baud rate:4800/9600/19600bps(default 9600bps)
4. Optocoupler input signal:DC 3.3V~30V
5. Set address:1~255
6. Relay control mode:ON/OFF, Delay_ON, Delay_OFF mode
7. Delay time:0~6553.5s
8. Load:AC 250V 10A or DC 28V 10A
9. Protocol:Modbus RTU
10. Interface:RS485/TTL UART
11. Control channel:2channel
12. Operating Temperature:-20→~85→
13. Operating Humidity:5%~95%RH
14. Module Size:85 x 49 x 19mm
Modbus RTU Command
1. Suppose the device address is 0xFF so return 00 10 00 00 00 01 02 00 FF EB 80 and the 9th byte is device address.
2. Turn ON CH_1 Relay (Normal Mode)
Send:FF 05 00 00 FF 00 99 E4
Return:FF 05 00 00 FF 00 99 E4
Note_1:The 3rd and 4th byte are relay addresses. So it can be 0x0000, 0x0001, 0x0002, 0x0003.
Note_2:The 5th and 6th byte are relay data. 0xFF00 means turn ON relay and 0x0000 means turn OFF relay.
3. Turn OFF CH_1 Relay(Normal Mode)
Send:FF 05 00 00 00 00 D8 14
Return:FF 05 00 00 00 00 D8 14
4. Turn ON CH_2 Relay(Normal Mode)
Send:FF 05 00 01 FF 00 C8 24
Return:FF 05 00 01 FF 00 C8 24
5. Turn OFF CH_2 Relay(Normal Mode)
Send:FF 05 00 01 00 00 89 D4
Return:FF 05 00 01 00 00 89 D4
6. Turn ON All relays
Send:FF 0F 00 00 00 08 01 FF 30 1D
Return:FF 0F 00 00 00 08 41 D3
7. Turn OFF All relays
Send:FF 0F 00 00 00 08 01 00 70 5D
Return:FF 0F 00 00 00 08 41 D3
8. Set device address to 0x01
Send:00 10 00 00 00 01 02 00 01 6A 00
Return:00 10 00 00 00 01 02 00 01 6A 00
Note:The 9th btye is device address.
9. Set device address to 0xFF
Send:00 10 00 00 00 01 02 00 FF EB 80
Return:00 10 00 00 00 01 02 00 FF EB 80
10. Read device address
Send:00 03 00 00 00 01 85 DB
Return:00 03 02 00 FF C5 C4
Note:The 5th btye is device address.
11. Read relay status
Send:FF 01 00 00 00 08 28 12
Return:FF 01 01 01 A1 A0
Note:The 4th means which one relay. 0 means OFF and 1 means ON.
12. Read optocoupler input staturs
Send:FF 02 00 00 00 08 6C 12
Return:FF 02 01 01 51 A0
Note:The 4th means which one input. 0 means low level signal input and 1 means high level signal input.
13. Set baud rate 4800bps
Send:FF 10 03 E9 00 01 02 00 02 4A 0C
Return:FF 10 03 E9 00 01 C5 A7
Note:The 9th btye is baud rate value. 0x02 is 4800bps. 0x03 is 9600bps. 0x04 is 19200bps.
14. Set baud rate 9600bps
Send:FF 10 03 E9 00 01 02 00 03 8B CC
Return:FF 10 03 E9 00 01 C5 A7
15. Set baud rate 19200bps
Send:FF 10 03 E9 00 01 02 00 04 CA 0E
Return:FF 10 03 E9 00 01 C5 A7
16. Turn ON CH_1 Relay(2S Flashing Mode)
Send:FF 10 00 03 00 02 04 00 04 00 14 C5 9F
Return:FF 10 00 03 00 02 A4 16
Note_1:The 3rd and 4th byte are relay addresses. So CH1~CH4 can be 0x0003, 0x0008, 0x000D, 0x0012.
Note_2:The 10th and 11th byte are delay time in second. The minimum delay time is 0.1s. The relay will OFF after delay time. So the delay time in this command is:0x0014*0.1=2S.
17. Turn OFF CH_1 Relay(3S Flashing Mode)
Send:FF 10 00 03 00 02 04 00 02 00 1E A5 99
Return:FF 10 00 03 00 02 A4 16
Note:Relay will ON after delay time. So the delay time in this command is:0x001E*0.1=3S.
Package includes
1 x Dual Modbus Relay Module
| Weight | 0.045 kg |
|---|
Related products
6CH 6-way Relay Expansion Board Hat Support for Raspberry Pi A+/B+/2B/3B
$45.91Relay ModuleAdd to cartThe main purposeThe weak current of the Raspberry Pi IO output can control the switching of high current through this product, and is often used in smart homes such as smart homes. Combined with the network function of the Raspberry Pi, remote control of home appliances can be realized.Note:Raspberry Pi has 40Pin and 26Pin interfaces, …
6CH 6-way Relay Expansion Board Hat Support for Raspberry Pi A+/B+/2B/3BRead More
5pcs QF1023-A-10S Timing Relay Delay Switch Relay Delay Timer Switch Timing Relay 10S Adjustable
$25.79Relay ModuleAdd to cartSpecificationsWorking voltage:12V DCDelay length:0-10SAccuracy:1/100Error:2%Delay:using single chip delayPCB size:70*26*18mmInstallation hole center distance:64mmAperture:3mmFunction:Turn on the relay immediately after power-on, and automatically break after a period of time;Special reminder:This is not a power-off delay disconnect module, the relay will be disconnected immediately when the input power is disconnected.Package Included5 x QF1023-A-10S Timing Relay Delay Switch Relay Delay Timer …
Photosensitive Resistance Sensor with Relay Module 5V Optical Control Light Tracking Switch Module
$7.17Relay ModuleAdd to cartUsageLight detection, brightness detection, potentiometer can be adjusted to detect the brightness of the valve point, with its own relay, can do a variety of brightness detection switch.Features1. Using the photoresistor to induce the intensity of light, with its own relay, directly control the load2. Adjust the sensitivity with the potentiometer. Set the start relay …
JK12-A 12V Time Adjustable Relay Module with LED Digital Tube Dynamic Display Countdown Single Chip Relay
$10.92Relay ModuleAdd to cartUsageThis module starts work after triggering. If you need to set the power to start timing, then you can connect the two trigger lines directly.inchTriggerinch is simply a touch of two lines. It can be a short touch or a long time. Timing starts when you touch each other.K:Switching signal trigger, valid at the leading …
Customers Also Viewed
3pcs 2x50W TPA3116 AUX+Bluetooth 5.0 HIFI High Power Digital Amplifier Stereo Board AMP Amplificador Home theater without Shell
$54.90Amplifier BoardAdd to cartSpecificationsAudio input:AUX+bluetoothWork voltage:9-24 DCPower:2*50WCooling fin:LargeSpeaker:4-8Ω;30-200WProtection:Overvoltage,undervoltageSize:84*52*24mmFeatures1. This product is full of materials, featuring high performance and high performance price, especially for HIFI music power amplifier with high power and high fidelity.2. TPA3116D2 is a type D amplifier IC launched by TI company, which has very high index parameters.The maximum modulation frequency is 1.2MHZ, and the high …
5PCS USB To TTL Debug Serial Port Cable for Raspberry Pi 3B 2B / COM Port
$20.44Raspberry Pi & Orange PiAdd to cartMore info and driver, please !!!Supports WIN XP/WIN7/ WIN8/ WIN10Reference to WIN10, you can !!!NoteNo driver on raspberry pi 3 model bRaspberry Pi main board is not included!Package included5x USB To TTL Debug Serial Port Cable For Raspberry Pi / COM Port
DIY LED Light Kit ONLY for LEGO 60197 Passenger Train Building Block Bricks Lighting
$32.79DIY Electronic KitsAdd to cartSpecificationInterface:USBColor:As the picture shownThe product is just a light kit, not included the model!!!FitmentONLY For LEGO 60197 Passenger Train Building Block Bricks ToyFeaturesEasy to install.LED powered by USB.Make your model more cool.Package Included1 x LED Light Kit(Model Not Included)
5Pcs M5Stack I/O Hub 1 to 6 Expansion Board Grove I/O interface for Blockly Development IoT MEGA328 Module for Arduino
$75.21Converter BoardAdd to cartDescriptionPbHUB, is a expander for singel-bus GROVE PORTB(Black port on M5GO Base). 1-to-6. PortB can be used as GPIO and analog in two data lines connected to GPIO36 and GPIO26 on ESP32. Same as PaHUB, it provides a solution for mutiple device control by PORTB. With PbHUB each of the IO can be configurated to …
10Pcs Green LED Power Symbol Momentary Latching Switch LED Light Push Button SPST
$20.86Electronic Accessories & SuppliesAdd to cart10Pcs Green LED Power Symbol Momentary Latching Switch LED Light Push Button SPSTDecriptionLatching type:Push it– on, push it again — offLED color:GreenSize(H*D):1.4 x 1cm / 0.55inch x 0.39inch (approx)Quantity:10 pcsFunction:MomentaryLED light voltage:3.2VSwitch voltage:12VMaximum operating current:20mAWith led light, with power symbol, light touch switchEasy to use and installNote1. Please check the picture and part number carefully …
10Pcs Green LED Power Symbol Momentary Latching Switch LED Light Push Button SPSTRead More
100Pcs Red Heat Shrink Solder Sleeve Seal Wire Splice Butt Connector AWG 22-18GA
$72.89ConnectorsAdd to cartName:(100) Heat Shrink Solder Sleeve Seal Wire Splice Butt Connector AWG 22-18GA RedMaterial:Tinned CopperColor:RedShrinking Ratio:2:1Working temperature:-55℃~125℃Shrink temperature:80℃Solder melting temperature:138℃Complete solder melting temperature:160℃Cable cross-section:0.5mm-1.0 mmDiameter:3mm/0.12inch(appr.)FeaturesPlacement on Vehicle:Left, Right, Front, Rear.Solder and seal and with advanced waterproof function.Polyolefin tubing in outside and hot melt adhesive in inside.Can be ideal used in marine and automobile applications.Improve pullout strength, …
100Pcs Red Heat Shrink Solder Sleeve Seal Wire Splice Butt Connector AWG 22-18GARead More
Reviews
There are no reviews yet.