Dual Modbus-Rtu 2-way Relay Module Switch input and Output RS485/TTL Communication Controller
$19.35
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
LC 2 channel Modbus relay module equipped with mature and stable 8-bit MCU and RS485 level communication chip, adopt standard MODBUS RTU format RS485 communication protocol. It can realize 2bit input signal detection and 2-bit relay output. It can be used for digital detection or power control occasions.
Features
1. Support Modbus RTU protocol
2. Support RS485/TTL UART interface
3. Output indicator in multi-mode
4. The address can be set
5. Support input reverse connection protection
6. Relay switch output
7. Support parameter memory function
Parameters
1. Item name:Dual Modbus Relay Module
2. Work voltage:DC 7V~24V
3. Baud rate:4800/9600/19600bps(default 9600bps)
4. Optocoupler input signal:DC 3.3V~30V
5. Set address:1~255
6. Relay control mode:ON/OFF, Delay_ON, Delay_OFF mode
7. Delay time:0~6553.5s
8. Load:AC 250V 10A or DC 28V 10A
9. Protocol:Modbus RTU
10. Interface:RS485/TTL UART
11. Control channel:2channel
12. Operating Temperature:-20→~85→
13. Operating Humidity:5%~95%RH
14. Module Size:85 x 49 x 19mm
Modbus RTU Command
1. Suppose the device address is 0xFF so return 00 10 00 00 00 01 02 00 FF EB 80 and the 9th byte is device address.
2. Turn ON CH_1 Relay (Normal Mode)
Send:FF 05 00 00 FF 00 99 E4
Return:FF 05 00 00 FF 00 99 E4
Note_1:The 3rd and 4th byte are relay addresses. So it can be 0x0000, 0x0001, 0x0002, 0x0003.
Note_2:The 5th and 6th byte are relay data. 0xFF00 means turn ON relay and 0x0000 means turn OFF relay.
3. Turn OFF CH_1 Relay(Normal Mode)
Send:FF 05 00 00 00 00 D8 14
Return:FF 05 00 00 00 00 D8 14
4. Turn ON CH_2 Relay(Normal Mode)
Send:FF 05 00 01 FF 00 C8 24
Return:FF 05 00 01 FF 00 C8 24
5. Turn OFF CH_2 Relay(Normal Mode)
Send:FF 05 00 01 00 00 89 D4
Return:FF 05 00 01 00 00 89 D4
6. Turn ON All relays
Send:FF 0F 00 00 00 08 01 FF 30 1D
Return:FF 0F 00 00 00 08 41 D3
7. Turn OFF All relays
Send:FF 0F 00 00 00 08 01 00 70 5D
Return:FF 0F 00 00 00 08 41 D3
8. Set device address to 0x01
Send:00 10 00 00 00 01 02 00 01 6A 00
Return:00 10 00 00 00 01 02 00 01 6A 00
Note:The 9th btye is device address.
9. Set device address to 0xFF
Send:00 10 00 00 00 01 02 00 FF EB 80
Return:00 10 00 00 00 01 02 00 FF EB 80
10. Read device address
Send:00 03 00 00 00 01 85 DB
Return:00 03 02 00 FF C5 C4
Note:The 5th btye is device address.
11. Read relay status
Send:FF 01 00 00 00 08 28 12
Return:FF 01 01 01 A1 A0
Note:The 4th means which one relay. 0 means OFF and 1 means ON.
12. Read optocoupler input staturs
Send:FF 02 00 00 00 08 6C 12
Return:FF 02 01 01 51 A0
Note:The 4th means which one input. 0 means low level signal input and 1 means high level signal input.
13. Set baud rate 4800bps
Send:FF 10 03 E9 00 01 02 00 02 4A 0C
Return:FF 10 03 E9 00 01 C5 A7
Note:The 9th btye is baud rate value. 0x02 is 4800bps. 0x03 is 9600bps. 0x04 is 19200bps.
14. Set baud rate 9600bps
Send:FF 10 03 E9 00 01 02 00 03 8B CC
Return:FF 10 03 E9 00 01 C5 A7
15. Set baud rate 19200bps
Send:FF 10 03 E9 00 01 02 00 04 CA 0E
Return:FF 10 03 E9 00 01 C5 A7
16. Turn ON CH_1 Relay(2S Flashing Mode)
Send:FF 10 00 03 00 02 04 00 04 00 14 C5 9F
Return:FF 10 00 03 00 02 A4 16
Note_1:The 3rd and 4th byte are relay addresses. So CH1~CH4 can be 0x0003, 0x0008, 0x000D, 0x0012.
Note_2:The 10th and 11th byte are delay time in second. The minimum delay time is 0.1s. The relay will OFF after delay time. So the delay time in this command is:0x0014*0.1=2S.
17. Turn OFF CH_1 Relay(3S Flashing Mode)
Send:FF 10 00 03 00 02 04 00 02 00 1E A5 99
Return:FF 10 00 03 00 02 A4 16
Note:Relay will ON after delay time. So the delay time in this command is:0x001E*0.1=3S.
Package includes
1 x Dual Modbus Relay Module
Weight | 0.045 kg |
---|
Customers Also Viewed
10pcs 433MHZ ASK Wireless Transmission Module TX11 High Power Module infinite Emission Circuit Board
$19.40Smart ModuleAdd to cartFeatures(1) The transmission power is large, and the transmission power is greater than 30 mW;(2) Wide operating voltage, 2.5V-9V;(3) Operating frequency:433.92 MHz(4) Using SAW frequency stabilization (+-75KHZ), the working frequency is stable;(5) With the RXB8 receiving module, the distance can reach 800 meters;(6) Static power consumption Low emission is current consumption:10mA, there is basically no …
SZWENGAO WG8-40S1210 8-40V to 12V 10A Automatic Buck Boost Power Converter Car Voltage Regulator Step Down Step Up Module
$39.35Boost & Buck ModuleAdd to cartFeatures*Designed according to CE/RoHS*100% full power, high stability output*100% full load aging test*Imported components*Imported high-quality thermal silica gel potting, waterproof, dustproof and shockproof* Die-cast aluminum alloy shell, small size, simple installation*Internal protection functions such as over current, low voltage, over temperature, short circuit, reverse connection, etc.*Wide voltage input, high conversion efficiency of 88-90%*Long service life …
10Pcs Wemos DS18B20 Module for D1 Mini DS18B20 Temperature Measurement Sensor Module
$36.17Sensor & Detector ModuleAdd to cartFeatures1. Supporting the D1 MINI2. The Ar-duino compatible, using A-rduino IDE for programming3. 11 the XI/O pins4. 1 XADC pin (0-3.3V)5. Support the OTA onlinePackage included10 x DS18B20 Module20 x Long female pin20 x Short female pin20 x Normal pin
ASK Wireless Receiving Module with Decoding EV1527 Encoding Transmitter
$10.92Smart ModuleAdd to cartFeaturesThe latest anti-lost code self-recovery function solves the trouble of losing code.The latest anti-interference software is involved to prevent accidental startWidely compatible, PT2262, PT2260, EV1527, PT2240, etc.Ultra-wide pulse width range:105 to 515 oscillating resistorsIn jog mode:support combination codeSelf-locking mode:support combination codeIn the interlock mode:4 independent open and close, the combination code is closedYou can learn …
ASK Wireless Receiving Module with Decoding EV1527 Encoding TransmitterRead More
50W 18V Monocrystaline Al-Alloy at back Solar Panel Dual 12V/5V DC USB Charger for Car RV Boat
$88.07Smart Robot & Solar PanelAdd to cartFeatures– EVA+PET at front panel and Al-Alloy at back, light-weight but durable.– USB and DC output interface for more purpose.– Equipped with 12V DC5.5×2.1 & 5V USB output interface.– Dedicated for 12V battery and 5V device charging. – High output 3000mAh USB, can full-charge an iX in 1.5h in max power.– Mono-crystalline solar Cell with …
Reviews
There are no reviews yet.