3pcs ICL7107 Voltmeter DIY Electronic Production Kit DC5V 35mA Voltage Meter Digital Voltmeter
$25.54
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
Kit Name:ICL7107 Voltmeter DIY Kit
PCB size:70.6*39mm
Head mounting opening size:77*40mm
Display window size:51*24mm
Soldering manual:Click here.
Electrical parameters
Working voltage:DC5V
Working current:35mA
Measurement accuracy:It can be calibrated to get higher precision and no parameters at present.
Measuring range:divided into 3 files, 0-2V file Measuring small voltage
0-20V file measuring low voltage
0-200V, measuring higher voltage.
Range selection method:solder joints with gear selection on the board,
When the two points of the 0-2V file are soldered together, and the resistance of the RX soldering resistor is 1K, the measurement range is 0-2V;
When soldering 2 points of 0-20V file together, the RX soldering resistance is 100K, the measuring range is 0-20V;
When soldering 2 points of 0-200V file together, the RX soldering resistance is 1M, the measurement range is 0-200V;
Overrange display:first position shows 1 or -1
In the kit, the RX is available in 100K and 1M, and the buyer selects the soldering according to his measurement range. This voltmeter can also be changed into an ammeter. The method of changing the current meter:the PCB reserve a 2W 0.1 ohm high-precision resistance soldering position on the board, solder this resistance, and then RX does not need to be soldered. This is a 0-2A ammeter.
Display color:red
Tools needed to make the production:multimeters, electric irons, and water pliers are needed.
Package included
3 x PCB board
9 x 1N4148
3 x 5.1V Zener Diode
3 x 100 ohm resistor
3 x 270 ohm resistor
6 x 2K resistor
3 x 20K resistor
3 x 47K resistor
3 x 56K resistor
6 x 100K resistor
3 x 1M resistor
3 x 2.2MH inductor
6 x 104 monolithic capacitor
6 x 101 monolithic capacitor
3 x 224 monolithic capacitor
3 x 474 monolithic capacitor
6 x 10UF25V electrolytic capacitor
3 x C1815
3 x TL431
6 x 3296-202 potentiometer
3 x XH2.54-2P straight seat
3 x XH2.54-2P line
3 x KF301-2 seat
3 x 40P chip holder
3 x LT7107 chip
12 x 0.56 one common digital tube
3 x case
12 x M2*6 self-tapping screws
Weight | 0.153 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.