Original JYETech 15801K DIY WAVE2 DSO150 Touch Screen Dual Channel Digital Storage Oscilloscope Kit
$140.82
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
JYE TECH WAVE2 is the latest 2-Channel Oscilloscope on the market, catered to hobbyists, educational institutions and professionals in the field of electronics and mechatronics. Featuring a bright and easy-to-use color touch screen display with access to many features only advance oscilloscopes offer such as built-in function generator and X-Y plotting. With an optional battery, it is portable enough to be taken wherever the jobs that need to be done is. Its an exciting project for any DIY-er, or can be purchased fully assembled for those who are looking to start using it right away. It comes with everything you need out of the box, with a micro-USB cable and two high-quality BNC probes. Enjoy and start creating!
For data transfer and program update, please buy product ID:1597439
Documents
WAVE2 Quick Start Guide
WAVE2 Assembly Guide
Main board schematic
Analog board schematic
Highlights of WAVE2
Channels:2
Bandwidth:0-200KHz per channel
Sensitivity range:5mV/DIV-20V/DIV (using x1 probe)
Maximum input voltage:50Vpk (using x1 probe)
Maximum real time sampling rate:1MS/s
Time Base range 10us/DIV-500s/DIV
X-Y Display Feature:Yes
Function Generator Capability:Built-in 0 20KHz (sine) dual channel DDS function generator
Display Resolution:320 x 240 Color display
Display Size:2.4▼
Touch Display Capability:Yes
Battery powered and portable (battery not included in DIY Kit)
General
Touch panel operation
Y-X mode available
Built-in 2-channel DDS function generator
Light weight and portable
Vertical
Number of Channel:2
Analog Bandwidth:DC-200KHz
Sensitivity:5mV/Div – 20V/Div (with x1 probe)
Sensitivity error
Resolution:12-bit
Input Impedance:1M ohm / 25pF
Maximum Input Voltage:50Vpk
Coupling:DC, AC
Horizontal
Max Real-time Sampling Rate:1Msps (per channel)
Timebase:10us/Div – 500s/Div
Record Length:1024 points
Trigger
Trigger Modes:Auto, Normal, Single
Trigger Types:Rising/falling edge
Trigger Position:1/2 of buffer size
Trigger Source:Ch1, Ch2, External
Maximum external trigger voltage:15V
External trigger threshold
Function Generator
Number of channel:2
Waveform type:Sine, Square, Saw-tooth, Stair
Frequency range:DC-20KHz (Sine)
Amplitude range:0-3V (peak value)
Offset:0V or +3.3V
Duty Cycle:0- 100%
Phase:-360~360 degree
Power Supply
Powered on 3.7V Li-ion battery or USB
Current consumption:~300mA @ 3.7 5V
Internal batter charger (optional)
Automatic power off on battery
Battery running time:Appr. 3hrs (when fully charged)
Other Features
Y-X display mode
On-screen measurement display
Save / recall up to 4 captures
Serial output of captured data
Serial port format:LVTTL, 115200bps, 8N1
Built-in 1KHz/3.3V test signal
Package included
1 x WAVE2 oscilloscope DIY kit
1 x 117 board and one 118 board
2 x BNC x1/x10 selectable probes
Weight | 0.35 kg |
---|
Customers Also Viewed
10pcs MAX9814 High Performance Microphone AGC Amplifier Module CMA-4544PF-W
$90.79Amplifier BoardAdd to cartSpecifications– Supply Voltage:2.7v-5.5v @ 3mA current– Output:2Vpp on 1.25V bias– Frequency Response:20Hz – 20KHz– Programmable Attack and Release Ratio– Automatic gain, selectable max from 40dB, 50dB or 60dB– Low Input-Referred Noise Density of 30nV/– Low THD:0.04% (typ)– Low Power Shutdown Mode– Built-in 2V low-noise microphone bias– -40°C ~ +85°C extended temperature rangePackage included10 x Microphone …
10pcs MAX9814 High Performance Microphone AGC Amplifier Module CMA-4544PF-WRead More
T-AMP 2 x 15W TA2024 Digital Audio Amplifier Board Mini AMP
$19.04Amplifier BoardAdd to cartFeature1. The power to more than 12V current 3A2. The speaker is best to use an impedance of 4 ohms, some of the high sensitivity3. For some signal level is relatively low tone, to add the preamplifier to play the effect4. Note the positive and negative can not be reversed, use the power supplyElectrical CharacteristicsIts …
T-AMP 2 x 15W TA2024 Digital Audio Amplifier Board Mini AMPRead More
Mega 2560 R3 ATmega2560-16AU Control Module without USB Cable
$44.54Motherboard & Development BoardAdd to cartDescriptionThis is compatible R3 Mega2560 ATmega2560-16AU control board without USB cableMega is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal …
Mega 2560 R3 ATmega2560-16AU Control Module without USB CableRead More
20W 420*380*3mm Folding PET Monocrystalline Silicon Solar Panel with Cable Dual USB
$93.62Smart Robot & Solar PanelAdd to cartSpecificationsMaximum Power(Pmax):20WOpen Circuit Voltage(Voc):18VMaximum Power Voltage(Vmp):12vMaximum Power Current(Imp):1.1AMaximum System Voltage(Imp):1000vOutput:USB 5V & DC 18VQuantity of cell:36Cell Effcience %:20%Output Tolerance:±10%Size:425*380*3mmStandard Test Conditions:Irradiance 1000w/m2Temoerature 25.C,AM=1.5Package Included1 x Solar panel with cable
5pcs 8Channel DC 5V RS485 Modbus RTU Control Module UART Relay Switch Board PLC
$45.10Relay ModuleAdd to cartDescriptions– Operating Voltage:DC 5V(5V Version)– Operating Current:10-15MA– inchopeninch inchcloseinch inchMomentaryinch inchSelf-lockinginch inchInterlockinch inchDelayinch 6 Commands– Two instruction-control mode:AT command and MODBUS command– Under the AT command ,the maximum delay is 9999 seconds– Under the MODBUS command ,the maximum delay is 255 seconds– AT commands can be made serial HyperTerminal (serial assistant) Enter;– MODBUS commands can …
5pcs 8Channel DC 5V RS485 Modbus RTU Control Module UART Relay Switch Board PLCRead More
LT1083cp 7A AC 35V Rectifier Filter Power Supply Board DIY Home theater Sound Amplifier Voltage Regulator
$24.04Power Supply ModuleAdd to cartDescriptionLT1083CP feature description (emphasis):It is a linear step-down block. Although the voltage adjustment can be adjusted from 2.5V to 37V, it is recommended that the working differential pressure is within 10V, because the power consumption is proportional to the differential pressure, the greater the differential pressure, the more heat The larger the output current, the …
Reviews
There are no reviews yet.