JDY-40 2.4G Wireless Serial Port Transmission And Transceiver integrated Remote Communication Module
$6.55
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
JDY-40 is developed with 2.4G technology, the sight distance is 120 meters, using serial port communication interface, using simple and fast, only need to understand the serial knowledge of the JDY-40 can be applied to the product!
Pin function description
Pin:The name of the discipline:Function
1:GPI01:Input-output IO, which can be configured by AT+CLSS
2:GPI02:Input-output IO, which can be configured by AT+CLSS
3:GPI03:Input-output IO, which can be configured by AT+CLSS
4:GPI04:Input-output IO, which can be configured by AT+CLSS
5:GPI05:Input-output IO, which can be configured by AT+CLSS
6:GPI06:Input-output IO, which can be configured by AT+CLSS
7:GPI07:Input-output IO, which can be configured by AT+CLSS
8:GPI08:Input-output IO, which can be configured by AT+CLSS
9:VCC:Power supply (2.2-3.6)
10:RXD:Serial port input pin
11:TXD:Serial port output pin
12:SET:AT command switching pin (low level AT instruction, high level transparent transmission)
13:CS:Transmission or push button mode:CS pin (low level wake-up, high level sleep).
IO receive mode:the CS pin needs to be suspended or pulled up
14:GND:Power supply
Application scene
1:2.4G panel switch
2:2.4G remote control
3:2.4G transmission
4:one to many control of mobile phone
5:IO switching control
6:2.4G toys
7:smart home control application
Technical parameter
Model:JDY-40
Working band:2.4G
Emissive power:Maximum 12dB
working temperature:-40 C – 80 C
Reception sensitivity:-97db
transmission distance:120 meters
working voltage:2.2V-3.6V
TX current:40mA
RX current:24mA
Sleep current:5uA
communication interface:Standard TTL serial port
Default configuration
Specification:Function:Parameter:Instructions
1:baud rate:9600:AT+BAUD
2:wireless ID:8899:AT+RFID8899
3:device ID:1122:AT+DVID1122
4:channel:001:AT+RFC001
5:emissive power:12db:AT+POWE9
6:equipment type:A0:AT+CLSSA0
Communication
it is necessary to configure the RFC, DVID, and RFID that need the communication module to be the same. The module and the module can communicate. When the module comes out, the parameters are all unified, and the user can configure it according to its own needs.
AT instruction instructions
Specifically, the JDY-40 module needs to add the ending symbol rn to send the AT instruction.
Set / query – baud rate
instructions:response:response
AT+BAUD
OK:Param(1-7)
1:1200
2:2400
3:4800
4:9600
5:14400
6:19200
Default value:4
AT+BAUD
+BAUD=
Set / query -RFID
instructions:response:response
AT+RFID:OK:Param(0000-FFFF)
Default value:8899
AT+RFID:+BAUD=
Set / query -DVID
instructions:response:response
AT+DVID:OK:Param(0000-FFFF)
Default value:8899
AT+DVID:+BAUD=
Set / query -RFC
instructions:response:response
AT+RFC:OK:Param(001-128)
Default value:001
AT+RFC:+RFC=
Set / query -POWE
instructions:response:response
AT+POWE
OK:Param(0-9)
0:-25db
1:-15db
2:-5db
3:0db
4:+3db
5:+6db
6:+9db
7:+10db
8:+10db
9:+12db
Default value:9
AT+POWE
+POWE=
Set / query -CLSS
instructions:response:response
AT+CLSS
OK:Param
A0:serial port transmission (transceiver)
C0:remote control or IO button with indicator (transmitter).
C 1:remote control or IO button without indicator (transmitter).
C 2:IO normally high level, after receiving the signal, low level, delay.
High level after 30mS
C 3:IO is usually low level, after receiving the signal, the high level has been
Recovery of low level after delayed 30mS
C 4:IO is usually low level, and receives the high level of the pressed signal.
Receive raised signal low level
The IO level is reversed when the C 5:IO receives the pressed signal.
Default value:A0
AT+CLSS
+CLSS=
Package included
1 x JDY-40 2.4G Wireless Serial Port Transmission And Transceiver Integrated Remote Communication Module
Weight | 0.012 kg |
---|
Customers Also Viewed
10pcs 433MHZ ASK Wireless Transmission Module TX11 High Power Module infinite Emission Circuit Board
$19.40Smart ModuleAdd to cartFeatures(1) The transmission power is large, and the transmission power is greater than 30 mW;(2) Wide operating voltage, 2.5V-9V;(3) Operating frequency:433.92 MHz(4) Using SAW frequency stabilization (+-75KHZ), the working frequency is stable;(5) With the RXB8 receiving module, the distance can reach 800 meters;(6) Static power consumption Low emission is current consumption:10mA, there is basically no …
SZWENGAO WG8-40S1210 8-40V to 12V 10A Automatic Buck Boost Power Converter Car Voltage Regulator Step Down Step Up Module
$39.35Boost & Buck ModuleAdd to cartFeatures*Designed according to CE/RoHS*100% full power, high stability output*100% full load aging test*Imported components*Imported high-quality thermal silica gel potting, waterproof, dustproof and shockproof* Die-cast aluminum alloy shell, small size, simple installation*Internal protection functions such as over current, low voltage, over temperature, short circuit, reverse connection, etc.*Wide voltage input, high conversion efficiency of 88-90%*Long service life …
10Pcs Wemos DS18B20 Module for D1 Mini DS18B20 Temperature Measurement Sensor Module
$36.17Sensor & Detector ModuleAdd to cartFeatures1. Supporting the D1 MINI2. The Ar-duino compatible, using A-rduino IDE for programming3. 11 the XI/O pins4. 1 XADC pin (0-3.3V)5. Support the OTA onlinePackage included10 x DS18B20 Module20 x Long female pin20 x Short female pin20 x Normal pin
ASK Wireless Receiving Module with Decoding EV1527 Encoding Transmitter
$10.92Smart ModuleAdd to cartFeaturesThe latest anti-lost code self-recovery function solves the trouble of losing code.The latest anti-interference software is involved to prevent accidental startWidely compatible, PT2262, PT2260, EV1527, PT2240, etc.Ultra-wide pulse width range:105 to 515 oscillating resistorsIn jog mode:support combination codeSelf-locking mode:support combination codeIn the interlock mode:4 independent open and close, the combination code is closedYou can learn …
ASK Wireless Receiving Module with Decoding EV1527 Encoding TransmitterRead More
50W 18V Monocrystaline Al-Alloy at back Solar Panel Dual 12V/5V DC USB Charger for Car RV Boat
$88.07Smart Robot & Solar PanelAdd to cartFeatures– EVA+PET at front panel and Al-Alloy at back, light-weight but durable.– USB and DC output interface for more purpose.– Equipped with 12V DC5.5×2.1 & 5V USB output interface.– Dedicated for 12V battery and 5V device charging. – High output 3000mAh USB, can full-charge an iX in 1.5h in max power.– Mono-crystalline solar Cell with …
Reviews
There are no reviews yet.