JDY-40 2.4G Wireless Serial Port Transmission And Transceiver integrated Remote Communication Module
$6.55
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
JDY-40 is developed with 2.4G technology, the sight distance is 120 meters, using serial port communication interface, using simple and fast, only need to understand the serial knowledge of the JDY-40 can be applied to the product!
Pin function description
Pin:The name of the discipline:Function
1:GPI01:Input-output IO, which can be configured by AT+CLSS
2:GPI02:Input-output IO, which can be configured by AT+CLSS
3:GPI03:Input-output IO, which can be configured by AT+CLSS
4:GPI04:Input-output IO, which can be configured by AT+CLSS
5:GPI05:Input-output IO, which can be configured by AT+CLSS
6:GPI06:Input-output IO, which can be configured by AT+CLSS
7:GPI07:Input-output IO, which can be configured by AT+CLSS
8:GPI08:Input-output IO, which can be configured by AT+CLSS
9:VCC:Power supply (2.2-3.6)
10:RXD:Serial port input pin
11:TXD:Serial port output pin
12:SET:AT command switching pin (low level AT instruction, high level transparent transmission)
13:CS:Transmission or push button mode:CS pin (low level wake-up, high level sleep).
IO receive mode:the CS pin needs to be suspended or pulled up
14:GND:Power supply
Application scene
1:2.4G panel switch
2:2.4G remote control
3:2.4G transmission
4:one to many control of mobile phone
5:IO switching control
6:2.4G toys
7:smart home control application
Technical parameter
Model:JDY-40
Working band:2.4G
Emissive power:Maximum 12dB
working temperature:-40 C – 80 C
Reception sensitivity:-97db
transmission distance:120 meters
working voltage:2.2V-3.6V
TX current:40mA
RX current:24mA
Sleep current:5uA
communication interface:Standard TTL serial port
Default configuration
Specification:Function:Parameter:Instructions
1:baud rate:9600:AT+BAUD
2:wireless ID:8899:AT+RFID8899
3:device ID:1122:AT+DVID1122
4:channel:001:AT+RFC001
5:emissive power:12db:AT+POWE9
6:equipment type:A0:AT+CLSSA0
Communication
it is necessary to configure the RFC, DVID, and RFID that need the communication module to be the same. The module and the module can communicate. When the module comes out, the parameters are all unified, and the user can configure it according to its own needs.
AT instruction instructions
Specifically, the JDY-40 module needs to add the ending symbol rn to send the AT instruction.
Set / query – baud rate
instructions:response:response
AT+BAUD
OK:Param(1-7)
1:1200
2:2400
3:4800
4:9600
5:14400
6:19200
Default value:4
AT+BAUD
+BAUD=
Set / query -RFID
instructions:response:response
AT+RFID:OK:Param(0000-FFFF)
Default value:8899
AT+RFID:+BAUD=
Set / query -DVID
instructions:response:response
AT+DVID:OK:Param(0000-FFFF)
Default value:8899
AT+DVID:+BAUD=
Set / query -RFC
instructions:response:response
AT+RFC:OK:Param(001-128)
Default value:001
AT+RFC:+RFC=
Set / query -POWE
instructions:response:response
AT+POWE
OK:Param(0-9)
0:-25db
1:-15db
2:-5db
3:0db
4:+3db
5:+6db
6:+9db
7:+10db
8:+10db
9:+12db
Default value:9
AT+POWE
+POWE=
Set / query -CLSS
instructions:response:response
AT+CLSS
OK:Param
A0:serial port transmission (transceiver)
C0:remote control or IO button with indicator (transmitter).
C 1:remote control or IO button without indicator (transmitter).
C 2:IO normally high level, after receiving the signal, low level, delay.
High level after 30mS
C 3:IO is usually low level, after receiving the signal, the high level has been
Recovery of low level after delayed 30mS
C 4:IO is usually low level, and receives the high level of the pressed signal.
Receive raised signal low level
The IO level is reversed when the C 5:IO receives the pressed signal.
Default value:A0
AT+CLSS
+CLSS=
Package included
1 x JDY-40 2.4G Wireless Serial Port Transmission And Transceiver Integrated Remote Communication Module
Weight | 0.012 kg |
---|
Customers Also Viewed
20Pcs Serial Port WIFI ESP8266 Module Adapter Plate with IO Lead Out for ESP-07 ESP-08 ESP-12
$12.02Smart ModuleAdd to cart20Pcs Serial Port WIFI ESP8266 Module Adapter Plate With IO Lead Out For ESP-07 ESP-08 ESP-12This Adapter Plate is for ESP-07 ESP-08 ESP-12, a test board with IO lead out.NoteNeed to solder 3V regulator by youself.ESP-07, ESP-08, ESP-12 module board are not included!!!Package included20 x Serial Port WIFI ESP8266 Module Adapter Plate40 x Pins
20pcs 5V Low Level Trigger one 1 Channel Relay Module interface Board Shield DC AC 220V
$35.99Relay ModuleAdd to cartFeaturesWith isolation groove in control area and load area.With power and relay action indication, bright when connect and go off when disconnects.When there is a signal in signal input, public side and common side will breakover.It can be not only used as a microcontroller development board module, but also as a home appliance control.It can …
20pcs 5V Low Level Trigger one 1 Channel Relay Module interface Board Shield DC AC 220VRead More
10pcs DC 3V Watering Small Water Pump Silent Mini Water Pump
$26.77Other Module BoardAdd to cartFeatureAmbient temperature:-20 ° C ~ 60 ° CUse ambient humidityUse medium:water, non-flammable fluid liquidUse scene:medical, fountain, etc.Life:>=200H (continuous work)Motor model:140 type 5500RPM/MINModel:Voltage Scope (DC):Current (A):Power (W):Max. Water Head (M):Max. Flow Rate (L/H):Starting Voltage:Waterproof GradeJT-DC3W-3:3V:0.12:0.36:0.35:80:1:IP68Package includes10 x Water Pump
3Pcs I2C WiiChuck Nunchuck Small Adapter Shield Module Board
$6.63Sensor & Detector ModuleAdd to cartSpecificationWiichuck is a board for Wii-Nunchuck.Use this shield to achieve communication between nunchuck with for without broking the controller for Wii Nunchuck.It is grate for DIY projects.Dimensions:1.02 in x 0.47 in x 0.28 in (2.6 cm x 1.2 cm x 0.7 cm)Package includes3 x Adapter Module
5Pcs YS-U12S5H AC to DC 5V 2A Switching Power Supply Module AC to DC Converter 10W Regulated Power Supply
$37.17Power Supply ModuleAdd to cart>>>Manual:Click here to openFeatures-Universal voltage input:AC100-265V AC-With overload, short circuit, over temperature protection function-Full load aging test-Ultra low output rippleSpecificationsModel:YS-U12S5HOutput characteristics:Output voltage:5VRated current:2000mACurrent range:0-2000mARippleOutput accuracy:÷1%Voltage regulation rate:÷1%Load regulation rate:÷1%Rated power:10WAdjustable output range:/Setup, rise, hold time:300ms、20ms、20ms/220VACInput characteristics:Input voltage range:AC100-264VInput currentFrequency range:47Hz-63HzEffectiveness:>83.5%Start impact circuit:COLD STARTLeakage currentProtection characteristics:Over power protection:150-170% rated power, automatic recovery after fault removalOver voltage …
CBB60 5Pcs 50UF 450V Water Pump Motor Run Capacitor
$64.03Module ComponentsAdd to cartFeaturesCBB60 Capacitors takes heavy-edge metallized Al/Zn PP film or web-like fuse film as dielectric. Its components are sealed with flame-retardant epoxy resin. It has cylindric outline with high reliability and stability.CBB60 capacitor has features of small size, light weight, small tangent in waste angle, and good self-concrescence. Applicable to startand operation with 50/60Hz. A. C …
CBB60 5Pcs 50UF 450V Water Pump Motor Run CapacitorRead More
20pcs ZFX-W1302 Digital thermostat Controller Temperature Controlling Temperature Meter for Automatic incubator
$172.94Test & Measuring ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.SpecificationsModel:ZFX-W1302Material:PVCPower Supply:DC 9-24VTemperature Measurement:-50 C – 120 CTemperature Control:0 C – 110 CTemperature Control:0.1 CDisplay Color:RedSensor:NTC B3435 10KSensor Cable Length:1MSize:99 * 43 * 22.6mmSetting Steps1. Short press the ‘Set’ key, the screen …
Reviews
There are no reviews yet.