5pcs JDY-40 2.4G Wireless Serial Port Transmission And Transceiver integrated Remote Communication Module
$16.11
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
JDY-40 is developed with 2.4G technology, the sight distance is 120 meters, using serial port communication interface, using simple and fast, only need to understand the serial knowledge of the JDY-40 can be applied to the product!
Pin function description
Pin:The name of the discipline:Function
1:GPI01:Input-output IO, which can be configured by AT+CLSS
2:GPI02:Input-output IO, which can be configured by AT+CLSS
3:GPI03:Input-output IO, which can be configured by AT+CLSS
4:GPI04:Input-output IO, which can be configured by AT+CLSS
5:GPI05:Input-output IO, which can be configured by AT+CLSS
6:GPI06:Input-output IO, which can be configured by AT+CLSS
7:GPI07:Input-output IO, which can be configured by AT+CLSS
8:GPI08:Input-output IO, which can be configured by AT+CLSS
9:VCC:Power supply (2.2-3.6)
10:RXD:Serial port input pin
11:TXD:Serial port output pin
12:SET:AT command switching pin (low level AT instruction, high level transparent transmission)
13:CS:Transmission or push button mode:CS pin (low level wake-up, high level sleep).
IO receive mode:the CS pin needs to be suspended or pulled up
14:GND:Power supply
Application scene
1:2.4G panel switch
2:2.4G remote control
3:2.4G transmission
4:one to many control of mobile phone
5:IO switching control
6:2.4G toys
7:smart home control application
Technical parameter
Model:JDY-40
Working band:2.4G
Emissive power:Maximum 12dB
working temperature:-40 C – 80 C
Reception sensitivity:-97db
transmission distance:120 meters
working voltage:2.2V-3.6V
TX current:40mA
RX current:24mA
Sleep current:5uA
communication interface:Standard TTL serial port
Default configuration
sequence:function:parameter:instructions
1:baud rate:9600:AT+BAUD
2:wireless ID:8899:AT+RFID8899
3:device ID:1122:AT+DVID1122
4:channel:001:AT+RFC001
5:emissive power:12db:AT+POWE9
6:equipment type:A0:AT+CLSSA0
Communication
it is necessary to configure the RFC, DVID, and RFID that need the communication module to be the same. The module and the module can communicate. When the module comes out, the parameters are all unified, and the user can configure it according to its own needs.
AT instruction instructions
Specifically, the JDY-40 module needs to add the ending symbol rn to send the AT instruction.
Set / query – baud rate
instructions:response:response
AT+BAUD
OK:Param(1-7)
1:1200
2:2400
3:4800
4:9600
5:14400
6:19200
Default value:4
AT+BAUD
+BAUD=
Set / query -RFID
instructions:response:response
AT+RFID:OK:Param(0000-FFFF)
Default value:8899
AT+RFID:+BAUD=
Set / query -DVID
instructions:response:response
AT+DVID:OK:Param(0000-FFFF)
Default value:8899
AT+DVID:+BAUD=
Set / query -RFC
instructions:response:response
AT+RFC:OK:Param(001-128)
Default value:001
AT+RFC:+RFC=
Set / query -POWE
instructions:response:response
AT+POWE
OK:Param(0-9)
0:-25db
1:-15db
2:-5db
3:0db
4:+3db
5:+6db
6:+9db
7:+10db
8:+10db
9:+12db
Default value:9
AT+POWE
+POWE=
Set / query -CLSS
instructions:response:response
AT+CLSS
OK:Param
A0:serial port transmission (transceiver)
C0:remote control or IO button with indicator (transmitter).
C 1:remote control or IO button without indicator (transmitter).
C 2:IO normally high level, after receiving the signal, low level, delay.
High level after 30mS
C 3:IO is usually low level, after receiving the signal, the high level has been
Recovery of low level after delayed 30mS
C 4:IO is usually low level, and receives the high level of the pressed signal.
Receive raised signal low level
The IO level is reversed when the C 5:IO receives the pressed signal.
Default value:A0
AT+CLSS
+CLSS=
Package included
5 x JDY-40 2.4G Wireless Serial Port Transmission And Transceiver Integrated Remote Communication Module
Weight | 0.06 kg |
---|
Customers Also Viewed
10pcs MAX9814 High Performance Microphone AGC Amplifier Module CMA-4544PF-W
$90.79Amplifier BoardAdd to cartSpecifications– Supply Voltage:2.7v-5.5v @ 3mA current– Output:2Vpp on 1.25V bias– Frequency Response:20Hz – 20KHz– Programmable Attack and Release Ratio– Automatic gain, selectable max from 40dB, 50dB or 60dB– Low Input-Referred Noise Density of 30nV/– Low THD:0.04% (typ)– Low Power Shutdown Mode– Built-in 2V low-noise microphone bias– -40°C ~ +85°C extended temperature rangePackage included10 x Microphone …
10pcs MAX9814 High Performance Microphone AGC Amplifier Module CMA-4544PF-WRead More
T-AMP 2 x 15W TA2024 Digital Audio Amplifier Board Mini AMP
$19.04Amplifier BoardAdd to cartFeature1. The power to more than 12V current 3A2. The speaker is best to use an impedance of 4 ohms, some of the high sensitivity3. For some signal level is relatively low tone, to add the preamplifier to play the effect4. Note the positive and negative can not be reversed, use the power supplyElectrical CharacteristicsIts …
T-AMP 2 x 15W TA2024 Digital Audio Amplifier Board Mini AMPRead More
Mega 2560 R3 ATmega2560-16AU Control Module without USB Cable
$44.54Motherboard & Development BoardAdd to cartDescriptionThis is compatible R3 Mega2560 ATmega2560-16AU control board without USB cableMega is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal …
Mega 2560 R3 ATmega2560-16AU Control Module without USB CableRead More
20W 420*380*3mm Folding PET Monocrystalline Silicon Solar Panel with Cable Dual USB
$93.62Smart Robot & Solar PanelAdd to cartSpecificationsMaximum Power(Pmax):20WOpen Circuit Voltage(Voc):18VMaximum Power Voltage(Vmp):12vMaximum Power Current(Imp):1.1AMaximum System Voltage(Imp):1000vOutput:USB 5V & DC 18VQuantity of cell:36Cell Effcience %:20%Output Tolerance:±10%Size:425*380*3mmStandard Test Conditions:Irradiance 1000w/m2Temoerature 25.C,AM=1.5Package Included1 x Solar panel with cable
5pcs 8Channel DC 5V RS485 Modbus RTU Control Module UART Relay Switch Board PLC
$45.10Relay ModuleAdd to cartDescriptions– Operating Voltage:DC 5V(5V Version)– Operating Current:10-15MA– inchopeninch inchcloseinch inchMomentaryinch inchSelf-lockinginch inchInterlockinch inchDelayinch 6 Commands– Two instruction-control mode:AT command and MODBUS command– Under the AT command ,the maximum delay is 9999 seconds– Under the MODBUS command ,the maximum delay is 255 seconds– AT commands can be made serial HyperTerminal (serial assistant) Enter;– MODBUS commands can …
5pcs 8Channel DC 5V RS485 Modbus RTU Control Module UART Relay Switch Board PLCRead More
LT1083cp 7A AC 35V Rectifier Filter Power Supply Board DIY Home theater Sound Amplifier Voltage Regulator
$24.04Power Supply ModuleAdd to cartDescriptionLT1083CP feature description (emphasis):It is a linear step-down block. Although the voltage adjustment can be adjusted from 2.5V to 37V, it is recommended that the working differential pressure is within 10V, because the power consumption is proportional to the differential pressure, the greater the differential pressure, the more heat The larger the output current, the …
Reviews
There are no reviews yet.