5pcs JDY-40 2.4G Wireless Serial Port Transmission And Transceiver integrated Remote Communication Module
$16.11
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
JDY-40 is developed with 2.4G technology, the sight distance is 120 meters, using serial port communication interface, using simple and fast, only need to understand the serial knowledge of the JDY-40 can be applied to the product!
Pin function description
Pin:The name of the discipline:Function
1:GPI01:Input-output IO, which can be configured by AT+CLSS
2:GPI02:Input-output IO, which can be configured by AT+CLSS
3:GPI03:Input-output IO, which can be configured by AT+CLSS
4:GPI04:Input-output IO, which can be configured by AT+CLSS
5:GPI05:Input-output IO, which can be configured by AT+CLSS
6:GPI06:Input-output IO, which can be configured by AT+CLSS
7:GPI07:Input-output IO, which can be configured by AT+CLSS
8:GPI08:Input-output IO, which can be configured by AT+CLSS
9:VCC:Power supply (2.2-3.6)
10:RXD:Serial port input pin
11:TXD:Serial port output pin
12:SET:AT command switching pin (low level AT instruction, high level transparent transmission)
13:CS:Transmission or push button mode:CS pin (low level wake-up, high level sleep).
IO receive mode:the CS pin needs to be suspended or pulled up
14:GND:Power supply
Application scene
1:2.4G panel switch
2:2.4G remote control
3:2.4G transmission
4:one to many control of mobile phone
5:IO switching control
6:2.4G toys
7:smart home control application
Technical parameter
Model:JDY-40
Working band:2.4G
Emissive power:Maximum 12dB
working temperature:-40 C – 80 C
Reception sensitivity:-97db
transmission distance:120 meters
working voltage:2.2V-3.6V
TX current:40mA
RX current:24mA
Sleep current:5uA
communication interface:Standard TTL serial port
Default configuration
sequence:function:parameter:instructions
1:baud rate:9600:AT+BAUD
2:wireless ID:8899:AT+RFID8899
3:device ID:1122:AT+DVID1122
4:channel:001:AT+RFC001
5:emissive power:12db:AT+POWE9
6:equipment type:A0:AT+CLSSA0
Communication
it is necessary to configure the RFC, DVID, and RFID that need the communication module to be the same. The module and the module can communicate. When the module comes out, the parameters are all unified, and the user can configure it according to its own needs.
AT instruction instructions
Specifically, the JDY-40 module needs to add the ending symbol rn to send the AT instruction.
Set / query – baud rate
instructions:response:response
AT+BAUD
OK:Param(1-7)
1:1200
2:2400
3:4800
4:9600
5:14400
6:19200
Default value:4
AT+BAUD
+BAUD=
Set / query -RFID
instructions:response:response
AT+RFID:OK:Param(0000-FFFF)
Default value:8899
AT+RFID:+BAUD=
Set / query -DVID
instructions:response:response
AT+DVID:OK:Param(0000-FFFF)
Default value:8899
AT+DVID:+BAUD=
Set / query -RFC
instructions:response:response
AT+RFC:OK:Param(001-128)
Default value:001
AT+RFC:+RFC=
Set / query -POWE
instructions:response:response
AT+POWE
OK:Param(0-9)
0:-25db
1:-15db
2:-5db
3:0db
4:+3db
5:+6db
6:+9db
7:+10db
8:+10db
9:+12db
Default value:9
AT+POWE
+POWE=
Set / query -CLSS
instructions:response:response
AT+CLSS
OK:Param
A0:serial port transmission (transceiver)
C0:remote control or IO button with indicator (transmitter).
C 1:remote control or IO button without indicator (transmitter).
C 2:IO normally high level, after receiving the signal, low level, delay.
High level after 30mS
C 3:IO is usually low level, after receiving the signal, the high level has been
Recovery of low level after delayed 30mS
C 4:IO is usually low level, and receives the high level of the pressed signal.
Receive raised signal low level
The IO level is reversed when the C 5:IO receives the pressed signal.
Default value:A0
AT+CLSS
+CLSS=
Package included
5 x JDY-40 2.4G Wireless Serial Port Transmission And Transceiver Integrated Remote Communication Module
Weight | 0.06 kg |
---|
Customers Also Viewed
Multiple Car Toys Magnetic Puzzle Box Book Educational Book Kids Learning Gift
$52.64MathematicsAdd to cartPackage included10 x Card76 x MagnetsFeatures1.Developing kids’ intelligence.2.Teaching kids to know more words.3.Easy for storage.SpecificationsColor:MulticolorMaterial:Paperboard, MagnetismSize:30x4x21.5cm
Basic Starter Kit UNO R3 Mini Breadboard LED Jumper Wire Button with Box for Geekcreit for Arduino – products that work with official Arduino boards
$18.62Module KitsAdd to cartDescriptionsPerfect for Shield Prototyping and TestingPlastic housing, metal contact clipsAccept wire with diameter 20-29AWGVolatge/current:300V/3-5A400 tie-point2 Power Lanes, Tie-point 1001 Double-strip, Tie-point 300Solderless Breadboard Size:82x55x8.5mmPackage included1 x Uno R3 Development Board1x 400 hole Breadboard10 x 220Ω resistor 5% carbon film10 x 1k resistor 5% carbon film10 x 10k resistor 5% carbon film10 x 100k resistor 5% …
3pcs ESP32-S WiFi + Bluetooth ESP32S Serial to WiFi Dual Antenna Module
$29.27Smart ModuleAdd to cartDescriptionThe main chip uses a low-power dual-core 32-bit CPU with a frequency of up to 240MHz and computing power of up to 600DMIPS.Default 32Mbit SPI Flash, 520KB SRAMSupport SoftAP and Station modeUltra-small 802.11b/g/n Wi-Fi + BT/BLE SoC moduleSupport UART/SPI/I2C/I2S/PWM/ADC/DAC, etc.Support for firmware upgrade (FOTA)Antenna supports onboard antenna or IPEX block outputPackage includes3 x Wifi module
Geekcreit 433MHz DC 12V 10A Relay 1CH Channel Wireless RF Remote Control Switch Transmitter with Receiver
$15.30Smart ModuleAdd to cartIf you need more Transmitter, please buy Product ID:1215079>>>Manual:Click here to openFeaturesEasy to install and easy to carryWith a slidable cover on the remote controlWith a hook on the remote controlUse Learning coding, stable and reliableThe wireless signal can pass through walls, floors and doorsYou can turn on or turn off the receiver with transmitter …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStream
$56.69Electrical Pump & ValveAdd to cartFeature*CO2 Refill Adapter is used to fill CO2 into your Sodastream tank.*Adjustable valve pin ensures compatibility with any cylinder valve variation.*Easy to install and use.*Made of high quality metal, high hardness and durable.Specification*Material:Metal*Color:Silver (As Pictures Show)*Inner Thread:TR21-4*Outer Thread:W21.8-14Package Contents1*CO2 Refill AdapterNotes:The real color of the item may be slightly different from the pictures shown on …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStreamRead More
30pcs 2.5-5.5V TTP223 Capacitive Touch Switch Button Self Lock Module
$15.15Other Module BoardAdd to cartFeatures 1. Size:15*11mm 2. Power:2.5-5.5V 3.Trigger setting mode:(1->Short;0->No Short) AB=00:No-lock High TTL level output; AB=01:Self-lock High TTL level output; AB=10:No-lock Low TTL level output; AB=11:Self-lock Low TTL level output; Package included 30 x 2.5-5.5V TTP223 Capacitive Touch Switch Button Self-Lock Module For
NE555 Pulse Module LM358 Duty and Frequency Adjustable Square Wave Signal Generator Upgrade Version
$6.55Test & Measuring ModuleAdd to cartFeature1. Used as a square wave signal generator to generate square wave signals for experimental development.2. Used to generate a square wave signal that drives the stepper motor driver.3. Generate adjustable pulses for use by the MCU.4. Generate adjustable pulses to control the associated circuitry.Description1. Size:3.5CM * 4.6CM1. The main chip:LM358;2. Input voltage:5V-12VDC.3. Input current:≥100MA;4. …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module Kit
$13.73DIY Electronic KitsAdd to cartFeatureModel:AUL-10Supply voltage:DC9V-12VAudio input:0~1.5VrmsPCB size:66 x 28mm (L x W)Light row size:62.5 x 5 x 10.7mm (L x W x H)Two indication modes:bar indication and fire spot indication (Realized by MOD short-circuit point)Lamp row offers two kinds of vertical and horizontal installationTin-treated solder padsNote:Before power on, please confirm the polarity of the power supply is correct …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module KitRead More
Reviews
There are no reviews yet.