3pcs JDY-40 2.4G Wireless Serial Port Transmission And Transceiver integrated Remote Communication Module

Description
JDY-40 is developed with 2.4G technology, the sight distance is 120 meters, using serial port communication interface, using simple and fast, only need to understand the serial knowledge of the JDY-40 can be applied to the product!
Pin function description
Pin:The name of the discipline:Function
1:GPI01:Input-output IO, which can be configured by AT+CLSS
2:GPI02:Input-output IO, which can be configured by AT+CLSS
3:GPI03:Input-output IO, which can be configured by AT+CLSS
4:GPI04:Input-output IO, which can be configured by AT+CLSS
5:GPI05:Input-output IO, which can be configured by AT+CLSS
6:GPI06:Input-output IO, which can be configured by AT+CLSS
7:GPI07:Input-output IO, which can be configured by AT+CLSS
8:GPI08:Input-output IO, which can be configured by AT+CLSS
9:VCC:Power supply (2.2-3.6)
10:RXD:Serial port input pin
11:TXD:Serial port output pin
12:SET:AT command switching pin (low level AT instruction, high level transparent transmission)
13:CS:Transmission or push button mode:CS pin (low level wake-up, high level sleep).
IO receive mode:the CS pin needs to be suspended or pulled up
14:GND:Power supply
Application scene
1:2.4G panel switch
2:2.4G remote control
3:2.4G transmission
4:one to many control of mobile phone
5:IO switching control
6:2.4G toys
7:smart home control application
Technical parameter
Model:JDY-40
Working band:2.4G
Emissive power:Maximum 12dB
working temperature:-40 C – 80 C
Reception sensitivity:-97db
transmission distance:120 meters
working voltage:2.2V-3.6V
TX current:40mA
RX current:24mA
Sleep current:5uA
communication interface:Standard TTL serial port
Default configuration
sequence:function:parameter:instructions
1:baud rate:9600:AT+BAUD
2:wireless ID:8899:AT+RFID8899
3:device ID:1122:AT+DVID1122
4:channel:001:AT+RFC001
5:emissive power:12db:AT+POWE9
6:equipment type:A0:AT+CLSSA0
Communication
it is necessary to configure the RFC, DVID, and RFID that need the communication module to be the same. The module and the module can communicate. When the module comes out, the parameters are all unified, and the user can configure it according to its own needs.
AT instruction instructions
Specifically, the JDY-40 module needs to add the ending symbol rn to send the AT instruction.
Set / query – baud rate
instructions:response:response
AT+BAUD

OK:Param(1-7)
1:1200
2:2400
3:4800
4:9600
5:14400
6:19200
Default value:4
AT+BAUD
+BAUD=
Set / query -RFID
instructions:response:response
AT+RFID:OK:Param(0000-FFFF)
Default value:8899
AT+RFID:+BAUD=
Set / query -DVID
instructions:response:response
AT+DVID:OK:Param(0000-FFFF)
Default value:8899
AT+DVID:+BAUD=
Set / query -RFC
instructions:response:response
AT+RFC:OK:Param(001-128)
Default value:001
AT+RFC:+RFC=
Set / query -POWE
instructions:response:response
AT+POWE

OK:Param(0-9)
0:-25db
1:-15db
2:-5db
3:0db
4:+3db
5:+6db
6:+9db
7:+10db
8:+10db
9:+12db
Default value:9
AT+POWE
+POWE=
Set / query -CLSS
instructions:response:response
AT+CLSS

OK:Param
A0:serial port transmission (transceiver)
C0:remote control or IO button with indicator (transmitter).
C 1:remote control or IO button without indicator (transmitter).
C 2:IO normally high level, after receiving the signal, low level, delay.
High level after 30mS
C 3:IO is usually low level, after receiving the signal, the high level has been
Recovery of low level after delayed 30mS
C 4:IO is usually low level, and receives the high level of the pressed signal.
Receive raised signal low level
The IO level is reversed when the C 5:IO receives the pressed signal.
Default value:A0
AT+CLSS
+CLSS=
Package included
3 x JDY-40 2.4G Wireless Serial Port Transmission And Transceiver Integrated Remote Communication Module