SMATRUL Black Smart WIFI 1Gang Touch Switch Light
Shipping:Standard Shipping about 10-25 business days
Wireless switch specification
1, working voltage:DC 3V
2, working frequency:433.92MHZ
3. Transmitting power
4. Remote control distance
5, working method:wireless remote control
6, coding method:learning code
7, modulation method:ASK
8, working temperature:-10 deg C ~ +70 deg C
9, size:86 * 86 *15 (mm)
10. use 1PC CR2032 Alkaline Battery ( Not Included Battery),The service life is about 12 months. Life and frequency of use are related. Time may be longer
1. Press and hold the controller for 3 seconds to enter the code matching mode (the code indicator light flashes 5 times).
At this time, press the wireless switch 2 times and wait for 2 seconds. The code is successful (the default is always on);
Clear the signal
Press and hold the controller for 10 seconds to clear the code (the code indicator flashes 10 times);
1.One controller can be equipped with 15 switches, one switch can be equipped with many controllers
2. Do not operate with power. Turn off the power supply and operate it. If the test is confirmed to be correct, use it under the guidance of a professional electrician.
3. When the voltage of the remote control is insufficient, please change the battery in time (the remote control distance becomes closer when the remote control battery voltage is insufficient).
4. When using wireless electronic products, care should be taken to avoid metal masks, large electronic devices, electromagnetic fields, etc., which have strong interference sources, to avoid remote control and short receiving distance or to work normally.
5. Do not use this electronic product abnormally. Abnormal use will reduce product performance and longevity. In severe cases, damage to the product will also pose a safety hazard.
1 x Wireless switch(Black,1Gang)
( Not Included Controller)
Customers Also Viewed
DIY LED Light Set Kit for Lego 10248 for F40 Car Building Blocks Lighting Parts$29.15DIY Electronic KitsAdd to cart
SpecificationsMaterial:PlasticFit:for Lego 10248 F40Interface:USBNote:Please allow a little color variation for different display setting. The pictures are only for reference, please make the object as the standard. Thank you for your understanding!Package included1 x LED Light Kit (car model Not included)
Keyes Brick Passive Buzzer Module (pad hole) with Pin Header Square Wave Frequency 2KHz$3.89Sensor & Detector ModuleAdd to cart
DescriptionThis is a commonly used passive buzzer module, it mainly uses 12*8.5MM 5V 2K without source buzzer component. There is no oscillating circuit inside the passive buzzer component. When controlling, the GND VCC on the block is powered, the signal terminal S inputs square waves of different frequencies (voltage 5V), and controls the buzzer sounds …
3pcs AC110V/220V to DC5V 40A 200W with Fan Switching Power Supply 200*110*50mm$131.26Power Supply ModuleAdd to cart
Technical ParametersProject:Technical indicators:RemarksBasic requirements:5V 40A 200W:Common (With fan)Dimensions:200*110*50mmOperating temperature:-10°C to +50°C, 20% to 95% RH (no condensation)Storage temperature:-20°C to +85°C, 20% to 95% RH (no condensation)Temperature Coefficient:0.02~0.05%/°CHeat dissipation method:Fan assisted coolingRated voltage range:220VAC:ACInput voltage range:110/240V:ACInput frequency range:50~60Hz:Except DC inputInput undervoltage protection:115 to 150% intermittent modeInput undervoltage recovery:Automatic recoveryInput overvoltage protection:115 to 150% intermittent modeInput overvoltage …
10Pcs Rocker Switch with Red LED Light on/off Round Boat Rocker Switch 20A/12V DC$12.14SwitchesAdd to cart
SpecificationVolt:DC 12V,20AType:3 Pins with LEDSPST:ON-OFFLight color:RedFeatures1. Our switch comes with a kyhole slot to prevent unwanted rotation.2. SPST 2 pole design (On/Off) 3rd poles with LED to be connected to earth.3. Functions:It can be applied as the switches for the additional electronical equipment inside&outside the car.(such as flashing lights, chassis lights, and dome lights).4. Application:Car, …
600pcs Light Dependent Resistor LDR 5MM Photoresistor Photoelectric Switch Element Photo Detector 5516$35.48
5pcs TTP224 4CH Channel Capacitive Touch Switch Digital Touch Sensor Module$9.26Sensor & Detector ModuleAdd to cart
>>>Manual:Click here to openFeatureOnboard TTP224 capacitive 4-button touch sensing ICOnboard 4-channel level status indicatorWorking voltage:2.4V-5.5VModule can set output mode, key output mode, maximum output time and fast / low power selectionPCB board size:35 (mm) x 29 (mm)Package includes5 x Touch sensor module