DSTIKE Red/Black Deauther Wristband /Deauther Watch NodeMCU ESP8266 Programmable WiFi Development Board
$46.56
Color1 Red / Color1 Black / Color1 #1 /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Warmly NOTE
The ORANGE color board will be converted to a RED color board,
During the period of version replacement, random delivery. (board color does not affect the function)
What is it
1. Deauther Watch is still an ESP8266 development board, but you can wear it like a smartwatch.
2. This ESP8266 development board comes with a 600mAh battery, OLED display and a 3-way momentary slide switch.
3. It comes installed with the latest ESP8266 Deauther software. With this software, you can perform different attacks to test WiFi networks.
Please note that the ESP8266 does only support 2.4GHz. For more details on the software, visit here.
You can also use it to develop your own software. It is simple to use, just like any other ESP8266 development board.
GPIOs and hardware info
Display:SH1106 1.3inch OLED
Display SDA:GPIO 5 (D1)
Display SCL/SCK:GPIO 4 (D2)
WS2812b LED:GPIO 15 (D8)
Button Up:GPIO 12
Button Down:GPIO 13
Button Select:GPIO 14
High Light LED:GPIO 16
Side Button:GPIO0,GPIO2,RST
Why did you make it
I designed this development board especially for Spacehuhn’s great project: ESP8266 Deauther.
What makes it special
Only 80mA power usage
Up to around 7 hours work time
200 mA charging current
Indicate charging LED (Red means charging, off means full)
Included 8dB antenna and 2dB antenna
Power Switch (Strongly recommend turn it off when charging)
Protection:short, overcharging, over discharging, temperature
Usage
You can use it with the display and buttons.
You can also connect to inchpwnedinch with the password inchdeautherinch and use the web interface.
If you lost the password you can reset it.
Disclaimer
Use it only for testing and educational purposes against your own devices! I don’t take responsibility for what you do with it.
Please check the legal regulations for your country to make sure you don’t violate any laws.
Specs and Docs
CP2102 Driver Download.
Source Code
Documentation
Design Files
Package Included
1 x DSTIKE Orange/Black Deauther Wristband /Deauther Watch ESP8266 Development Board
Weight | 0.05 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.