M5Stack ESP32 Core ink Development Kit with 1.54” Eink Display IoT Terminal E-Book industrial Control Panel
$62.76
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
view the corresponding tutorial&quick-Start.
>>>Click here to open
Description
CoreInk is a brand new E-ink display in the M5Stack cores range. Controlled by the ESP32-PICO-D4 This new device includes a 200×200 1.54′ Black and White E-Ink Display. Compared to a regular LCD,E-ink displays are easier on the eyes, which makes them a great choice for reading or viewing for longer periods. Other benefits are the low power consumption and the ability to retain the image even if power to the display is terminated。For control the CoreInk integrates an multi-function button,A physical button, integrated status LED and buzzer.The device also includes a 390mAh Lipo,RTC(BM8563)for controlling accurate timing and deep sleep funcionality. CoreInk features independent reset and power buttons,expansion ports(HY2.0-4P,M-BUS,HAT expansion)for attaching external sensors to expand functionailty,for unlimited possibilities。
Warning:Please avoid using high refresh rates,reccommended refresh rate is(15s/per refresh), Do not expose to ultraviolet rays for a long time, otherwise it may cause irreversible damage to the ink screen.
Features
ESP32 Standard wireless functions WiFi,Bluetooth
Internal 4M Flash
Low Power Display
180 degree viewing angle
Expansion ports
Built-in Magnet
Internal Battery
Expandable
Package Included
1x CoreInk
1x Type-C USB(20cm)
Application
IoT Terminal
E-Book
Industrial Control Panel
Electronic Tag
Specification
Resource:Parameter
ESP32-PICO-D4:240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth
Flash:4MB Flash
Input Voltage:5V @ 500mA
Ports:TypeC*1, HY2.0-4P*1 , M-BUS Female Connector,Pin Array/ Hat Expansion
Screen:GDEW0154M09 | SPI Port | 200*200@1.54′ | Dpi:184 | 1-bit Black & White(Grayscale:2) |
Viewing Area(mm):27.6×27.6 | Dot pitch(mm) 0.138×0.138 | Refresh Time(s) 0.82 /Partial refresh(s) 0.24
Physical Buttons:Programmable *1 , Reset *1, Power *1
LED:Green LED x 1
RTC:BM8563
Buzzer:Passive Buzzer*1
Wifi:2.4G 3D Antenna
PINS:G25, G26, G36, G23, G34, G18, G21, G22, G14, G13
Battery:390mAh@3.7V
Working Temp:32F to 104F ( 0C to 40C )
Net Weight:32g
Gross Weight:55g
Dimensions:56*40*16mm
Package Size:82*46*20mm
Case Material:Plastic ( PC )
EasyLoader
EasyLoader is a concise and fast program writer, which has a built-in case program related to the product. It can be burned to the main control by simple steps to perform a series of function verification. Please install the corresponding driver according to the device type. M5Core host Please to view the CP210X driver installation tutorial, M5StickC/V/T/ATOM series can be used without driver)
Pin Mapping
E-Ink Display
Screen Resolution:200×200
ESP32 Chip:GPIO4:GPIO0:GPIO15:GPIO9:GPIO18:GPIO23
GDEW0154M09:BUSY:RST:D/C:CS:SCK:MOS1
Multi-function button & Physical Button & LED & Buzzer
ESP32 Chip:GPIO37:GPIO38:GPIO39:GPIO5:GPIO10:GPIO2
Multi-function button:Left position:Button press:Right position:/:/:/
Physical Button:/:/:/:Physical Button:/:/
LED:/:/:/:/:LED:/
Buzzer:/:/:/:/:/:Buzzer
USB Serial
ESP32 Chip:GPIO1:GPIO3
CP2104:RXD:TXD
Internal I2C Connection
ESP32 Chip:GPIO21:GPIO22
BM8563:SDA:SCL
Coreink-HY2.0 4P Port
PORT:PIN:Protocol
EXT-PORT:G32/33:I2C
ESP32 ADC/DAC Mappable Pins
ADC1:ADC2:DAC1:DAC2
8 Channel:10 Channel:2 Channel:2 Channel
G32-39:G0/2/4/12-15/25-27:G25:G26
For more info on specific pin functions refer to the official ESP32 Docs ESP32 datasheet
Related Link
datasheet
ESP32
BM8563
SY7088
GDEW0154M09
API
Arduin API
Example
Arduin IDE
Github Lib & Example
Schematic:Click here to open
Weight | 0.055 kg |
---|
Customers Also Viewed
5Pcs CP2102 USB To TTL/Serial Module Downloader
$21.98Converter BoardAdd to cart5Pcs CJMCU CP2102 USB To TTL/Serial Module UART STC Downloader For Driver Installation Introduction:http://forum.hobbyant.com/forum-topic-56275.html Description CJMCU-CP2102 its highly integrated, built-in USB2.0 full-speed function controller, USB transceiver, crystal oscillator, EEPROM and asynchronous serial data bus (UART), supports full-featured modem signal without any external USB devices. CJMCU-CP2102 works with other USB-UART adapter circuit similar to the driver …
10pcs 180 Degree USB 3.0 Type A female Socket Connector SMT Charging Socket Plug Connector
$10.11Terminal BlocksAdd to cartSpecificationsColorBlueRated Current1.5ARated Voltage30VInsertion Force35N MaxDurability3000 Cycles Min Rubber CorePBT / Icp Ul94V-0 Resistance To Voltage500V Ac Min. Insulation Resistance≥1000MΩPull-Out Force10N Min.Initial 8-20N AfterWorking Temperature-20 Degrees To 60 Degrees Contact Impedance≤30mΩTerminalsBrass C2680,Nickel Base,Gold-Plated 1 u,Package included-10pcs X 180Degree Connectors
Dual Servos Knob Serial Port Control Board Futaba MG995 SG90 Steering Gear Debugging Module
$13.11Other Module BoardAdd to cartFeature1. The onboard stable 8-bit MCU is used to generate high-resolution PWM signals with precise control.2. Support manual mode and return to medium mode, switch by button, with mode indicator.3. Support knob adjustment or serial command control in manual mode.4. The serial port command control can use the matching host computer software or connect to …
Dual Servos Knob Serial Port Control Board Futaba MG995 SG90 Steering Gear Debugging ModuleRead More
Keyes Brick Laser Head Sensor Module (pad hole) with Pin Header Board Digital Signal
$4.36Sensor & Detector ModuleAdd to cartDescriptionThis sensor is fully compatible with ARDUI NO single-chip microcomputer, and its connection port is also compatible with Arduino sensor expansion board. It is mainly composed of a laser head, which is composed of a light-emitting tube core, a condenser lens, and a copper adjustable sleeve. After connecting to the power supply, we directly input …
Keyes Brick Laser Head Sensor Module (pad hole) with Pin Header Board Digital SignalRead More
5pcs DC3~5V AK-119 433.92MHZ 4 Pin Superheterodyne Receiver Board without Decoding -105dBm
$10.37Other Module BoardAdd to cartFeatures1. The product is small in size, high in sensitivity and strong in anti-interference ability;2. The same definition as the four-pin pin of RXB12, the usage is the same. The unit price is lower than RXB12 and can be directly replaced.Technical ParametersWorking voltage:DC3~5VTransmission rate:4.80KBPSQuiescent current:6mAReceive sensitivity:-105dBmDimensions:30 * 9 * 5mmWorking temperature:-20 ° C ~ +80 …
5pcs DC3~5V AK-119 433.92MHZ 4 Pin Superheterodyne Receiver Board without Decoding -105dBmRead More
150g Capacity Quartz Silica Melting Crucible Pot for Gold Silver Platinum Refine
$16.19Glassware KitAdd to cart150g Capacity Quartz Silica Melting Crucible Pot For Gold Silver Platinum RefineDescriptionMaterial:quartzCapacity:150gDiameter:43X57mm/1.69inch X2.24inch(ID*OD)Height:20mm/0.79inchDeepth:15mm/0.59inchNet Weight:40gFeatureQuartz silica melting crucibleProduced by modern ceramic processing technologyHigh orrosion resistance and strength,the temperature resistance up to 2800℃/5072FPerfect for gold silver casting and refine usagePackage included1X Quartz Silica Melting Crucible
WXD3-13-2W Precision Potentiometer 470R 470 Ohm Wirewound Multi-Turn Potentiometer
$4.50Module ComponentsAdd to cartSpecificationsResistance range:470┯Resistance tolerance:÷ 5%Rotation angle:3600 ÷ 20 Number of laps:10 lapsRated voltage:160VStarting torque:3.5 ~ 100mN.mRated power:2W (85 →) 0W (125 →)Linearity accuracy:÷ 0.3%Mechanical durability:10,000 weeksPackage included1 x Potentiometer
Reviews
There are no reviews yet.