10Pcs inverter Boost High Voltage Generator 15KV High Frequency Transformer
$55.49
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Use
School science experiment, electronic equipment, negative ion generator, small scientific production and so on.
Feature
This circuit works to produce a stable high-frequency arc, the temperature is extremely high, can easily ignite the combustible, so it was called a plasma lighter.
Note
This transformer high voltage winding in the inner layer, is the segment skeleton wound, low voltage winding in the outer layer, please do not mistaken for this transformer is high voltage winding and low voltage winding the same way.
The transformer has two primary winding, one of the main group is coarse copper wire, a group of fine copper wire for the feedback winding. The secondary output is high voltage.
Transformers in a coarse and a thin winding together two copper wire is positive, respectively, the main winding tail and feedback winding head, connect the power supply positive.
Before soldering the transformer, the soldering part of the enameled wire head of the paint need to gently scraping with blade and then soldering, please note.
Precautions for product use
1. After the successful production, the transformer must be sealed with epoxy resin or insulating wax to be used for a long time. The air-borne work in the air will cause the coil to break through damage due to the lack of air insulation.
2. The input voltage of the kit is 3.7v. That is, a section 18650 battery voltage, if you need to increase the input voltage (maximum increase to 12V), you need to increase the feedback resistor resistance (we default send 120 ohm), otherwise the transistor is easy to burn. Feedback resistance increased to 150Ω ~ 1.5KΩ or so, the resistance should be adjusted from large to small, do not too small, otherwise will burn transistor or transformer, and should not be too large, too much will impact the output or make the transistor work in the non-switch state to make the fever is serious hot.
transformer design for the 15KV maximum output, which is 1.5 cm arc, the higher the output voltage is likely to damage the transformer. For reliable long-term continuous work, it is recommended to use insulating wax or epoxy resin to completely seal it, prohibit no-load working when no sealed.
Specification
Input voltage:3.7V-4.2V
Current
Output voltage
Output current
High pressure two-stage ignition distance
Size is about:27 x 16 x 21mm (Manual measurement, please understand the error)
Package includes
10 x High Voltage Generator Kit
Schematic diagram
In order to prevent the output 2-line distance too far, resulting in no-load, you can solder a pin in the output, and put the end of the needle into the arc, is conducive to the discharge arc, lik the following show
After the success of the production, if the output terminal connected to a high-voltage capacitor and three high voltage rectifier composed of voltage doubling circuit, can produce DC high voltage, can produce anion generator, the wiring diagram is as follows:
Weight | 0.18 kg |
---|
Customers Also Viewed
6Pcs Pulse Power Supply Plug Connector Pigtail for Polaris Ranger XP1000 & RS1 2018 2019
$30.36ConnectorsAdd to cartSpecificationColor:As the pictures shownQuantity:6 PcsFitmentFor New Polaris Ranger XP 1000 3 SeaterFor Polaris Ranger and Polaris RS1For Polaris Ranger Crew XP 1000 EPS 2018 (Any Machine with Pulse Style Connector)For Polaris Ranger XP 1000 EPS 2018 (Any Machine with Pulse Style Connector)Features– Easy to Install.– Fully sealed and weather proof.– Plugged right in and seals …
6Pcs Pulse Power Supply Plug Connector Pigtail for Polaris Ranger XP1000 & RS1 2018 2019Read More
900pcs PH2.0 2p 3p 4 pin 2.0mm Pitch Terminal Kit / Housing / Pin Header JST Connector Wire Connectors Adaptor PH Kits
$21.69Electronic Accessories & SuppliesAdd to cartDescription2pin = 20 sets = 120pcs3pin = 20 sets = 120pcs4pin = 20 sets = 120pcsPin Connector Terminal:540 pcsTotal:60set(900pcs)Package included3 x 300pcs PH2.0 2p 3p 4 pin 2.0mm Pitch Terminal Kit
PortaPack H1 with TCXO Touch Screen for HackRF one 1MHz-6GHz SDR Receiver and Transfer Board AM FM SSB ADS-B SSTV Ham Radio Transceiver
$223.22Motherboard & Development BoardAdd to cartShell:Product ID:1566465FeatureNote:This version includes TCXO.WIKI:https://github.com/sharebrained/portapack-hackrf/wikiFAQ:Black screenSolution:The program is not burned, please install the program:to openThe PortaPack attaches to your HackRF and adds a touchscreen display, navigation controls, headphone jack, a real-time clock, and a micro SD card slot.Just add a USB battery, and yoursquore ready to explore the radio spectrum wherever you are. The PortaPack …
Yahboom Ultrasonic Module for Microbit Ranging
$15.35Smart Robot & Solar PanelAdd to cartIntroduction of Ultrasonic moduleMore info for you to download1.Working principleThe ultrasonic module is a sensor that uses ultrasonic characteristics to detect the distance. It has two ultrasonic probes for transmitting and receiving ultrasonic waves. The range of measurement is 3-450 cm.3-1 Ultrasonic emission and reception schematic(1) You need to input a high level signal of …
2 Channel Port 180-240V ON/OFF Wireless Digital Remote Control Light Wall Switch 20M
$10.92Smart ModuleAdd to cartFeaturesEasy to operate which can fully turn on or turn off the whole circuit.With the capability of penetrating walls and anti-disturbance.Fast and easy installation, not obstructed by walls, capable of connecting any loadsRemote controller and switch can be used simultaneously for ease and flexibilityEquipped with high load relay,high voltage capacitor and high quality receiver.Apply electrical:Droplight, …
2 Channel Port 180-240V ON/OFF Wireless Digital Remote Control Light Wall Switch 20MRead More
W5500 Ethernet Module LAN Network Module with Logic 3.3V/5V Shield
$22.50Smart ModuleAdd to cartFeatureThe W5500 – Ethernet LAN Network Module can be used to provide your projects with internet connectivity. The W5500 module enables users to have Internet connectivity in their applications just by using the single chip in which TCP/IP stack, 10 / 100 Ethernet MAC and PHY embedded. Supports 8 independent sockets simultaneously.The W5500 Ethernet module …
W5500 Ethernet Module LAN Network Module with Logic 3.3V/5V ShieldRead More
2.4G NF-04 Wireless SPI Module BK2425 250k~2Mbps Transparent Transmission Receiver for Doorbell Remote Control Switch
$3.60Smart ModuleAdd to cartIntroductionNF-04 is a 2.4G wireless module with small size and on-board antenna. It has a high airspeed (up to 2Mbps), SPI interface, and a pure hardware module. It has high stability, high cost performance and good spectrum test characteristics. , small size, using all industrial grade components.NF-04 can be widely used in various Internet of …
Reviews
There are no reviews yet.