ESP32-CAM WiFi + bluetooth Development Board ESP32 with FT232RL FTDI USB to TTL Serial Converter 40 Pin Jumper
$34.98
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
[ESP32-CAM Wireless Module]
Description
1. ESP32-CAM is a WIFI+ bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system.
2. ESP integrates WiFi, traditional bluetooth and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency adjustment range 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc.
3. Fully compliant with WiFi 802.11b/g/n/e/i and bluetooth 4.2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other host MCUs to add networking capabilities to existing devices.
4. ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.
Features
– Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
– Low-power dual-core 32-bit CPU for application processors
– Up to 240MHz, up to 600 DMIPS
– Built-in 520 KB SRAM, external 4M PSRAM
– Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
– Support OV2640 and OV7670 cameras with built-in flash
– Support for images WiFI upload
-Support TF card
– Support multiple sleep modes
– Embedded Lwip and FreeRTOS
– Support STA/AP/STA+AP working mode
– Support Smart Config/AirKiss One-click distribution network
– Support for serial local upgrade and remote firmware upgrade (FOTA)
– Support secondary development
Note
This product contains the OV2640 Camera Module. If you need to use the OV7670 camera, please purchase it separately.
Product Specifications
Module model:ESP32-CAM
Package:DIP-16
Size:27*40.5*4.5(±0.2)mm
SPI Flash:default 32Mbit
RAM:internal520KB+external 4M PSRAM
bluetooth:bluetooth4.2BR/EDR and BLE standards
Wi-Fi:802.11 b/g/n/e/i
Support interface:UART, SPI, I2C, PWM
Support TF card:Maximum support 4G
IO port:9
Serial port rate:default 115200 bps
Image output format:JPEG (only supported by OV2640), BMP, GRAYSCALE
Spectrum range:2412 ~ 2484MHz
Antenna form:onboard PCB antenna , gain 2dBi
Transmit power:802.11b:17±2 dBm (@11Mbps)
802.11g:14±2 dBm (@54Mbps)
802.11n:13±2 dBm (@MCS7)
Receiving sensitivity:CCK, 1 Mbps:-90dBm
CCK, 11 Mbps:-85dBm
6 Mbps (1/2 BPSK):-88dBm
54 Mbps (3/4 64-QAM):-70dBm
MCS7 (65 Mbps, 72.2 Mbps):-67dBm
Power consumption:Turn off the flash:180mA@5V
Turn on the flash and adjust the brightness to the maximum:310mA@5V
Deep-sleep:The lowest power consumption can reach 6mA@5V
Moderm-sleep:up to 20mA@5V
Light-sleep:up to 6.7mA@5V
Security:WPA/WPA2/WPA2-Enterprise/WPS
Power supply range:5V
Operating temperature:-20 °C ~ 85 °C
Storage environment:-40 °C ~ 90 °C,
ESP32-CAM Picture Output Format Rate
:QQVGA:QVGA:VGA:SVGA
JPEG:6:7:7:8
BMP:9:9:-:-
GRAYSCALE:9:8:-:-
Test environment:camera model:OV2640 XCLK:20MHz, the module transmits pictures to the computer browser by WiFi.
For more files, please:file
[FT232RL Module]
FTDI USB Serial Adapter comes with the FT232RL chip and uses both 3.3V and 5V operating voltage. Adapter Logic-level can be set via jumpers on the board, which makes simple to connect to your controller. USB power has over current protection, using 500MA self-restore fuse. You can use the modules in this kit to burn the program directly without additional purchase.
[Female to Female Dupont Jumper Wires]
The Jumper wires are made of high-grade copper wire material for safe and durable to use. This set contains 20cm 40pin male to male Jumper Wires, with which you can easier to complete the project.
Package Included
1 x ESP32-CAM Module
1 x Camera Module OV2640 2MP
1 x FT232RL Module
1 x Female to Female Dupont Jumper Wires
Weight | 0.046 kg |
---|
Customers Also Viewed
DIY AC100-240V 10A Smart Home Breaker Remote Control Switch Module Support ALEXA Voice Control
$21.86Smart ModuleAdd to cartParametersInput:AC 100-240V 50/60Hzmax output:10Aoutput:AC 100-240V 50/60Hzstandby mode:0.3Woperation temp:-30~70°CFunctionsupport ALEXA voice control, APP voice controlAPP remote controlon / off statusAPP setup timer, delay switchShare config with others memberseach APP support 150 smart-home deviceSupport French, Simplified Chinese, Traditional Chinese, English, Spanish, ArabicCaution1. Please follow user guide installation2. Please keep environment without wireless frequency when it is in …
3pcs Green ST16VD 22mm Hole Size 6-100 VDC Digital Voltmeter Round Voltage Detector Tester Mini LED Voltage indicator Signal Light Monitor
$12.23Electronic Accessories & SuppliesAdd to cartDescriptionDisplay type:digital onlyMaterial:Electrical ComponentsColor:Green22 mm Digital DisplayRated Frequnency:50/60 HzMeasuring Range:6-100 V DCRated Power:0.5WMechanical life:1 million timesElectrical life:500000 timesSize:2.8*5cm /1.10inch*1.97inch (D*H)Accuracy Class:highNotePlease allow 1-3mm error due to manual measurement.pls make sure you do not mind before you bid .Due to the difference between different monitors,the picture may not reflect the actual color of the item.Package included3 …
110-250V 10A Travel Universal Adapter Plug Socket Power Adapter
$22.26SwitchesAdd to cartSpecificationsPower input:100-250VCurrent:10AMaterial:ABS PlasticColor:WhiteSize:74mm*50mm*39mm(approx.)FeaturesThis item with fit the plugs in Europe/UK/USA/China/Japan/Australia/Spain and alomost every country in th world.This universal adaptor is a compact one piece unit with 4 international adpators,and provides a child protection safety shutter,power indicator light and surge protector.Tips-This unit does not convert voltage.-Keep this away from children.-Make sure your hands are dry before …
110-250V 10A Travel Universal Adapter Plug Socket Power AdapterRead More
20pcs 3.3V 5V 8 Bit Blue Common Anode LED indicator Display Module DIY Kit
$38.52Display ScreenAdd to cartDescriptionIt can be inserted directly into Breadboard,Ideal for linking up to your Arduiuo UNO Mini Nano Mega2560 DUE Breadboard etc,or others MCU ( AVR STM32 ARM7 ARM9 ARM10 ARM11 PIC C8051 STC MSP430 FPGA/CPLD etc.) SpecificationsColor:BlueWorking Voltage:DC 3-24VPolarity:Common anodeInterface:2.54MM with PIN/2.54MM no PINSize:22.86 x 14.13 x 2.11 mmWeight:1.3gApplicationMCU/ARM/FPGA/Atmega328pPLC MotorElectronic diy kitESP8266/nodemcuNANO/UNO/MEGA2560/BreadboardRaspberry pi 4/robotPackage Incldued20 x …
20pcs 3.3V 5V 8 Bit Blue Common Anode LED indicator Display Module DIY KitRead More
Periscope Model Laboratory Detachable Optical Reflection School Teaching Physics Experiment
$32.39PhysicsAdd to cartFeaturesLearning PointReflection principle of lightRectilinear propagation of light– Physical optical reflection teaching tools.– 360° Rotatable lens, quick detachable, expandable. – Train your children observation capability, thinking and analytical skills.Package Included1 x Periscope Model
USB LED Light Lighting Kit ONLY for Lego 42056 911 GT3 RS Bricks Toys
$19.67DIY Electronic KitsAdd to cartDescriptionThe Product Is Just a Light Kit, Not Included The Model!!!Interface:USBColor:As the picture shownFitmentONLY For Lego 42056 911 GT3 RS Bricks ToysFeaturesEasy to install.LED powered by USB.Make your model more cool.Package Included1 x LED Light Kit(Model Not Included)
Reviews
There are no reviews yet.