Flame Flare Detection Module Flame Sensor 12V Relay Board infrared Receiver Module
$7.11
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Usage
Various flames, fire source detection, relay output, can be connected to 220V high current equipment
Features
1. It can detect flame or light source with wavelength in the range of 760 nm to 1100 nm. The flame distance of the lighter is 80 cm. The larger the flame, the farther the test distance is.
2. The detection angle is about 60 degrees, especially sensitive to the flame spectrum
3. The sensitivity is adjustable (blue digital potentiometer adjustment in the figure)
4. The comparator output directly triggers the relay
5. The external dimensions:50x26x19mm, with fixed bolt holes for easy installation
6. The output has a blue terminal block, convenient wiring
Electrical parameters
Supply voltage:12VDC
Current:greater than 150mA
Load:250V 10A AC or 30V 10A DC
Instructions for use
1. The flame sensor is most sensitive to the flame and also responds to the sunlight. It is generally used for flame alarms and other purposes.
2. By adjusting the potentiometer, the intensity of the sensor’s induced flame can be set. When the flame exceeds the set threshold, the relay is closed, the common end is connected to the normally open end, and when the flame is lower than the set threshold, the relay is disconnected. The common end is connected to the normally closed end;
3. The common end, normally open, normally closed three ports are equivalent to a dual control switch, when the relay coil is powered, the common end is open to the normally open end, when there is no electricity, the common end and the normally closed end are turned on;
4. The sensor and the flame should be kept at a certain distance to avoid damage to the sensor at high temperature. The flame distance of the lighter is 80cm. The larger the flame, the farther the test distance is.
Package includes
1 x Flame sensor module
Weight | 0.017 kg |
---|
Customers Also Viewed
12pcs DC3-6V Dual Axis L-Type TT Motor DC Geared Motor for Car
$43.70Smart Robot & Solar PanelAdd to cartSpecificationsRatio of 1:120Working voltage:3V ~ 6VNo-load current voltage:6V ≤250mA , 3V ≤160mA No-load speed:250 ± 10% rpm @ 6V , 110 ± 10% rpm @ 3VWith dual axisPackage Included12 x TT motor
13Pcs 100R-1M Each 1 3362 Potentiometer Package 3362P Adjustable Resistor
$6.55Electronic Accessories & SuppliesAdd to cartDescription3362 potentiometer package Adjustable resistance package 100R-1M Each of 13 total.100R (101)200R (201)500R (501)1k (102)2k (202)5K (502)10K (103)20K (203)50K (503)100K (104)200K (204)500K (504)1M (105)Package included13 x 100R-1M 3362 Potentiometer
GT-24 Digital Wireless Module 2.4G NRF24L01 PA LNA industrial Grade 1100M Long Distance with Welding
$10.92Smart ModuleAdd to cartSpecificationModel:GT-24Module size:30.3 * 14.5mm (including PCB antenna)Operating frequency band:2.4GHz ~ 2.525GHz (adjustable, 1MHz step)Interface mode:1*8*1.27mm/2*4*2.54mm (The patch can also be used with the universal board and DuPont line)Supply voltage:DC 2.0-3.6V (Note:above 3.6V, the module will be permanently damaged)Communication level:0.7VCC ~3.3V (VCC refers to the module supply voltage)Measured distance:1000m (clear open space, maximum power, height 2m, …
Full SMD Welding Practice Board Kit SMD Lucky Turntable Flow Lamp DIY Soldering Skill Training Parts
$46.53DIY Electronic KitsAdd to cartFeaturePower supply voltage:5V DCBoard size:80*60mm Board thickness:1.6mmBoard material:Standard plate, all pads are tinned, fireproof and anti-powder materials, can be disassembled repeatedly.Net weight:24gNoteThis product is a spare part, and the buyer needs to weld and assemble it by himself. (instruction not includes)Package includes1 x DIY KIT
HBV-1822 8 Million Pixel Camera Module 8MP Auto Focus Lens USB Camera Board with UY2/MJPEG Output format
$71.06Other Module BoardAdd to cartSpecificationsModel No.:HBVCAM-1822Model Size:38mm ≠ 38mm ≠ 6.75mm÷0.2MMTemperature (Operation):-30C to 70CTemperature (Stable Image):0C to 50CAssembly technique:SMT (ROSH)Focus:AutoObject distance:30CM-infinitResolution:800LW/PH (Center)PCB printing ink:Blackinterface:USB 2.0Power supply:USB bus powersupply voltage:DC 5V÷5%Maximum Power consumption:1000 mWOperating system request:Win XP/win 7,8 / vista /android 4.0/ mac /Linuxwith uvc Sensor:IMX179 (1/3.2” )Seneor Package:CSP,Bare DieMaximum resolution:3264*2448Sensitivity:700mv /(lux-sec)Pixel Size:1.4┢m x 1.4┢m Maximum Image Transfer Rate:MJPEG 640×480 …
TPA3255 2.0 Digital Amplifier Board DC50V Strong High Power 300W + 300W Class D Digital Amplifier Board
$109.31Amplifier BoardAdd to cartProduct DescriptionModel:TPA3255Work:Class DQuiescent current:60mAWork efficienc:more than 90%DC 35-50V (can not exceed 50V)The current need more than 7.5AFrequency response:20Hz to 20KHzDynamic range:more than 100 dBSignal to noise ratio:(SNR) more than 111dBOutput Power315W / 4 ohm, distortion 10%185W / 8 ohm, distortion 10%260W / 4 ohm, distortion 1%150W / 8 ohm, distortion 1%Operating voltage:DC 50VColour:picture colorMaterial:ABSSize:149 x …
0.36 inch 4-digit LED Display Module TM1637 Driver Tube
$6.55LED BoardAdd to cartFeatureThe 4-digit LED Display Module integrates a 0.36′ 4-Digit 7-Segment Display Common Anode with 12 pins. It uses the driver chip TM1637.The module has 4 control pins of 2.54mm pitch, which can direct connect to microcontroller with jumper wires.So it’s very easy to control the matrix without tons of wiring. Available to make microcontroller control …
0.36 inch 4-digit LED Display Module TM1637 Driver TubeRead More
Reviews
There are no reviews yet.